
Ford Falcon BA/BF 2002-2008.
The coilover guide.
Shop the coiloversBC lists separate kits for the BA/BF saloon and for the wagon and ute. Confirm the body before ordering.
Ford Falcon BA and BF history
The BA and BF Falcon were Ford Australia's large rear-drive cars from 2002 to 2008, with the XR6 Turbo and V8 XR8 as performance versions. BC lists BCR-E-25 for the saloon at 10 kg/mm front and 8 kg/mm rear, and BCR-E-26 for the wagon and ute at 10 kg/mm front.
UK cars are imports.
Ford Australia launched the BA Falcon in 2002, with independent rear suspension on the saloon and the Barra six-cylinder engine.
The BF update followed in 2005. The utes kept a leaf-sprung rear. The FG replaced the range in 2008.
FPV versions were developed by Ford Performance Vehicles.
Start with your Falcon BA/BF 2002-2008.
Confirm the chassis, year and existing suspension before choosing your setup.

Saloon
BC lists BCR-E-25 for the 2002-2007 saloon. Give the supplier the VIN and engine.
Check my Falcon
Wagon and ute
BC lists BCR-E-26 for the wagon and ute at 10 kg/mm front, with no rear rate listed. Ask BC what it supplies at the rear.
Check my Falcon ute
XR6 Turbo, XR8 and FPV
Tell the supplier the version and engine, so the kit and rates can be confirmed.
Check my XR6 TurboChoose a kit for your car and driving
Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.
BC lists BCR-E-25 for the BA/BF saloon.
Read the buying advice
BCR-E-25 is a possible starting point once the supplier has confirmed fitment. It has 30-way rebound adjustment and height set separately from spring preload. Keep the drop modest and include alignment.
- Confirm the saloon
- Keep the drop modest
- Include alignment
BC lists BCR-E-26 for the wagon and ute.
Read the buying advice
BC lists no rear rate for this kit. Ask what it supplies at the rear, and plan the height for the load.
- Confirm the body
- Ask about the rear
- Check when loaded
If you are changing wheels too, plan both so the tyres clear the arches.
Read the buying advice
Give the fitter the new wheel and tyre sizes before setting the height. Check clearance through full steering lock and suspension travel, and set the alignment last.
- Give wheel and tyre sizes
- Check clearance on lock
- Set alignment last
Know how the rear works
On a standard Ford Falcon, the rear spring and shock absorber are mounted separately.
Layout only. Mounts and spring seats vary by kit.Ask the supplier what each kit supplies at the rear of the Falcon, and whether it keeps a separate rear spring.
Check the rear alignment readings at the final ride height.
Read about ride height and spring preload
Plan the fitting before the car arrives
Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.
Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.
Confirm the body
Check the VIN to confirm whether the car is a saloon, wagon or ute, and which engine it has.
Measure the wheel and tyre clearance
Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.
Leave travel for normal use
Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.
Set the geometry after the height
Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.
The current Falcon BA/BF 2002-2008 range.
Compare the controls and hardware included in each range.
BCR-E-25 is listed for the 2002-2007 Falcon saloon at 10 kg/mm front and 8 kg/mm rear, and BCR-E-26 for the wagon and ute at 10 kg/mm front with no rear rate listed. Both have 30-way rebound adjustment.
View BC Racing Falcon BA/BF 2002-2008 kitsFind your Falcon BA/BF 2002-2008 coilovers.
Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.
2 listings
Selected application: All Falcon BA/BF 2002-2008 applications
Match the drivetrain, body style and axle-load limits on the product page before ordering.
![BC Racing Coilovers - Ford Falcon Sedan (02-07) [BA/BF]](/images/09cf8cd191b679-480.webp)
BC Racing · BCR-E-25
BC Racing Coilovers - Ford Falcon Sedan (02-07) [BA/BF]
Check the exact application
![BC Racing Coilovers - Ford Falcon Wagon/Ute (02-07) [BA/BF]](/images/09cf8cd191b679-480.webp)
BC Racing · BCR-E-26
BC Racing Coilovers - Ford Falcon Wagon/Ute (02-07) [BA/BF]
Check the exact application
All Falcon BA/BF 2002-2008 kit links and part numbers
Before you order.
Identify your car
Send the VIN, body, engine and how the car is loaded.
Match the kit
Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.
Check what’s included
Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.
Check your modifications
Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.
Plan fitting
Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.
Questions about Ford Falcon BA/BF 2002-2008 coilovers.
Check the details before choosing your kit.
Why is there no rear rate for the ute?
BC lists no rear rate for BCR-E-26. Ask BC what it supplies at the rear.
Does it fit the FG?
No. The FG has its own kits.
How low should I set the car?
Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Falcon. Check the alignment at the final height.
When should I book fitting?
Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.
Let’s talk suspension.
Send the Falcon's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.



