Red Ferrari 308 GTS on five-spoke wheels in a Cotswolds lay-by

Ferrari 308 and 328.
The coilover guide.

Shop the coilovers

These are valuable classics. MOTON lists kits for the 328 and Nitron for the 308; confirm the model and keep the original parts.

Which 308 and 328 do you have?4 listed kits · 2 brandsReviewed 21 November 2026

Ferrari 308 and 328 history

The Ferrari 308 GTB and GTS ran from 1975 to 1985, and the 328 that replaced them from 1985 to 1989. MOTON lists M 508 010S and M 508 109S for the 328 GTB and GTS, and Nitron lists R1 and R3 kits for the 308.

All are made to order. Confirm which model and year you have before ordering.

Ferrari launched the 308 GTB in 1975 with a transverse mid-mounted V8, adding the targa-topped GTS in 1977. Fuel injection and later four-valve heads followed.

The 328 replaced it in 1985 with a 3.2-litre engine and updated styling, and was built until 1989.

Both are collectable, so many owners keep the factory suspension parts.

Start with your 308 and 328.

Match the model year, drivetrain and body style before comparing brands.

Silver Ferrari 328 GTB on five-spoke wheels on a country lane

328 GTB and GTS

MOTON lists M 508 010S and M 508 109S for the 328 GTB and GTS. Give the supplier the chassis number and year.

Check my 328
Black Ferrari 308 GTB outside a brick classic-car workshop

308 GTB and GTS

Nitron lists R1 and R3 kits for the 308. Confirm the year and specification with Nitron.

Check my 308
Red Ferrari 308 GTS in a Cotswolds lay-by

Classic condition

Have the chassis, mounts and bushes inspected before fitting, and keep the original parts.

Ask about my classic

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · MOTON M 508 010S, subject to an exact-car check

MOTON lists M 508 010S, a two-way kit, for the 328. Confirm the car first.

Read the buying advice

M 508 010S has 15-position rebound and separate compression adjustment, with remote reservoirs. It is made to order, so confirm fitment and lead time before booking fitting. Keep the height sensible and include alignment.

  • Confirm the model
  • Confirm lead time
  • Include alignment
View current configurations
Selected configurationSee optionsinc. VAT · MOTON M 508 109S, subject to an exact-car check

MOTON's M 508 109S adds separate high- and low-speed compression.

Read the buying advice

The three-way kit gives more control for circuit use. Agree starting settings with the supplier for your tyres and events, and confirm the lead time.

  • Confirm the model
  • Agree settings
  • Confirm lead time
View current configurations

Nitron lists R1 and R3 kits for the 308. Agree the specification with Nitron.

Read the buying advice

R1 has one combined damping adjuster; R3 sets rebound and both compression speeds separately. Agree rates and valving, and confirm delivery timing, as the kits are built to order.

  • Confirm the application
  • Agree rates and valving
  • Confirm delivery timing
Discuss a Nitron kit for my 308

Know how the suspension is laid out

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Ferrari 308, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The 308 uses double wishbones at each corner with a coil-over damper, so a coilover kit replaces like with like.

If the car has electronically controlled factory dampers, ask the supplier how the kit deals with that system. Check the alignment at the final ride height.

Read about ride height and spring preload
Red Ferrari 328 GTS standing on its wheels beside an empty two-post lift in a classic-car workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the model and year

Check the chassis number to confirm whether the car is a 308 or 328 and its year.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current 308 and 328 range.

Compare the controls and hardware included in each range.

MOTON

M 508 010S is a two-way kit with 15-position rebound and separate compression adjustment, and M 508 109S a three-way kit adding separate high- and low-speed compression, both listed for the 328 GTB and GTS. Both use remote reservoirs and are made to order, with an approximate four-week lead time.

View MOTON 308 and 328 kits

Nitron

Nitron lists R1 and R3 kits for the 308. R1 has a combined damping adjuster; R3 has separate rebound, low-speed and high-speed compression controls. They are supplied to order.

View Nitron 308 and 328 kits

Find your 308 and 328 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

4 listings

Selected application: All 308 and 328 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All 308 and 328 kit links and part numbers

Before you order.

  1. Identify your car

    Send the chassis number, model and year.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Ferrari 308 and 328 coilovers.

Check the details before choosing your kit.

Does the MOTON kit fit a 308?

MOTON lists these kits for the 328. Ask before ordering for a 308.

Should I keep the original parts?

Yes. These cars are valued in original condition.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every 308. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the 308's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.