
Ferrari Dino 246.
The coilover guide.
Shop the coiloversNitron lists R1 and R3 kits for the Dino 246. It is a valuable classic, so have it inspected first and keep the original parts.
Dino 246 history
The Dino 246 GT and GTS were built from 1969 to 1974 with a mid-mounted 2.4-litre V6. Nitron lists R1 and R3 kits for the Dino 246.
They are built to order, so the specification is agreed with Nitron.
Ferrari sold the Dino as a separate brand, named after Enzo Ferrari's son Alfredo. The 206 GT came first, followed in 1969 by the larger-engined 246 GT.
The targa-topped 246 GTS arrived in 1972, and production ended in 1974.
Original cars are highly valued, so any modification should be reversible.
Start with your Dino 246.
Confirm the chassis, year and existing suspension before choosing your setup.

Dino 246 GT and GTS
Nitron lists R1 and R3 kits for the Dino 246. Give the supplier the chassis number and body.
Check my Dino
Historic events
For historic racing or hill climbs, check the event's rules on suspension changes before ordering.
Check my event Dino
Choose a kit for your car and driving
Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.
Nitron's R1 has one combined damping adjuster.
Read the buying advice
Agree rates and height with Nitron, keep the drop modest on a classic, and include alignment.
- Confirm the body
- Keep the drop modest
- Include alignment
Nitron's R3 sets rebound and both compression speeds separately.
Read the buying advice
Agree rates, valving and settings with Nitron, and check your event's rules before fitting.
- Check event rules
- Agree rates and valving
- Confirm delivery timing
Have the chassis, mounts and bushes checked first, and keep the original parts.
Read the buying advice
Ask a specialist to inspect the suspension mounts and bushes. Fix any problems first, keep the original parts, and set the alignment last.
- Inspect the mounts
- Keep original parts
- Set alignment last
Know how the suspension is laid out
On a standard Ferrari Dino, the rear spring and shock absorber are mounted separately.
Layout only. Mounts and spring seats vary by kit.The Dino uses double wishbones at each corner with a coil-over damper, so a coilover kit replaces like with like.
If the car has electronically controlled factory dampers, ask the supplier how the kit deals with that system. Check the alignment at the final ride height.
Read about ride height and spring preload
Plan the fitting before the car arrives
Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.
Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.
Confirm the model and body
Check the chassis number to confirm the car is a 246 GT or GTS.
Measure the wheel and tyre clearance
Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.
Leave travel for normal use
Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.
Set the geometry after the height
Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.
The current Dino 246 range.
Compare the controls and hardware included in each range.
Nitron lists R1 and R3 kits for the Dino 246. R1 has a combined damping adjuster; R3 has separate rebound, low-speed and high-speed compression controls. They are supplied to order.
View Nitron Dino 246 kitsFind your Dino 246 coilovers.
Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.
2 listings
Selected application: All Dino 246 applications
Match the drivetrain, body style and axle-load limits on the product page before ordering.

Nitron · NTCFE016R3_
Nitron Ferrari Dino 246 R3 Coilover Suspension Kit
Check the exact application

Nitron · NTCFE016R1_
Nitron Ferrari Dino 246 R1 Coilover Suspension Kit
Check the exact application
All Dino 246 kit links and part numbers
Before you order.
Identify your car
Send the chassis number, body and year.
Match the kit
Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.
Check what’s included
Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.
Check your modifications
Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.
Plan fitting
Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.
Questions about Ferrari Dino 246 coilovers.
Check the details before choosing your kit.
Does it fit the 206 GT?
Nitron lists the 246. Ask before ordering for a 206 GT.
Is the change reversible?
Keep the original parts so the car can be returned to standard.
How low should I set the car?
Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Dino. Check the alignment at the final height.
When should I book fitting?
Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.
Let’s talk suspension.
Send the Dino's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.



