Red Ferrari 458 Italia on dark wheels in a Peak District lay-by

Ferrari 458 Italia.
The coilover guide.

Shop the coilovers

BC Racing lists a kit for the 458 Italia and Nitron lists R1 and R3 kits. Confirm the version and how the car's electronic dampers will be handled.

Which 458 Italia do you have?5 listed kits · 2 brandsReviewed 21 November 2026

Ferrari 458 history

The 458 ran from 2009 to 2015 as the Italia, Spider and lighter Speciale, with a 4.5-litre naturally aspirated V8. BC lists BCR-ZZ-01 for the 458 Italia, with default rates of 7 kg/mm front and 10 kg/mm rear.

Nitron lists R1 and R3 kits, each with or without a front axle lift.

Ferrari launched the 458 Italia in 2009 to replace the F430, with a 4.5-litre direct-injection V8 and a seven-speed dual-clutch gearbox.

The Spider followed in 2011 with a folding hard top, and the Speciale in 2013. The turbocharged 488 replaced it in 2015.

Factory cars use magnetorheological dampers, so ask how each kit deals with that system.

Start with your 458 Italia.

Match the model year, drivetrain and body style before comparing brands.

White Ferrari 458 Italia on silver wheels on a country lane

458 Italia

BC lists BCR-ZZ-01 for the 2009-2015 458 Italia, at 7 kg/mm front and 10 kg/mm rear. Give the supplier the chassis number and version.

Check my 458
Yellow Ferrari 458 Speciale in a circuit paddock

Speciale and track use

Nitron lists R1 and R3 kits for the 458. Tell the supplier if the car is a Speciale and describe the tyres and events.

Check my track 458
Red Ferrari 458 Italia in a Peak District lay-by

Spider and front lift

Ask the supplier to confirm the Spider, and whether you need a front axle lift for ramps and kerbs.

Check my 458 Spider

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · BC Racing ZZ-01, subject to an application check

BC lists BCR-ZZ-01 for the 458 Italia. Confirm the car and damper system first.

Read the buying advice

BCR-ZZ-01 is a possible starting point once the supplier has confirmed fitment. It has 30-way rebound adjustment and height set separately from spring preload. Keep the drop modest and include alignment.

  • Confirm the version
  • Ask about the damper system
  • Include alignment
View current configurations

Nitron's R1 kits have one combined damping adjuster, with or without a front lift.

Read the buying advice

Agree rates and settings with Nitron, decide on the front axle lift, and confirm delivery timing before booking fitting.

  • Confirm the version
  • Decide on a front lift
  • Confirm delivery timing
Discuss a Nitron R1 for my 458

Nitron's R3 sets rebound and both compression speeds separately.

Read the buying advice

Agree rates, valving and starting settings with Nitron for your tyres and events, and confirm delivery timing.

  • Confirm the version
  • Agree rates and valving
  • Confirm delivery timing
Discuss a Nitron R3 for my 458

Know how the suspension is laid out

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Ferrari 458, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The 458 uses double wishbones at each corner with a coil-over damper, so a coilover kit replaces like with like.

If the car has electronically controlled factory dampers, ask the supplier how the kit deals with that system. Check the alignment at the final ride height.

Read about ride height and spring preload
Grey Ferrari 458 Spider standing on its wheels beside an empty two-post lift in a motorsport workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the version and dampers

Check the chassis number to confirm the version, and ask how the kit deals with the factory magnetorheological dampers.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current 458 Italia range.

Compare the controls and hardware included in each range.

BC Racing

BCR-ZZ-01 is listed for the 2009-2015 Ferrari 458 Italia, with 30-way rebound adjustment and default rates of 7 kg/mm front and 10 kg/mm rear.

View BC Racing 458 Italia kits

Nitron

Nitron lists R1 and R3 kits for the 458, with or without a front axle lift system. R1 has a combined damping adjuster; R3 has separate rebound, low-speed and high-speed compression controls. They are supplied to order.

View Nitron 458 Italia kits

Find your 458 Italia coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

5 listings

Selected application: All 458 Italia applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All 458 Italia kit links and part numbers

Before you order.

  1. Identify your car

    Send the chassis number, version and how the car is used.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Ferrari 458 Italia coilovers.

Check the details before choosing your kit.

Does the BC kit fit the Spider or Speciale?

BC lists it for the 458 Italia. Ask before ordering for a Spider or Speciale.

What about the factory dampers?

Ask the supplier how the kit deals with the magnetorheological damper control and warning lights.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every 458. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the 458's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.