Red Ferrari Testarossa on five-spoke wheels in a Cotswolds lay-by

Ferrari Testarossa and 512 TR.
The coilover guide.

Shop the coilovers

Nitron lists R1 kits for the Testarossa and 512 TR. These are valuable classics, so confirm the model and keep the original parts.

Which Testarossa and 512 TR do you have?3 listed kits · 1 brandReviewed 21 November 2026

Ferrari Testarossa and 512 TR history

The Testarossa ran from 1984 to 1991 and the 512 TR from 1991 to 1994, both with a mid-mounted flat-12. Nitron lists R1 kits for both, with or without a front axle lift, and an elec-TRON R1 with electronically controlled damping for the 512 TR.

They are built to order.

Ferrari launched the Testarossa in 1984 with a 4.9-litre flat-12 and its famous side strakes. Early cars had a single high-mounted mirror.

The 512 TR replaced it in 1991 with more power and revised suspension, followed by the F512 M in 1994.

These cars are valued in original condition, so many owners keep the factory parts.

Start with your Testarossa and 512 TR.

Confirm the chassis, year and existing suspension before choosing your setup.

White Ferrari 512 TR on five-spoke wheels on a country lane

Testarossa and 512 TR

Nitron lists R1 kits for the Testarossa and 512 TR, with or without a front axle lift. Give the supplier the chassis number and model.

Check my Testarossa
Black Ferrari Testarossa outside a brick classic-car workshop

512 TR elec-TRON

Nitron lists an elec-TRON R1 for the 512 TR, with electronically controlled damping. Confirm the control hardware it needs.

Ask about elec-TRON
Red Ferrari Testarossa in a Cotswolds lay-by

F512 M and condition

Ask before ordering for an F512 M. Have the mounts and bushes inspected first.

Check my F512 M

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Nitron's R1 has one combined damping adjuster.

Read the buying advice

Agree rates and height with Nitron, keep the drop modest on a classic, and include alignment.

  • Confirm the model
  • Keep the drop modest
  • Include alignment
Discuss a Nitron R1 for my Testarossa

A front lift raises the nose for ramps, kerbs and driveways.

Read the buying advice

Nitron lists the R1 kit with or without a front axle lift. Decide before ordering.

  • Check your driveways
  • Choose with or without
  • Confirm delivery timing
Discuss a front lift for my Testarossa

Have the chassis, mounts and bushes checked first, and keep the original parts.

Read the buying advice

Ask a specialist to inspect the suspension mounts and bushes. Fix any problems first, keep the original parts, and set the alignment last.

  • Inspect the mounts
  • Keep original parts
  • Set alignment last
Discuss my Testarossa

Know how the suspension is laid out

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Ferrari Testarossa, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The Testarossa uses double wishbones at each corner with a coil-over damper, so a coilover kit replaces like with like.

If the car has electronically controlled factory dampers, ask the supplier how the kit deals with that system. Check the alignment at the final ride height.

Read about ride height and spring preload
Red Ferrari 512 TR standing on its wheels beside an empty two-post lift in a classic-car workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the model

Check the chassis number to confirm whether the car is a Testarossa, 512 TR or F512 M.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Testarossa and 512 TR range.

Compare the controls and hardware included in each range.

Nitron

Nitron lists R1 kits for the Testarossa and 512 TR, with or without a front axle lift system, and an elec-TRON R1 with electronically controlled damping for the 512 TR. R1 has a combined damping adjuster. They are supplied to order.

View Nitron Testarossa and 512 TR kits

Find your Testarossa and 512 TR coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

3 listings

Selected application: All Testarossa and 512 TR applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All Testarossa and 512 TR kit links and part numbers

Before you order.

  1. Identify your car

    Send the chassis number, model and year.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Ferrari Testarossa and 512 TR coilovers.

Check the details before choosing your kit.

Does it fit the F512 M?

Nitron lists the Testarossa and 512 TR. Ask before ordering for an F512 M.

What is elec-TRON?

Nitron's electronically controlled damping. Confirm the control hardware it needs.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Testarossa. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Testarossa's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.