Red Ferrari F430 coupe on five-spoke wheels in a Scottish Highland lay-by

Ferrari F430.
The coilover guide.

Shop the coilovers

Nitron lists separate kits for road cars and the F430 Challenge race car. Confirm which you have, then choose for how the car is used.

Which F430 do you have?10 listed kits · 2 brandsReviewed 21 November 2026

Ferrari F430 history

The F430 ran from 2004 to 2009 as a coupe and Spider, with a 4.3-litre V8, the E-Diff and the Manettino switch, plus the Challenge race car and 430 Scuderia. MOTON lists M 508 113S and M 508 112S for it.

Nitron lists R1 and R3 kits for road cars and separate kits for the Challenge, each with or without a front axle lift.

Ferrari launched the F430 in 2004 to replace the 360, with a new 4.3-litre V8, an electronic differential and the steering-wheel Manettino.

The Spider followed in 2005, the F430 Challenge race car in 2006 and the lighter 430 Scuderia in 2007. The 458 Italia replaced it in 2009.

Road cars have electronically controlled dampers, so ask how each kit deals with that system.

Start with your F430.

Match the model year, drivetrain and body style before comparing brands.

Black Ferrari F430 Spider on silver wheels on a country lane

Coupe and Spider

MOTON lists M 508 113S and M 508 112S for the F430, and Nitron lists non-Challenge R1 and R3 kits. Give the supplier the chassis number and body.

Check my F430
Ferrari F430 Challenge race car in a circuit paddock

F430 Challenge

Nitron lists separate R1 and R3 kits for the F430 Challenge race car, with or without a front axle lift.

Check my Challenge car
Red Ferrari F430 coupe in a Scottish Highland lay-by

430 Scuderia and electronic dampers

Tell the supplier if the car is a 430 Scuderia, and ask how the kit deals with the factory damper control.

Ask about my F430

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · MOTON M 508 113S, subject to an exact-car check

MOTON lists M 508 113S, a two-way kit, for the F430. Confirm the car first.

Read the buying advice

M 508 113S has 15-position rebound and separate compression adjustment, with remote reservoirs. It is made to order, so confirm fitment and lead time before booking fitting. Keep the height sensible and include alignment.

  • Confirm the model
  • Confirm lead time
  • Include alignment
View current configurations
Selected configurationSee optionsinc. VAT · MOTON M 508 112S, subject to an exact-car check

MOTON's M 508 112S adds separate high- and low-speed compression.

Read the buying advice

The three-way kit gives more control for circuit use. Agree starting settings with the supplier for your tyres and events, and confirm the lead time.

  • Confirm the model
  • Agree settings
  • Confirm lead time
View current configurations

Nitron lists R1 and R3 kits for the F430. Agree the specification with Nitron.

Read the buying advice

R1 has one combined damping adjuster; R3 sets rebound and both compression speeds separately. Some kits add a front axle lift for ramps and kerbs. Agree rates and valving, and confirm delivery timing, as the kits are built to order.

  • Confirm the application
  • Agree rates and valving
  • Confirm delivery timing
Discuss a Nitron kit for my F430

Know how the suspension is laid out

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Ferrari F430, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The F430 uses double wishbones at each corner with a coil-over damper, so a coilover kit replaces like with like.

If the car has electronically controlled factory dampers, ask the supplier how the kit deals with that system. Check the alignment at the final ride height.

Read about ride height and spring preload
Yellow Ferrari F430 standing on its wheels beside an empty two-post lift in a motorsport workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the model and specification

Check the chassis number to confirm the model, body and year, and whether the car has electronically controlled dampers.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current F430 range.

Compare the controls and hardware included in each range.

MOTON

M 508 113S is a two-way kit with 15-position rebound and separate compression adjustment, and M 508 112S a three-way kit adding separate high- and low-speed compression, both listed for the F430. Both use remote reservoirs and are made to order, with an approximate four-week lead time.

View MOTON F430 kits

Nitron

Nitron lists R1 and R3 kits for the F430, with or without a front axle lift system. R1 has a combined damping adjuster; R3 has separate rebound, low-speed and high-speed compression controls. They are supplied to order.

View Nitron F430 kits

Find your F430 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

10 listings

Selected application: All F430 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

6 of 10 shown
All F430 kit links and part numbers

Before you order.

  1. Identify your car

    Send the chassis number, model, body and year.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Ferrari F430 coilovers.

Check the details before choosing your kit.

Does the road kit fit the Challenge car?

No. Nitron lists separate kits for the F430 Challenge.

Which kit should I choose?

MOTON two-way or Nitron R1 for road and track days; MOTON three-way or Nitron R3 for serious circuit use.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every F430. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the F430's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.