Silver Fiat Punto Sporting on dark wheels on a town street

Fiat Punto 188.
The coilover guide.

Shop the coilovers

SPAX lists two RSX kits for the second-generation Punto, with 20 mm or 50 mm of rear lowering. Choose the drop you want before ordering.

Which Punto 188 do you have?2 listed kits · 1 brandReviewed 21 November 2026

Fiat Punto 188 history

The second-generation Punto, type 188, was built from 1999, with a facelift in 2003. SPAX lists RSX783 and RSX784 for the 1.2, 1.3 JTD and 1.4 16V, both with 30-60 mm front lowering.

RSX783 lowers the rear by 20 mm and RSX784 by 50 mm.

Fiat launched the second Punto in 1999, again styled by Giugiaro, with three- and five-door bodies.

A 2003 facelift brought a new nose and the 1.3 JTD Multijet diesel. The Grande Punto replaced it in 2005, though the older car stayed on sale in some markets as the Punto Classic.

Sporting versions are popular with modifiers.

Start with your Punto 188.

Confirm the chassis, year and existing suspension before choosing your setup.

Red Fiat Punto five-door on silver wheels on a suburban street

Mild rear drop

SPAX lists RSX783 for the 1.2, 1.3 JTD and 1.4 16V, with 30-60 mm front and 20 mm rear lowering. Give the supplier the VIN and engine.

Check my Punto
Black Fiat Punto outside a modern workshop

Lower rear

SPAX lists RSX784 for the same engines with 50 mm rear lowering. Choose it if you want the rear lower.

Check the lower kit
Silver Fiat Punto Sporting on a town street

Sporting and other engines

Tell the supplier the engine and version. Ask before ordering for engines not listed.

Check my Punto Sporting

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · SPAX RSX783, subject to an application check

SPAX lists RSX783 with 20 mm rear lowering.

Read the buying advice

RSX783 has adjustable damping and 30-60 mm front lowering, with the rear 20 mm lower. SPAX notes some rear set-ups keep a separate spring.

  • Confirm the engine
  • Check the rear set-up
  • Include alignment
View current configurations
Selected configurationSee optionsinc. VAT · SPAX RSX784, subject to an application check

SPAX lists RSX784 with 50 mm rear lowering.

Read the buying advice

RSX784 has the same front range with a 50 mm lower rear. Check wheel clearance and keep enough travel for the road.

  • Confirm the engine
  • Check wheel clearance
  • Include alignment
View current configurations

If you are changing wheels too, plan both so the tyres clear the arches.

Read the buying advice

Give the fitter the new wheel and tyre sizes before setting the height. Check clearance through full steering lock and suspension travel, and set the alignment last.

  • Give wheel and tyre sizes
  • Check clearance on lock
  • Set alignment last
Discuss wheels and suspension for my Punto

Know how the rear works

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Fiat Punto, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The Punto has a torsion-beam rear axle. SPAX sets the rear drop by kit choice and notes some rear set-ups keep a separate spring.

A beam axle has little alignment adjustment, so check the rear readings at the final ride height.

Read about ride height and spring preload
Blue Fiat Punto standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the engine

Check the VIN to confirm the car is a 188 Punto and which engine it has.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Punto 188 range.

Compare the controls and hardware included in each range.

SPAX

RSX783 and RSX784 are listed for the 1999-on Punto 1.2, 1.3 JTD and 1.4 16V, with adjustable damping and 30-60 mm front lowering. RSX783 lowers the rear by 20 mm and RSX784 by 50 mm. SPAX notes some rear set-ups keep a separate spring.

View SPAX Punto 188 kits

Find your Punto 188 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

2 listings

Selected application: All Punto 188 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All Punto 188 kit links and part numbers

Before you order.

  1. Identify your car

    Send the VIN, engine and the rear drop you want.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Fiat Punto 188 coilovers.

Check the details before choosing your kit.

What is the difference between the two kits?

RSX783 lowers the rear by 20 mm and RSX784 by 50 mm. The front range is the same.

Does it fit the Grande Punto?

No. The Grande Punto has its own kits.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Punto. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Punto's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.