Red Ferrari F355 Berlinetta on five-spoke wheels in a Lake District lay-by

Ferrari F355.
The coilover guide.

Shop the coilovers

MOTON and Nitron both list kits for the F355. Confirm the body and whether the car has electronic dampers, then choose for how it is used.

Which F355 do you have?6 listed kits · 2 brandsReviewed 21 November 2026

Ferrari F355 history

The F355 ran from 1994 to 1999 as the Berlinetta, GTS and Spider, with a 3.5-litre five-valve V8 and optional F1 paddle-shift gearbox. MOTON lists M 508 090S and M 508 021S, and Nitron lists R1 and R3 kits.

All are made to order.

Ferrari launched the F355 in 1994 to replace the 348, with a five-valve-per-cylinder V8 and revised suspension with electronically adjustable dampers.

The Spider followed in 1995, and the F1 gearbox arrived in 1997. Production ended in 1999 when the 360 Modena took over.

Ask the supplier how each kit deals with the factory electronic damper system.

Start with your F355.

Match the model year, drivetrain and body style before comparing brands.

Yellow Ferrari F355 Spider on five-spoke wheels on a country lane

Berlinetta, GTS and Spider

MOTON lists M 508 090S and M 508 021S for the F355 Berlinetta, GTS, Spider and F1. Give the supplier the chassis number and body.

Check my F355
Silver Ferrari F355 in a circuit paddock

Track days

Nitron lists R1 and R3 kits, with or without a front axle lift. Tell the supplier your tyres and events.

Check my track F355
Red Ferrari F355 Berlinetta in a Lake District lay-by

Electronic dampers

The F355 has electronically adjustable factory dampers. Ask how the kit deals with the warning light and control system.

Ask about my dampers

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · MOTON M 508 090S, subject to an exact-car check

MOTON lists M 508 090S, a two-way kit, for the F355. Confirm the car first.

Read the buying advice

M 508 090S has 15-position rebound and separate compression adjustment, with remote reservoirs. It is made to order, so confirm fitment and lead time before booking fitting. Keep the height sensible and include alignment.

  • Confirm the model
  • Confirm lead time
  • Include alignment
View current configurations
Selected configurationSee optionsinc. VAT · MOTON M 508 021S, subject to an exact-car check

MOTON's M 508 021S adds separate high- and low-speed compression.

Read the buying advice

The three-way kit gives more control for circuit use. Agree starting settings with the supplier for your tyres and events, and confirm the lead time.

  • Confirm the model
  • Agree settings
  • Confirm lead time
View current configurations

Nitron lists R1 and R3 kits for the F355. Agree the specification with Nitron.

Read the buying advice

R1 has one combined damping adjuster; R3 sets rebound and both compression speeds separately. Some kits add a front axle lift for ramps and kerbs. Agree rates and valving, and confirm delivery timing, as the kits are built to order.

  • Confirm the application
  • Agree rates and valving
  • Confirm delivery timing
Discuss a Nitron kit for my F355

Know how the suspension is laid out

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Ferrari F355, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The F355 uses double wishbones at each corner with a coil-over damper, so a coilover kit replaces like with like.

If the car has electronically controlled factory dampers, ask the supplier how the kit deals with that system. Check the alignment at the final ride height.

Read about ride height and spring preload
Red Ferrari F355 GTS standing on its wheels beside an empty two-post lift in a motorsport workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the model and specification

Check the chassis number to confirm the model, body and year, and whether the car has electronically controlled dampers.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current F355 range.

Compare the controls and hardware included in each range.

MOTON

M 508 090S is a two-way kit with 15-position rebound and separate compression adjustment, and M 508 021S a three-way kit adding separate high- and low-speed compression, both listed for the F355. Both use remote reservoirs and are made to order, with an approximate four-week lead time.

View MOTON F355 kits

Nitron

Nitron lists R1 and R3 kits for the F355, with or without a front axle lift system. R1 has a combined damping adjuster; R3 has separate rebound, low-speed and high-speed compression controls. They are supplied to order.

View Nitron F355 kits

Find your F355 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

6 listings

Selected application: All F355 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All F355 kit links and part numbers

Before you order.

  1. Identify your car

    Send the chassis number, model, body and year.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Ferrari F355 coilovers.

Check the details before choosing your kit.

Which kit should I choose?

MOTON two-way or Nitron R1 for road and track days; MOTON three-way or Nitron R3 for serious circuit use.

What about the factory electronic dampers?

Ask the supplier how the kit deals with the factory system and warning light.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every F355. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the F355's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.