Red Ferrari 488 GTB on dark wheels in a Cotswolds lay-by

Ferrari 488.
The coilover guide.

Shop the coilovers

Nitron lists R1 and R3 kits for the 488. Confirm the version and how the factory dampers will be handled, then agree the specification with Nitron.

Which 488 do you have?4 listed kits · 1 brandReviewed 21 November 2026

Ferrari 488 history

The 488 ran from 2015 to 2019 as the GTB, Spider and Pista, with a 3.9-litre twin-turbo V8. Nitron lists R1 and R3 kits for it, each with or without a front axle lift system.

They are built to order, so the specification is agreed with Nitron.

Ferrari launched the 488 GTB in 2015, bringing turbocharging back to its mid-engined V8 range. The Spider followed the same year.

The lighter, more powerful 488 Pista arrived in 2018, and the F8 Tributo replaced the range in 2019.

Factory cars use magnetorheological dampers, so ask how the kit deals with that system.

Start with your 488.

Confirm the chassis, year and existing suspension before choosing your setup.

Blue Ferrari 488 Spider on silver wheels on a country lane

488 GTB and Spider

Nitron lists R1 and R3 kits for the 488. Give the supplier the chassis number and version.

Check my 488
White Ferrari 488 Pista in a circuit paddock

Pista and track use

Tell the supplier if the car is a Pista and describe the tyres and events.

Check my track 488
Red Ferrari 488 GTB in a Cotswolds lay-by

Front axle lift

Each Nitron kit is offered with or without a front axle lift for ramps and kerbs. Ask which suits your car.

Ask about a front lift

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Nitron's R1 has one combined damping adjuster.

Read the buying advice

Agree rates and height with Nitron for the car's use, keep the drop sensible, and include alignment.

  • Confirm the version
  • Agree rates
  • Include alignment
Discuss a Nitron R1 for my 488

Nitron's R3 sets rebound and both compression speeds separately.

Read the buying advice

Agree rates, valving and starting settings with Nitron for your tyres and events, and confirm delivery timing.

  • Confirm the version
  • Agree rates and valving
  • Confirm delivery timing
Discuss a Nitron R3 for my 488

A front lift raises the nose for ramps, kerbs and driveways.

Read the buying advice

Decide whether you need the front axle lift before ordering, as Nitron lists kits with and without it.

  • Check your driveways
  • Choose with or without
  • Confirm delivery timing
Discuss a front lift for my 488

Know how the suspension is laid out

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Ferrari 488, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The 488 uses double wishbones at each corner with a coil-over damper, so a coilover kit replaces like with like.

If the car has electronically controlled factory dampers, ask the supplier how the kit deals with that system. Check the alignment at the final ride height.

Read about ride height and spring preload
Black Ferrari 488 GTB standing on its wheels beside an empty two-post lift in a motorsport workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the version and dampers

Check the chassis number to confirm the version, and ask how the kit deals with the factory dampers.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current 488 range.

Compare the controls and hardware included in each range.

Nitron

Nitron lists R1 and R3 kits for the 488, with or without a front axle lift system. R1 has a combined damping adjuster; R3 has separate rebound, low-speed and high-speed compression controls. They are supplied to order.

View Nitron 488 kits

Find your 488 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

4 listings

Selected application: All 488 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All 488 kit links and part numbers

Before you order.

  1. Identify your car

    Send the chassis number, version and how the car is used.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Ferrari 488 coilovers.

Check the details before choosing your kit.

Is there a BC Racing kit for the 488?

Not in this catalogue. Nitron's kits are the listed options.

What is the front axle lift?

A system that raises the front for ramps and kerbs. Nitron offers kits with or without it.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every 488. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the 488's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.