Orange Ford Falcon FG XR6 Turbo saloon on dark wheels in a Yorkshire Dales lay-by

Ford Falcon FG 2008-2016.
The coilover guide.

Shop the coilovers

BC lists separate kits for the FG saloon and ute. Confirm the body before ordering.

Which Falcon FG 2008-2016 do you have?2 listed kits · 1 brandReviewed 21 November 2026

Ford Falcon FG history

The FG Falcon was the last Australian-built Falcon, made from 2008 to 2016, including the FG X update. BC lists BCR-E-27 for the saloon at 10 kg/mm front and 8 kg/mm rear, and BCR-E-28 for the ute at 11 kg/mm front.

UK cars are imports.

Ford Australia launched the FG Falcon in 2008, with the Barra six-cylinder, turbo and V8 engines.

The FG X facelift arrived in 2014, and Falcon production ended in October 2016 when Ford closed its Australian factories.

The XR6 Turbo and FPV versions are now sought after.

Start with your Falcon FG 2008-2016.

Confirm the chassis, year and existing suspension before choosing your setup.

White Ford Falcon FG saloon on silver wheels on a country lane

Saloon

BC lists BCR-E-27 for the 2008-2016 saloon. Give the supplier the VIN and engine.

Check my Falcon
Black Ford Falcon FG ute outside a modern workshop

Ute

BC lists BCR-E-28 for the ute at 11 kg/mm front, with no rear rate listed. Ask BC what it supplies at the rear.

Check my Falcon ute
Orange Ford Falcon FG XR6 Turbo in a Yorkshire Dales lay-by

XR6 Turbo, XR8 and FG X

Tell the supplier the version and whether the car is an FG X, so the kit can be confirmed.

Check my XR6 Turbo

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · BC Racing E-27, subject to an application check

BC lists BCR-E-27 for the FG saloon.

Read the buying advice

BCR-E-27 is a possible starting point once the supplier has confirmed fitment. It has 30-way rebound adjustment and height set separately from spring preload. Keep the drop modest and include alignment.

  • Confirm the saloon
  • Keep the drop modest
  • Include alignment
View current configurations
Selected configurationSee optionsinc. VAT · BC Racing E-28, subject to an application check

BC lists BCR-E-28 for the FG ute.

Read the buying advice

BC lists no rear rate for this kit. Ask what it supplies at the rear, and plan the height for the load.

  • Confirm the ute
  • Ask about the rear
  • Check when loaded
View current configurations

If you are changing wheels too, plan both so the tyres clear the arches.

Read the buying advice

Give the fitter the new wheel and tyre sizes before setting the height. Check clearance through full steering lock and suspension travel, and set the alignment last.

  • Give wheel and tyre sizes
  • Check clearance on lock
  • Set alignment last
Discuss wheels and suspension for my Falcon

Know how the rear works

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Ford Falcon, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

Ask the supplier what each kit supplies at the rear of the Falcon, and whether it keeps a separate rear spring.

Check the rear alignment readings at the final ride height.

Read about ride height and spring preload
Blue Ford Falcon FG XR8 standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the body

Check the VIN to confirm whether the car is a saloon or ute, and which engine it has.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Falcon FG 2008-2016 range.

Compare the controls and hardware included in each range.

BC Racing

BCR-E-27 is listed for the 2008-2016 Falcon saloon at 10 kg/mm front and 8 kg/mm rear, and BCR-E-28 for the ute at 11 kg/mm front with no rear rate listed. Both have 30-way rebound adjustment.

View BC Racing Falcon FG 2008-2016 kits

Find your Falcon FG 2008-2016 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

2 listings

Selected application: All Falcon FG 2008-2016 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All Falcon FG 2008-2016 kit links and part numbers

Before you order.

  1. Identify your car

    Send the VIN, body, engine and how the car is loaded.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Ford Falcon FG 2008-2016 coilovers.

Check the details before choosing your kit.

Does it fit the BA or BF?

No. The BA and BF have their own kits.

Does it fit the FG X?

BC lists 2008-2016 cars. Confirm with the supplier from the VIN.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Falcon. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Falcon's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.