
Dodge Viper RT/10 1992-1995.
The coilover guide.
Shop the coiloversThe first Viper is now a collectable car. BC Racing lists one kit for it; check the car's condition and keep the original parts.
Dodge Viper RT/10 history
The Dodge Viper RT/10 went on sale in 1992 as an open two-seater with an 8.0-litre V10 and no driver aids. BC lists BCR-Z-10 for the 1992-1995 car, with default rates of 10 kg/mm front and 16 kg/mm rear.
Later Vipers have their own guides. Most UK cars are imports, so confirm the model year and specification first.
Dodge showed the Viper as a concept in 1989 and put the RT/10 roadster into production in 1992. It had a tubular steel frame, a V10 engine and side-exit exhausts.
The first cars had no exterior door handles, side windows or air conditioning as standard. The GTS coupe and revised roadster followed from 1996.
Early cars are increasingly valued in original condition, so many owners keep the factory parts.
Start with your Viper RT/10 1992-1995.
Confirm the chassis, year and existing suspension before choosing your setup.

1992-1995 RT/10
BC lists BCR-Z-10 for the 1992-1995 Viper, with default rates of 10 kg/mm front and 16 kg/mm rear. Give the supplier the model year and any previous suspension changes.
Check my RT/10
Classic and event use
For shows and fast road driving, keep the height modest and the damping near the middle of its range. Ask BC about rates for track days.
Check my Viper for events
1996-on Vipers
The 1996-on Viper uses different BC references, BCR-Z-03 or BCR-Z-07 depending on the rear fork size. See the second-generation guide.
Check my later ViperChoose a kit for your car and driving
Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.
BC lists BCR-Z-10 for the Viper. Have the application checked before ordering.
Read the buying advice
BCR-Z-10 is a possible starting point once the supplier has confirmed fitment. It has 30-way rebound adjustment and height set separately from spring preload. Keep enough travel for the roads you use, and include alignment.
- Confirm the engine and build date
- Leave room for suspension movement
- Include alignment
If you are changing wheels too, plan both so the tyres clear the arches at the new height.
Read the buying advice
Give the fitter the new wheel and tyre sizes before setting the height. Check clearance through full steering lock and suspension travel, and have the alignment set once the height is final.
- Give wheel and tyre sizes
- Check clearance on lock
- Set alignment last
Have the frame, mounts and bushes checked first, and keep the original dampers and springs.
Read the buying advice
Ask a Viper specialist to inspect the frame, suspension mounts and bushes. Fix any problems first, keep the original parts, and set the alignment last.
- Inspect the mounts
- Keep original parts
- Set alignment last
Know how the suspension is laid out
On a standard Dodge Viper, the rear spring and shock absorber are mounted separately.
Layout only. Mounts and spring seats vary by kit.The Viper uses double wishbones at each corner with a coil-over damper, so a coilover kit replaces like with like. BC lists default rates of 10 kg/mm front and 16 kg/mm rear.
Ask BC what the kit supplies at the upper and lower mounts, and check the alignment at the final ride height.
Read about ride height and spring preload
Plan the fitting before the car arrives
Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.
Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.
Confirm the model year
Check the model year and VIN, and note any earlier suspension changes, before ordering.
Measure the wheel and tyre clearance
Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.
Leave travel for normal use
Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.
Set the geometry after the height
Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.
The current Viper RT/10 1992-1995 range.
See the controls and hardware in the listed kit.
BCR-Z-10 is listed for the 1992-1995 Dodge Viper. It has 30-way rebound adjustment and default rates of 10 kg/mm front and 16 kg/mm rear. Ask BC to confirm the exact car and the supplied mounts.
View BC Racing Viper RT/10 1992-1995 kitsFind your Viper RT/10 1992-1995 coilovers.
Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.
1 listing
Selected application: All Viper RT/10 1992-1995 applications
Match the drivetrain, body style and axle-load limits on the product page before ordering.

BC Racing · BCR-Z-10
BC Racing Coilovers - Dodge Viper (92-95)
Check the exact application
All Viper RT/10 1992-1995 kit links and part numbers
Before you order.
Identify your car
Send the VIN, model year and any previous suspension changes.
Match the kit
Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.
Check what’s included
Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.
Check your modifications
Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.
Plan fitting
Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.
Questions about Dodge Viper RT/10 1992-1995 coilovers.
Check the details before choosing your kit.
Does it fit a 1996-on Viper?
No. Later cars use BCR-Z-03 or BCR-Z-07. Check the rear fork size.
Should I keep the original parts?
Yes. Early Vipers are valued in original condition, so keep the factory dampers and springs.
How low should I set the car?
Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Viper. Check the alignment at the final height.
When should I book fitting?
Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.
Let’s talk suspension.
Send the Viper's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.



