
Fiat Punto 176.
The coilover guide.
Shop the coiloversSPAX lists one RSX kit for the first-generation Punto. Confirm the version and keep the drop sensible.
Fiat Punto 176 history
The first-generation Punto, type 176, was built from 1993 to 1999 in hatchback and Cabriolet forms, including the turbocharged GT and the Sporting. SPAX lists RSX599 for it, with 40-75 mm lowering at the front and 50 mm at the rear.
It has adjustable damping.
Fiat launched the Punto in 1993 to replace the Uno, styled by Giorgetto Giugiaro, and it was European Car of the Year in 1995.
Versions included the 55, 60 and 75, TD and TDS diesels, the 90, the Sporting, the 1.4 GT turbo and a Bertone-built Cabriolet.
It was replaced by the second-generation Punto in 1999.
Start with your Punto 176.
Confirm the chassis, year and existing suspension before choosing your setup.

Punto 55, 60, 75 and diesels
SPAX lists RSX599 for the Punto 55, 60 and 75, including TD and TDS, up to September 1999. Give the supplier the VIN and engine.
Check my Punto
Cabriolet
SPAX lists the same kit for the Punto Cabriolet. Confirm the body with the supplier.
Check my Cabriolet
GT and Sporting
SPAX lists RSX599 for the Punto 90, GT and Sporting. Tell the supplier the version and any previous changes.
Check my Punto GTChoose a kit for your car and driving
Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.
SPAX lists RSX599 for the first-generation Punto.
Read the buying advice
RSX599 has adjustable damping and 40-75 mm lowering at the front, with the rear 50 mm lower. SPAX notes some rear suspensions keep separate springs, so check what the kit supplies.
- Confirm the version
- Check the rear set-up
- Include alignment
If you are changing wheels too, plan both so the tyres clear the arches.
Read the buying advice
Give the fitter the new wheel and tyre sizes before setting the height. Check clearance through full steering lock and suspension travel, and set the alignment last.
- Give wheel and tyre sizes
- Check clearance on lock
- Set alignment last
Have the mounts and bushes checked first.
Read the buying advice
Ask a specialist to inspect the suspension mounts, bushes and rear axle. Fix any problems first, and set the alignment last.
- Inspect the mounts
- Check the bushes
- Set alignment last
Know how the rear works
On a standard Fiat Punto, the rear spring and shock absorber are mounted separately.
Layout only. Mounts and spring seats vary by kit.SPAX lists a fixed 50 mm rear lowering for this kit and notes some rear suspensions keep separate springs or torsion-bar adjustment.
Check the rear alignment readings at the final ride height.
Read about ride height and spring preload
Plan the fitting before the car arrives
Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.
Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.
Confirm the version
Check the VIN to confirm the car is a first-generation Punto built before September 1999, and which version it is.
Measure the wheel and tyre clearance
Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.
Leave travel for normal use
Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.
Set the geometry after the height
Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.
The current Punto 176 range.
See the controls and hardware in the listed kit.
RSX599 is listed for the 1993-1999 Punto 55, 60, 75, TD, TDS, 90, GT, Sporting and Cabriolet, with adjustable damping, 40-75 mm front lowering and 50 mm rear lowering. SPAX notes the figures depend on the original suspension.
View SPAX Punto 176 kitsFind your Punto 176 coilovers.
Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.
1 listing
Selected application: All Punto 176 applications
Match the drivetrain, body style and axle-load limits on the product page before ordering.

SPAX · RSX599
SPAX RSX Coilover Kit for Fiat applications - RSX599
Check the exact application
All Punto 176 kit links and part numbers
Before you order.
Identify your car
Send the VIN, engine and version.
Match the kit
Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.
Check what’s included
Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.
Check your modifications
Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.
Plan fitting
Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.
Questions about Fiat Punto 176 coilovers.
Check the details before choosing your kit.
Does it fit the 1999-on Punto?
No. The second-generation Punto has its own SPAX kits.
How low will it go?
SPAX lists 40-75 mm at the front and 50 mm at the rear, depending on the original suspension.
How low should I set the car?
Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Punto. Check the alignment at the final height.
When should I book fitting?
Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.
Let’s talk suspension.
Send the Punto's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.



