
Ferrari 348.
The coilover guide.
Shop the coiloversMOTON lists two- and three-way kits for the 348, and Nitron an R1 kit. Confirm the body and year, then choose for how the car is used.
Ferrari 348 history
The Ferrari 348 ran from 1989 to 1995 as the tb coupe, ts targa and Spider, with a longitudinal 3.4-litre V8. MOTON lists M 508 116S and M 508 031S for it, and Nitron lists an R1 kit.
All are made to order.
Ferrari launched the 348 in 1989 to replace the 328, mounting the V8 lengthways and adding Testarossa-style side strakes.
The Spider arrived in 1993, and later cars were updated as the GTB and GTS. It was replaced by the F355 in 1994-1995.
Early cars have a reputation for nervous handling at the limit, so setup and alignment matter.
Start with your 348.
Match the model year, drivetrain and body style before comparing brands.

348 tb, ts and Spider
MOTON lists M 508 116S and M 508 031S for the 348 tb, ts, GTS and Spider. Give the supplier the chassis number and body.
Check my 348
Track days
The three-way kit adds separate high- and low-speed compression for circuit use. Nitron also lists an R1 kit.
Check my track 348
Classic condition
Have the mounts and bushes inspected before fitting, and keep the original parts.
Ask about my 348Choose a kit for your car and driving
Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.
MOTON lists M 508 116S, a two-way kit, for the 348. Confirm the car first.
Read the buying advice
M 508 116S has 15-position rebound and separate compression adjustment, with remote reservoirs. It is made to order, so confirm fitment and lead time before booking fitting. Keep the height sensible and include alignment.
- Confirm the model
- Confirm lead time
- Include alignment
MOTON's M 508 031S adds separate high- and low-speed compression.
Read the buying advice
The three-way kit gives more control for circuit use. Agree starting settings with the supplier for your tyres and events, and confirm the lead time.
- Confirm the model
- Agree settings
- Confirm lead time
Nitron lists R1 and R3 kits for the 348. Agree the specification with Nitron.
Read the buying advice
R1 has one combined damping adjuster; R3 sets rebound and both compression speeds separately. Agree rates and valving, and confirm delivery timing, as the kits are built to order.
- Confirm the application
- Agree rates and valving
- Confirm delivery timing
Know how the suspension is laid out
On a standard Ferrari 348, the rear spring and shock absorber are mounted separately.
Layout only. Mounts and spring seats vary by kit.The 348 uses double wishbones at each corner with a coil-over damper, so a coilover kit replaces like with like.
If the car has electronically controlled factory dampers, ask the supplier how the kit deals with that system. Check the alignment at the final ride height.
Read about ride height and spring preload
Plan the fitting before the car arrives
Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.
Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.
Confirm the model and specification
Check the chassis number to confirm the model, body and year, and whether the car has electronically controlled dampers.
Measure the wheel and tyre clearance
Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.
Leave travel for normal use
Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.
Set the geometry after the height
Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.
The current 348 range.
Compare the controls and hardware included in each range.
M 508 116S is a two-way kit with 15-position rebound and separate compression adjustment, and M 508 031S a three-way kit adding separate high- and low-speed compression, both listed for the 348. Both use remote reservoirs and are made to order, with an approximate four-week lead time.
View MOTON 348 kitsNitron lists R1 and R3 kits for the 348. R1 has a combined damping adjuster; R3 has separate rebound, low-speed and high-speed compression controls. They are supplied to order.
View Nitron 348 kitsFind your 348 coilovers.
Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.
3 listings
Selected application: All 348 applications
Match the drivetrain, body style and axle-load limits on the product page before ordering.

Nitron · NTCFE020R1_
Nitron Ferrari 348 R1 Coilover Suspension Kit
Check the exact application

MOTON · M 508 031S
MOTON 3-Way Motorsport Coilovers for Ferrari 348 Applications - M 508 031S
Check the exact application

MOTON · M 508 116S
MOTON 2-Way Motorsport Coilovers for Ferrari 348 Applications - M 508 116S
Check the exact application
Before you order.
Identify your car
Send the chassis number, model, body and year.
Match the kit
Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.
Check what’s included
Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.
Check your modifications
Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.
Plan fitting
Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.
Questions about Ferrari 348 coilovers.
Check the details before choosing your kit.
Which MOTON kit should I choose?
The two-way kit for road and track days, or the three-way kit for serious circuit use.
Does it fit the F355?
No. The F355 has its own kits.
How low should I set the car?
Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every 348. Check the alignment at the final height.
When should I book fitting?
Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.
Let’s talk suspension.
Send the 348's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.




