Blue Dodge Viper GTS coupe with white stripes on dark wheels in a Peak District lay-by

Dodge Viper second generation 1996-2002.
The coilover guide.

Shop the coilovers

BC Racing lists two Viper kits that differ by rear fork size, so measure before ordering. Nitron lists R1 and R3 kits for the second-generation car.

Which Viper second generation 1996-2002 do you have?6 listed kits · 2 brandsReviewed 21 November 2026

Dodge Viper second-generation history

The second-generation Viper arrived in 1996 with the GTS coupe and a revised RT/10 roadster. BC lists BCR-Z-03 for cars with a 97.5 mm rear fork and BCR-Z-07 for an 85.5 mm fork, both for 1996-2008 cars at 10 kg/mm front and 12 kg/mm rear.

Nitron lists R1 and R3 kits for the Gen 2 Viper, each with or without a front axle lift system.

Dodge launched the Viper GTS coupe in 1996, with a double-bubble roof and the 8.0-litre V10, and updated the RT/10 roadster at the same time. The GTS paced the Indianapolis 500 that year.

Racing versions, the GTS-R, won their class at Le Mans and in the FIA GT Championship. Production of this generation ended in 2002.

Most UK cars are imports. Confirm the model year and measure the rear fork before ordering.

Start with your Viper second generation 1996-2002.

Match the model year, drivetrain and body style before comparing brands.

Red Dodge Viper GTS coupe on silver wheels on a country lane

GTS coupe and RT/10

BC lists BCR-Z-03 and BCR-Z-07 for 1996-2008 Vipers. The difference is the rear fork size, 97.5 mm or 85.5 mm, so have it measured before ordering.

Check my Viper
Black Dodge Viper GTS in a circuit paddock

Track and events

Nitron lists R1 and R3 kits for the Gen 2 Viper. R3 has separate rebound, low-speed and high-speed compression controls. Tell the supplier about the tyres and events.

Check my track Viper
Blue Dodge Viper GTS coupe in a Peak District lay-by

Front axle lift

Nitron's kits come with or without a front axle lift system, which raises the front for ramps and kerbs. Ask the supplier which suits your car.

Ask about a front lift

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · BC Racing Z-03, subject to an application check

BC lists BCR-Z-03 for a 97.5 mm rear fork. Measure the fork before ordering.

Read the buying advice

BCR-Z-03 is a possible starting point once the supplier has confirmed the fork size and fitment. It has 30-way rebound adjustment and height set separately from spring preload. Keep the drop modest and include alignment.

  • Measure the rear fork
  • Keep the drop modest
  • Include alignment
View current configurations
Selected configurationSee optionsinc. VAT · BC Racing Z-07, subject to an application check

BC lists BCR-Z-07 for an 85.5 mm rear fork.

Read the buying advice

BCR-Z-07 has the same rates as BCR-Z-03 but suits the smaller rear fork. Order it only once the fork has been measured.

  • Measure the rear fork
  • Confirm the model year
  • Include alignment
View current configurations

Nitron lists R1 and R3 kits for the Gen 2 Viper. Agree the specification with Nitron.

Read the buying advice

Agree spring rates, valving and starting settings with Nitron for your tyres and events, decide whether you need the front axle lift, and confirm delivery timing before booking fitting.

  • Confirm the Gen 2 application
  • Agree rates and valving
  • Confirm delivery timing
Discuss a Nitron kit for my Viper

Know how the suspension is laid out

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Dodge Viper, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The Viper uses double wishbones at each corner with a coil-over damper, so a coilover kit replaces like with like. BC's two kits differ in the size of the rear lower fork.

Check the alignment at the final ride height.

Read about ride height and spring preload
Silver Dodge Viper GTS standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Measure the rear fork

Have the rear lower fork measured to confirm whether the car needs the 97.5 mm or 85.5 mm BC kit, and check the model year.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Viper second generation 1996-2002 range.

Compare the controls and hardware included in each range.

BC Racing

BCR-Z-03 is listed for 1996-2008 Vipers with a 97.5 mm rear fork and BCR-Z-07 for an 85.5 mm fork. Both have 30-way rebound adjustment and default rates of 10 kg/mm front and 12 kg/mm rear.

View BC Racing Viper second generation 1996-2002 kits

Nitron

Nitron lists R1 and R3 kits for the Gen 2 Viper, each with or without a front axle lift system. R1 has a combined damping adjuster; R3 has separate rebound, low-speed and high-speed compression controls. They are supplied to order.

View Nitron Viper second generation 1996-2002 kits

Find your Viper second generation 1996-2002 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

6 listings

Selected application: All Viper second generation 1996-2002 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All Viper second generation 1996-2002 kit links and part numbers

Before you order.

  1. Identify your car

    Send the VIN, model year and the measured rear fork size.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Dodge Viper second generation 1996-2002 coilovers.

Check the details before choosing your kit.

Which BC kit fits my Viper?

BCR-Z-03 for a 97.5 mm rear fork and BCR-Z-07 for an 85.5 mm fork. Have the fork measured.

What is the front axle lift?

A system that raises the front of the car for ramps and kerbs. Nitron offers kits with or without it.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Viper. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Viper's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.