
Ferrari 360.
The coilover guide.
Shop the coiloversMOTON and Nitron both list kits for the 360. Confirm the version and how the car is used before ordering.
Ferrari 360 history
The 360 ran from 1999 to 2005 as the Modena, Spider and Challenge Stradale, with an aluminium chassis and a 3.6-litre V8. MOTON lists M 508 100S and M 508 001S for it, and Nitron lists R1 and R3 kits.
All are made to order.
Ferrari launched the 360 Modena in 1999 with an aluminium spaceframe built with Alcoa, making it lighter and stiffer than the F355.
The Spider followed in 2000 and the lighter Challenge Stradale in 2003. The F430 replaced it in 2004-2005.
Factory cars have electronically controlled dampers, so ask how each kit deals with that system.
Start with your 360.
Match the model year, drivetrain and body style before comparing brands.

Modena and Spider
MOTON lists M 508 100S and M 508 001S for the 360. Give the supplier the chassis number and version.
Check my 360
Challenge Stradale and track
Tell the supplier if the car is a Challenge Stradale or a converted Challenge car. Nitron also lists R1 and R3 kits.
Check my track 360
Electronic dampers
Ask how the kit deals with the factory damper control and warning light.
Ask about my dampersChoose a kit for your car and driving
Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.
MOTON lists M 508 100S, a two-way kit, for the 360. Confirm the car first.
Read the buying advice
M 508 100S has 15-position rebound and separate compression adjustment, with remote reservoirs. It is made to order, so confirm fitment and lead time before booking fitting. Keep the height sensible and include alignment.
- Confirm the model
- Confirm lead time
- Include alignment
MOTON's M 508 001S adds separate high- and low-speed compression.
Read the buying advice
The three-way kit gives more control for circuit use. Agree starting settings with the supplier for your tyres and events, and confirm the lead time.
- Confirm the model
- Agree settings
- Confirm lead time
Nitron lists R1 and R3 kits for the 360. Agree the specification with Nitron.
Read the buying advice
R1 has one combined damping adjuster; R3 sets rebound and both compression speeds separately. Agree rates and valving, and confirm delivery timing, as the kits are built to order.
- Confirm the application
- Agree rates and valving
- Confirm delivery timing
Know how the suspension is laid out
On a standard Ferrari 360, the rear spring and shock absorber are mounted separately.
Layout only. Mounts and spring seats vary by kit.The 360 uses double wishbones at each corner with a coil-over damper, so a coilover kit replaces like with like.
If the car has electronically controlled factory dampers, ask the supplier how the kit deals with that system. Check the alignment at the final ride height.
Read about ride height and spring preload
Plan the fitting before the car arrives
Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.
Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.
Confirm the model and specification
Check the chassis number to confirm the model, body and year, and whether the car has electronically controlled dampers.
Measure the wheel and tyre clearance
Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.
Leave travel for normal use
Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.
Set the geometry after the height
Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.
The current 360 range.
Compare the controls and hardware included in each range.
M 508 100S is a two-way kit with 15-position rebound and separate compression adjustment, and M 508 001S a three-way kit adding separate high- and low-speed compression, both listed for the 360. Both use remote reservoirs and are made to order, with an approximate four-week lead time.
View MOTON 360 kitsNitron lists R1 and R3 kits for the 360. R1 has a combined damping adjuster; R3 has separate rebound, low-speed and high-speed compression controls. They are supplied to order.
View Nitron 360 kitsFind your 360 coilovers.
Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.
4 listings
Selected application: All 360 applications
Match the drivetrain, body style and axle-load limits on the product page before ordering.

MOTON · M 508 001S
MOTON 3-Way Motorsport Coilovers for Ferrari 360 360 - M 508 001S
Check the exact application

Nitron · NTCFE011R3_
Nitron Ferrari 360 R3 Coilover Suspension Kit
Check the exact application

MOTON · M 508 100S
MOTON 2-Way Motorsport Coilovers for Ferrari 360 360 - M 508 100S
Check the exact application

Nitron · NTCFE011R1_
Nitron Ferrari 360 R1 Coilover Suspension Kit
Check the exact application
All 360 kit links and part numbers
- MOTON · M 508 001S: MOTON 3-Way Motorsport Coilovers for Ferrari 360 360 - M 508 001S
- MOTON · M 508 100S: MOTON 2-Way Motorsport Coilovers for Ferrari 360 360 - M 508 100S
- Nitron · NTCFE011R3_: Nitron Ferrari 360 R3 Coilover Suspension Kit
- Nitron · NTCFE011R1_: Nitron Ferrari 360 R1 Coilover Suspension Kit
Before you order.
Identify your car
Send the chassis number, model, body and year.
Match the kit
Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.
Check what’s included
Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.
Check your modifications
Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.
Plan fitting
Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.
Questions about Ferrari 360 coilovers.
Check the details before choosing your kit.
Which kit should I choose?
MOTON two-way or Nitron R1 for road and track days; MOTON three-way or Nitron R3 for serious circuit use.
Does it fit the F430?
No. The F430 has its own kits.
How low should I set the car?
Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every 360. Check the alignment at the final height.
When should I book fitting?
Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.
Let’s talk suspension.
Send the 360's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.




