Black Dodge Charger SRT-8 saloon on dark wheels in a Cotswolds lay-by

Dodge Charger LX 2006-2010.
The coilover guide.

Shop the coilovers

BC Racing lists separate kits for rear- and all-wheel-drive LX Chargers. Confirm the drivetrain, then keep the drop sensible for a heavy saloon.

Which Charger LX 2006-2010 do you have?2 listed kits · 1 brandReviewed 21 November 2026

Dodge Charger LX history

The LX Charger brought the name back in 2006 as a four-door rear-drive saloon, with the SRT-8's 6.1-litre Hemi at the top of the range. BC lists BCR-Z-01 for the rear-drive SRT-8 from 2006 to 2010 and BCR-Z-04 for the all-wheel-drive car from 2007 to 2010.

Both have default rates of 10 kg/mm front and 14 kg/mm rear.

Dodge launched the LX Charger for 2006 on the rear-drive platform it shared with the Chrysler 300 and Dodge Magnum. Engines ran from V6s to the 5.7-litre Hemi and the SRT-8's 6.1-litre Hemi.

All-wheel drive was offered on some V6 and Hemi versions from 2007. The car was replaced by the restyled LD Charger in 2011.

UK cars are imports. Confirm the drivetrain and version from the VIN.

Start with your Charger LX 2006-2010.

Confirm the chassis, year and existing suspension before choosing your setup.

Red Dodge Charger on silver wheels on a village street

Rear-drive SRT-8

BC lists BCR-Z-01 for the rear-drive Charger SRT-8 from 2006 to 2010 under LX, at 10 kg/mm front and 14 kg/mm rear. Give the supplier the VIN and engine; ask about other rear-drive versions.

Check my rear-drive Charger
Silver Dodge Charger outside a modern workshop

All-wheel drive

BC lists BCR-Z-04 for the all-wheel-drive Charger from 2007 to 2010. Confirm the drivetrain before ordering.

Check my AWD Charger
Black Dodge Charger SRT-8 in a Cotswolds lay-by

Other versions

BC's listings name the SRT-8. For a V6 or R/T, ask the supplier to confirm the kit and rates.

Check my Charger R/T

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · BC Racing Z-01, subject to an application check

BC lists BCR-Z-01 for the rear-drive SRT-8. Confirm the drivetrain first.

Read the buying advice

BCR-Z-01 is a possible starting point once the supplier has confirmed fitment. It has 30-way rebound adjustment and height set separately from spring preload. Keep the drop modest on a heavy saloon and include alignment.

  • Confirm rear-drive
  • Keep the drop modest
  • Include alignment
View current configurations
Selected configurationSee optionsinc. VAT · BC Racing Z-04, subject to an application check

BC lists BCR-Z-04 for the all-wheel-drive car. The rear-drive kit will not suit it.

Read the buying advice

The all-wheel-drive Charger has its own kit. Confirm the drivetrain, agree a modest height and include alignment.

  • Confirm all-wheel drive
  • Keep the drop modest
  • Include alignment
View current configurations

If you are changing wheels too, plan both so the tyres clear the arches.

Read the buying advice

Give the fitter the new wheel and tyre sizes before setting the height. Check clearance through full steering lock and suspension travel, and set the alignment last.

  • Give wheel and tyre sizes
  • Check clearance on lock
  • Set alignment last
Discuss wheels and suspension for my Charger

Know how the rear works

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Dodge Charger, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The LX Charger has a multi-link rear with the spring separate from the damper. BC lists default rates of 10 kg/mm front and 14 kg/mm rear; because the springs sit in different positions, the figures are not a direct comparison of stiffness at the wheel.

Check the alignment at the final ride height.

Read about ride height and spring preload
White Dodge Charger standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the drivetrain

Check the VIN to confirm whether the car is rear- or all-wheel drive and which engine it has.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Charger LX 2006-2010 range.

Compare the controls and hardware included in each range.

BC Racing

BCR-Z-01 is listed for the rear-drive Charger SRT-8 from 2006 to 2010 and BCR-Z-04 for the all-wheel-drive car from 2007 to 2010, both under LX. Both have 30-way rebound adjustment and default rates of 10 kg/mm front and 14 kg/mm rear.

View BC Racing Charger LX 2006-2010 kits

Find your Charger LX 2006-2010 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

2 listings

Selected application: All Charger LX 2006-2010 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All Charger LX 2006-2010 kit links and part numbers

Before you order.

  1. Identify your car

    Send the VIN, engine and drivetrain.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Dodge Charger LX 2006-2010 coilovers.

Check the details before choosing your kit.

Which kit fits my Charger?

BCR-Z-01 for the rear-drive SRT-8 and BCR-Z-04 for all-wheel drive. Check the drivetrain.

Does it fit the 2011-on Charger?

No. The LD Charger has its own references.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Charger. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Charger's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.