Red 2013-2017 Viper coupe on dark wheels in a Scottish Highland lay-by

Dodge Viper SRT-10 and fifth generation 2003-2017.
The coilover guide.

Shop the coilovers

The 2003-2010 SRT-10 and the 2013-2017 Viper have different kits. Confirm the generation, body and rear fork size, then choose a road or motorsport kit.

Which Viper SRT-10 and fifth generation 2003-2017 do you have?10 listed kits · 3 brandsReviewed 21 November 2026

Dodge Viper SRT-10 and fifth-generation history

The Viper SRT-10, chassis ZB, ran from 2003 to 2010, and the fifth-generation car, chassis VX, from 2013 to 2017. BC lists BCR-Z-03 and BCR-Z-07 for 1996-2008 cars by rear fork size, and BCR-Z-09 for the 2013-2017 car, all at 10 kg/mm front and 12 kg/mm rear.

MOTON lists two- and three-way motorsport kits for the ZB and a three-way kit for the VX coupe, and Nitron lists R1 and R3 kits for Gen 3 to 5.

Dodge launched the Viper SRT-10 roadster in 2003 with an 8.3-litre V10, adding a coupe in 2006. The 2008 update, often called ZB II, brought an 8.4-litre engine.

After a break, the fifth-generation Viper arrived in 2013, first badged SRT and later Dodge again, with an ACR track version from 2016. Production ended in 2017.

Most UK cars are imports. Confirm the generation and body from the VIN before ordering.

Start with your Viper SRT-10 and fifth generation 2003-2017.

Match the model year, drivetrain and body style before comparing brands.

Black Dodge Viper SRT-10 roadster on silver wheels on a country lane

2003-2010 SRT-10

BC lists BCR-Z-03 and BCR-Z-07 for 1996-2008 Vipers by rear fork size, 97.5 mm or 85.5 mm. MOTON lists M 501 052S and M 501 075S for the SRT-10 ZB I and ZB II. Ask about 2009-2010 cars.

Check my SRT-10
White Viper ACR-style coupe in a circuit paddock

2013-2017 Viper and ACR

BC lists BCR-Z-09 for the 2013-2017 Viper under VX, and MOTON lists M 501 076S for the VX coupe. Tell the supplier if the car is an ACR.

Check my VX Viper
Red Viper coupe in a Scottish Highland lay-by

Nitron kits

Nitron lists R1 and R3 kits for Gen 3 to 5, each with or without a front axle lift system. Confirm the generation with Nitron.

Check a Nitron kit

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · BC Racing Z-03, subject to an application check

BC lists BCR-Z-03 for SRT-10s with a 97.5 mm rear fork. Measure the fork first.

Read the buying advice

BCR-Z-03 is a possible starting point once the supplier has confirmed the fork size and fitment. BCR-Z-07 suits an 85.5 mm fork. Both have 30-way rebound adjustment. Keep the drop modest and include alignment.

  • Measure the rear fork
  • Keep the drop modest
  • Include alignment
View current configurations
Selected configurationSee optionsinc. VAT · BC Racing Z-09, subject to an application check

BC lists BCR-Z-09 for the fifth-generation Viper.

Read the buying advice

BCR-Z-09 has its own fitting for the VX car. Confirm the model year and version, keep the drop modest and include alignment.

  • Confirm the VX chassis
  • Keep the drop modest
  • Include alignment
View current configurations

MOTON and Nitron list multi-way kits. Agree the specification before ordering.

Read the buying advice

MOTON's kits have remote reservoirs and separate damping controls; Nitron's R3 has separate rebound and compression controls. Agree rates, valving and settings for your tyres and events, and confirm delivery timing, as these kits are built to order.

  • Confirm the generation
  • Agree rates and valving
  • Confirm delivery timing
Discuss a motorsport kit for my Viper

Know how the suspension is laid out

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Dodge Viper, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The Viper uses double wishbones at each corner with a coil-over damper, so a coilover kit replaces like with like. BC's 1996-2008 kits differ in the size of the rear lower fork.

Check the alignment at the final ride height.

Read about ride height and spring preload
Blue Dodge Viper SRT-10 coupe standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the generation and fork size

Check the VIN to confirm whether the car is a ZB SRT-10 or a VX, and have the rear fork measured on 2003-2008 cars.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Viper SRT-10 and fifth generation 2003-2017 range.

Compare the controls and hardware included in each range.

BC Racing

BCR-Z-03 is listed for 1996-2008 Vipers with a 97.5 mm rear fork, BCR-Z-07 for an 85.5 mm fork and BCR-Z-09 for the 2013-2017 Viper under VX. All have 30-way rebound adjustment and default rates of 10 kg/mm front and 12 kg/mm rear.

View BC Racing Viper SRT-10 and fifth generation 2003-2017 kits

MOTON

M 501 052S is a two-way and M 501 075S a three-way motorsport kit listed for the SRT-10 coupe and convertible, ZB I and ZB II. M 501 076S is a three-way kit for the VX coupe. All use remote reservoirs.

View MOTON Viper SRT-10 and fifth generation 2003-2017 kits

Nitron

Nitron lists R1 and R3 kits for the Gen 3-5 Viper, each with or without a front axle lift system. R1 has a combined damping adjuster; R3 has separate rebound, low-speed and high-speed compression controls.

View Nitron Viper SRT-10 and fifth generation 2003-2017 kits

Find your Viper SRT-10 and fifth generation 2003-2017 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

10 listings

Selected application: All Viper SRT-10 and fifth generation 2003-2017 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

6 of 10 shown
All Viper SRT-10 and fifth generation 2003-2017 kit links and part numbers

Before you order.

  1. Identify your car

    Send the VIN, model year, body style and, for 2003-2008 cars, the measured rear fork size.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Dodge Viper SRT-10 and fifth generation 2003-2017 coilovers.

Check the details before choosing your kit.

Which BC kit fits an SRT-10?

For 2003-2008 cars, BCR-Z-03 for a 97.5 mm rear fork or BCR-Z-07 for an 85.5 mm fork. Ask BC about 2009-2010 cars.

Does the MOTON VX kit fit the roadster?

MOTON lists M 501 076S for the VX coupe. Ask MOTON before ordering for another body.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Viper. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Viper's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.