Silver and carbon Donkervoort D8 GTO on dark wheels in a Scottish Highland lay-by

Donkervoort D8 GTO.
The coilover guide.

Shop the coilovers

AST lists two- and three-way motorsport kits for the D8 GTO. Confirm the version and how the car is used, then agree settings with the supplier.

Which D8 GTO do you have?2 listed kits · 1 brandReviewed 21 November 2026

Donkervoort D8 GTO history

The Donkervoort D8 GTO is a lightweight Dutch sports car with a carbon-fibre body and an Audi five-cylinder turbo engine. AST lists the 5200 two-way kit RIV-D1001S and the 5300 three-way kit RAC-D1001S for it.

Both use remote reservoirs and are made to order.

Donkervoort builds small numbers of lightweight sports cars in the Netherlands. The D8 GTO, launched in 2013, used a 2.5-litre Audi five-cylinder turbo engine and a carbon-fibre body.

Several versions followed, including the GTO Bilster Berg Edition, GTO-RS and GTO-JD70, with different power and equipment.

Many are used on track, so the suspension setup matters as much as the ride height.

Start with your D8 GTO.

Confirm the chassis, year and existing suspension before choosing your setup.

Yellow Donkervoort D8 GTO on black wheels on a country lane

Road and track D8 GTO

AST lists RIV-D1001S and RAC-D1001S for the D8 GTO. Give the supplier the chassis number and version so it can confirm the kit.

Check my D8 GTO
White Donkervoort D8 GTO in a circuit paddock

Track days

The three-way kit adds separate high- and low-speed compression for circuit use. Tell the supplier your tyres and events.

Check my track D8 GTO
Silver and carbon Donkervoort D8 GTO in a Highland lay-by

Later versions

Tell the supplier if the car is a GTO-RS, GTO-JD70 or another later version, so AST can confirm the application.

Check my GTO version

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · AST RIV-D1001S, subject to an exact-car check

AST lists RIV-D1001S, a 5200 two-way kit, for the D8 GTO.

Read the buying advice

RIV-D1001S has independent rebound and compression adjustment, with remote reservoirs. It is made to order, so confirm fitment and lead time before booking fitting.

  • Confirm the version
  • Confirm lead time
  • Include alignment
View current configurations
Selected configurationSee optionsinc. VAT · AST RAC-D1001S, subject to an exact-car check

AST's RAC-D1001S 5300 kit adds separate high- and low-speed compression.

Read the buying advice

The three-way kit gives more control for circuit use. Agree starting settings with the supplier for your tyres and events.

  • Confirm the version
  • Agree settings
  • Confirm lead time
View current configurations

Have a specialist set ride height, corner weights and alignment after fitting.

Read the buying advice

A light car is sensitive to small changes. Agree ride height and damper settings, then have the corner weights and alignment set by a specialist.

  • Set corner weights
  • Set alignment
  • Record settings
Discuss setting up my D8 GTO

Know how the suspension is laid out

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Donkervoort D8 GTO, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The D8 GTO uses double wishbones at each corner with a coil-over damper, so a coilover kit replaces like with like.

Check corner weights and alignment at the final ride height.

Read about ride height and spring preload
Orange Donkervoort D8 GTO standing on its wheels beside an empty two-post lift in a motorsport workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the version

Check the chassis number and version, and note any earlier suspension changes, before ordering.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current D8 GTO range.

Compare the controls and hardware included in each range.

AST

RIV-D1001S is an AST 5200 two-way kit with independent rebound and compression adjustment, and RAC-D1001S a 5300 three-way kit adding separate high- and low-speed compression, both listed for the Donkervoort D8 GTO. Both use remote reservoirs and are made to order, with an approximate four-week lead time.

View AST D8 GTO kits

Find your D8 GTO coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

2 listings

Selected application: All D8 GTO applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All D8 GTO kit links and part numbers

Before you order.

  1. Identify your car

    Send the chassis number, version and how the car is used.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Donkervoort D8 GTO coilovers.

Check the details before choosing your kit.

Which AST kit should I choose?

The 5200 two-way kit for road and track days, or the 5300 three-way kit for more circuit adjustment. Ask the supplier which suits your car.

Is it made to order?

Yes. AST builds these kits to order, with an approximate four-week lead time.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every D8 GTO. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the D8 GTO's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.