Yellow Fiat Coupe 20V Turbo on five-spoke wheels in a Cotswolds lay-by

Fiat Coupe (FA/175).
The coilover guide.

Shop the coilovers

The Fiat Coupe is now a modern classic. BC Racing lists one kit in two versions; check the car's condition and keep the original parts.

Which Coupe (FA/175) do you have?1 listed kit · 1 brandReviewed 21 November 2026

Fiat Coupe history

The Fiat Coupe, chassis FA/175, was built from 1993 to 2000 with styling by Chris Bangle and Pininfarina. BC lists BCR-ZO-01 for it, as a BR RA version with a pillowball front and an RM MA version with an inverted front damper.

Both have default rates of 6 kg/mm front and rear.

Fiat launched the Coupe in 1993 with four-cylinder engines, including a 2.0 16V turbo. The five-cylinder 20V and 20V Turbo arrived in 1996.

The Limited Edition of 1998 added a six-speed gearbox and other upgrades. Production ended in 2000.

Many cars are now cherished, so check the condition and keep the original parts.

Start with your Coupe (FA/175).

Confirm the chassis, year and existing suspension before choosing your setup.

Red Fiat Coupe on silver wheels on a country lane

Fiat Coupe

BC lists BCR-ZO-01 for the 1993-2000 Coupe, including the turbo cars, at 6 kg/mm front and rear. Give the supplier the VIN and engine.

Check my Coupe
Blue Fiat Coupe outside a brick classic-car workshop

Track days

The RM MA version has an inverted front damper for harder use. Ask BC which version suits your car.

Check my track Coupe
Yellow Fiat Coupe 20V Turbo in a Cotswolds lay-by

20V Turbo and Limited Edition

Tell the supplier the engine and whether the car is a Limited Edition, and mention any previous suspension changes.

Check my 20V Turbo

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · BC Racing ZO-01 BR RA, subject to an application check

BC lists BCR-ZO-01 BR RA for the Coupe. Have the car checked first.

Read the buying advice

BCR-ZO-01 is a possible starting point once the supplier has confirmed fitment. It has 30-way rebound adjustment and height set separately from spring preload. Keep the drop modest on an older car and include alignment.

  • Confirm the engine
  • Keep the drop modest
  • Include alignment
View current configurations
Selected configurationSee optionsinc. VAT · BC Racing ZO-01 RM MA, subject to an application check

BC's RM MA version has an inverted front damper.

Read the buying advice

The inverted front is stiffer in bending, which suits track days. Confirm it suits your car and agree starting settings.

  • Confirm the version
  • Agree settings
  • Include alignment
View current configurations

Have the mounts and bushes checked first, and keep the original parts.

Read the buying advice

Ask a specialist to inspect the suspension mounts, bushes and subframes. Fix any problems first, keep the original parts, and set the alignment last.

  • Inspect the mounts
  • Keep original parts
  • Set alignment last
Discuss my Fiat Coupe

Know how the suspension is laid out

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Fiat Coupe, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The Coupe has MacPherson struts at the front. BC lists default rates of 6 kg/mm front and rear; ask BC what the kit supplies at the rear.

Check the alignment at the final ride height.

Read about ride height and spring preload
Black Fiat Coupe standing on its wheels beside an empty two-post lift in a classic-car workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the engine

Check the VIN and engine code, and note any earlier suspension changes, before ordering.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Coupe (FA/175) range.

See the controls and hardware in the listed kit.

BC Racing

BCR-ZO-01 is listed for the 1993-2000 Fiat Coupe, including turbo cars, as BR RA with a pillowball front and RM MA with an inverted front. Both have 30-way rebound adjustment and default rates of 6 kg/mm front and rear.

View BC Racing Coupe (FA/175) kits

Find your Coupe (FA/175) coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

1 listing

Selected application: All Coupe (FA/175) applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All Coupe (FA/175) kit links and part numbers

Before you order.

  1. Identify your car

    Send the VIN, engine and any previous suspension changes.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Fiat Coupe (FA/175) coilovers.

Check the details before choosing your kit.

Which version should I choose?

BR RA has a pillowball front; RM MA has an inverted front damper for harder use. Ask BC which suits your car.

Does it fit the Barchetta?

No. BCR-ZO-01 is listed for the Coupe.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Coupe. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Coupe's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.