Grey Dodge Charger Scat Pack on dark wheels in a Yorkshire Dales lay-by

Dodge Charger LD 2011-2023.
The coilover guide.

Shop the coilovers

BC Racing lists separate kits for the rear-drive Charger and the Scat Pack. Confirm the version and whether the car has adaptive dampers.

Which Charger LD 2011-2023 do you have?2 listed kits · 1 brandReviewed 21 November 2026

Dodge Charger LD history

The LD Charger ran from 2011 to 2023 as Dodge's four-door rear-drive saloon, with a full-width rear lamp and engines from the V6 to the supercharged Hellcat. BC lists BCR-Z-05 for the rear-drive Charger from 2011 to 2023 and BCR-Z-11 for the Scat Pack from 2011.

Both have default rates of 10 kg/mm front and 14 kg/mm rear.

Dodge restyled the Charger for 2011 with the racetrack tail lamp and a new interior, keeping the rear-drive platform shared with the Chrysler 300 and Challenger.

The Scat Pack, with the 6.4-litre Hemi, arrived in 2015, and the supercharged Hellcat the same year. Some high-performance versions have adaptive dampers, and all-wheel drive was offered on V6 and R/T cars.

Production ended in 2023. UK cars are imports, so confirm the version from the VIN.

Start with your Charger LD 2011-2023.

Confirm the chassis, year and existing suspension before choosing your setup.

White Dodge Charger on silver wheels on a country lane

Rear-drive Charger

BC lists BCR-Z-05 for the rear-drive Charger from 2011 to 2023 under LD, at 10 kg/mm front and 14 kg/mm rear. Give the supplier the VIN and engine.

Check my Charger
Black Dodge Charger Scat Pack outside a modern workshop

Scat Pack

BC lists BCR-Z-11 for the Charger Scat Pack from 2011 under LD. Confirm the version and whether the car has adaptive dampers.

Check my Scat Pack
Grey Dodge Charger Scat Pack in a Yorkshire Dales lay-by

All-wheel drive and Hellcat

BC's listings name rear-drive cars and the Scat Pack. Ask the supplier before ordering for an all-wheel-drive car, a Hellcat or a widebody.

Check my AWD Charger

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · BC Racing Z-05, subject to an application check

BC lists BCR-Z-05 for the rear-drive LD Charger. Confirm the version first.

Read the buying advice

BCR-Z-05 is a possible starting point once the supplier has confirmed fitment. It has 30-way rebound adjustment and height set separately from spring preload. Keep the drop modest on a heavy saloon and include alignment.

  • Confirm rear-drive
  • Keep the drop modest
  • Include alignment
View current configurations
Selected configurationSee optionsinc. VAT · BC Racing Z-11, subject to an application check

BC lists BCR-Z-11 for the Scat Pack.

Read the buying advice

The Scat Pack has its own BC reference. Confirm the version and damper type, agree a modest height and include alignment.

  • Confirm the Scat Pack
  • Check the damper type
  • Include alignment
View current configurations

If you are changing wheels too, plan both so the tyres clear the arches.

Read the buying advice

Give the fitter the new wheel and tyre sizes before setting the height. Check clearance through full steering lock and suspension travel, and set the alignment last.

  • Give wheel and tyre sizes
  • Check clearance on lock
  • Set alignment last
Discuss wheels and suspension for my Charger

Know how the rear works

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Dodge Charger, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The LD Charger has a multi-link rear with the spring separate from the damper. BC lists default rates of 10 kg/mm front and 14 kg/mm rear; because the springs sit in different positions, the figures are not a direct comparison of stiffness at the wheel.

Check the alignment at the final ride height.

Read about ride height and spring preload
Red Dodge Charger standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the version and dampers

Check the VIN to confirm the version, drivetrain and whether the car has adaptive dampers.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Charger LD 2011-2023 range.

Compare the controls and hardware included in each range.

BC Racing

BCR-Z-05 is listed for the rear-drive Charger from 2011 to 2023 and BCR-Z-11 for the Scat Pack from 2011, both under LD. Both have 30-way rebound adjustment and default rates of 10 kg/mm front and 14 kg/mm rear.

View BC Racing Charger LD 2011-2023 kits

Find your Charger LD 2011-2023 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

2 listings

Selected application: All Charger LD 2011-2023 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All Charger LD 2011-2023 kit links and part numbers

Before you order.

  1. Identify your car

    Send the VIN, version, drivetrain and damper type.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Dodge Charger LD 2011-2023 coilovers.

Check the details before choosing your kit.

Which kit fits my Charger?

BCR-Z-05 for rear-drive cars and BCR-Z-11 for the Scat Pack. Confirm the version.

Does it fit the 2006-2010 Charger?

No. The LX Charger has its own references.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Charger. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Charger's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.