
Ferrari 550 Maranello and 575M.
The coilover guide.
Shop the coiloversMOTON lists two- and three-way kits for the 550 and 575M. Confirm the model and how the car is used before ordering.
Ferrari 550 and 575M history
The 550 Maranello ran from 1996 to 2002 and the 575M from 2002 to 2006, both front-engined V12 grand tourers. MOTON lists M 508 110S and M 508 041S for both.
Both kits are made to order.
Ferrari launched the 550 Maranello in 1996, returning to a front-engined V12 layout for its top two-seater. The open 550 Barchetta followed in 2000.
The 575M Maranello replaced it in 2002 with a 5.7-litre engine and optional F1 gearbox. The 599 GTB took over in 2006.
These are valuable grand tourers, so keep the original parts.
Start with your 550 Maranello and 575M.
Confirm the chassis, year and existing suspension before choosing your setup.

550 and 575M Maranello
MOTON lists M 508 110S and M 508 041S for the 550 Maranello and 575M Maranello. Give the supplier the chassis number and model.
Check my Maranello
Track days and events
The three-way kit adds separate high- and low-speed compression for circuit use. Tell the supplier your tyres and events.
Check my track Maranello
Barchetta and Superamerica
Ask the supplier before ordering for a 550 Barchetta or Superamerica.
Check my open carChoose a kit for your car and driving
Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.
MOTON lists M 508 110S, a two-way kit, for the 550 and 575M. Confirm the car first.
Read the buying advice
M 508 110S has 15-position rebound and separate compression adjustment, with remote reservoirs. It is made to order, so confirm fitment and lead time before booking fitting. Keep the height sensible and include alignment.
- Confirm the model
- Confirm lead time
- Include alignment
MOTON's M 508 041S adds separate high- and low-speed compression.
Read the buying advice
The three-way kit gives more control for circuit use. Agree starting settings with the supplier for your tyres and events, and confirm the lead time.
- Confirm the model
- Agree settings
- Confirm lead time
Have the mounts and bushes checked first, and keep the original parts.
Read the buying advice
Ask a specialist to inspect the suspension mounts, bushes and ball joints. Fix any problems first, keep the original parts, and set the alignment last.
- Inspect the mounts
- Keep original parts
- Set alignment last
Know how the suspension is laid out
On a standard Ferrari 550, the rear spring and shock absorber are mounted separately.
Layout only. Mounts and spring seats vary by kit.The 550 uses double wishbones at each corner with a coil-over damper, so a coilover kit replaces like with like.
If the car has electronically controlled factory dampers, ask the supplier how the kit deals with that system. Check the alignment at the final ride height.
Read about ride height and spring preload
Plan the fitting before the car arrives
Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.
Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.
Confirm the model and specification
Check the chassis number to confirm the model, body and year, and whether the car has electronically controlled dampers.
Measure the wheel and tyre clearance
Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.
Leave travel for normal use
Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.
Set the geometry after the height
Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.
The current 550 Maranello and 575M range.
Compare the controls and hardware included in each range.
M 508 110S is a two-way kit with 15-position rebound and separate compression adjustment, and M 508 041S a three-way kit adding separate high- and low-speed compression, both listed for the 550 and 575M. Both use remote reservoirs and are made to order, with an approximate four-week lead time.
View MOTON 550 Maranello and 575M kitsFind your 550 Maranello and 575M coilovers.
Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.
2 listings
Selected application: All 550 Maranello and 575M applications
Match the drivetrain, body style and axle-load limits on the product page before ordering.

MOTON · M 508 041S
MOTON 3-Way Motorsport Coilovers for Ferrari 550 / 575 - M 508 041S
Check the exact application

MOTON · M 508 110S
MOTON 2-Way Motorsport Coilovers for Ferrari 550 / 575 - M 508 110S
Check the exact application
All 550 Maranello and 575M kit links and part numbers
Before you order.
Identify your car
Send the chassis number, model, body and year.
Match the kit
Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.
Check what’s included
Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.
Check your modifications
Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.
Plan fitting
Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.
Questions about Ferrari 550 Maranello and 575M coilovers.
Check the details before choosing your kit.
Does it fit both models?
MOTON lists both kits for the 550 Maranello and 575M Maranello.
Should I keep the original parts?
Yes. Keep the factory dampers and springs.
How low should I set the car?
Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every 550. Check the alignment at the final height.
When should I book fitting?
Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.
Let’s talk suspension.
Send the 550's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.



