Blue Ford Fiesta ST Mk7 on dark wheels in a Peak District lay-by

Ford Fiesta Mk7 2008-2017.
The coilover guide.

Shop the coilovers

BC lists separate kits for the standard Fiesta and the ST, each with a rear-integrated option. Confirm the version, then choose for how the car is used.

Which Fiesta Mk7 2008-2017 do you have?13 listed kits · 4 brandsReviewed 21 November 2026

Ford Fiesta Mk7 history

The seventh-generation Fiesta, chassis JA8, was built from 2008 to 2017, with the 1.6 EcoBoost ST from 2013. BC lists BCR-E-13 for standard cars and BCR-E-29 for the ST, both at 5 kg/mm front and 3 kg/mm rear, plus rear-integrated versions E-52 and E-53 at 2 kg/mm rear.

SPAX lists RSX kits, AST lists five kits for the Zetec S, and Nitron lists R1 and R3.

Ford launched the Mk7 Fiesta in 2008 with its kinetic design. It was facelifted in 2013 with a larger trapezoid grille and the 1.0 EcoBoost engine.

The Fiesta ST arrived in 2013 with a 1.6 EcoBoost, and the ST200 followed in 2016. The Mk8 replaced it in 2017.

The Zetec S was the sporty non-ST version and is popular with modifiers.

Start with your Fiesta Mk7 2008-2017.

Match the model year, drivetrain and body style before comparing brands.

White Ford Fiesta Zetec S on silver wheels on a town street

Standard Fiesta and Zetec S

BC lists BCR-E-13 and the rear-integrated BCR-E-52 for 2008-2017 cars. SPAX lists RSX115 and RSX3-230 with 35-70 mm lowering, and AST lists kits for the Zetec S.

Check my Fiesta
Red Ford Fiesta ST Mk7 outside a modern workshop

Fiesta ST

BC lists BCR-E-29 and the rear-integrated BCR-E-53 for the 2013-2017 ST. Give the supplier the VIN and version.

Check my Fiesta ST
Blue Ford Fiesta ST Mk7 in a Peak District lay-by

Track use

Nitron lists R1 and R3 kits for the Mk7, and AST lists two- and three-way kits for the Zetec S. Describe the tyres and events.

Check my track Fiesta

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · BC Racing E-13 V1 VM, subject to an application check

BC lists BCR-E-13 for 2008-2017 cars. Confirm the version first.

Read the buying advice

BCR-E-13 is a possible starting point once the supplier has confirmed fitment. It has 30-way rebound adjustment and height set separately from spring preload. Keep enough travel for UK roads and include alignment.

  • Confirm the version
  • Keep clearance for humps
  • Include alignment
View current configurations
Selected configurationSee optionsinc. VAT · BC Racing E-29 BR RA, subject to an application check

BC lists BCR-E-29 for the 2013-2017 ST.

Read the buying advice

The ST has its own BC reference. BCR-E-53 is the rear-integrated version. Ask BC which suits your car and agree a sensible height.

  • Confirm the ST
  • Choose the rear type
  • Include alignment
View current configurations

Nitron lists R1 and R3 kits for the Mk7. Agree the specification with Nitron.

Read the buying advice

R3 sets rebound and both compression speeds separately. Agree rates, valving and settings for your tyres and events, and confirm delivery timing.

  • Confirm the version
  • Agree rates and valving
  • Confirm delivery timing
Discuss a Nitron kit for my Fiesta

Know how the rear works

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Ford Fiesta, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The Fiesta has a torsion-beam rear axle with the spring separate from the damper. Some kits keep a separate rear spring and others use a rear coilover, so check what each kit supplies.

A beam axle has little alignment adjustment, so check the rear readings at the final ride height.

Read about ride height and spring preload
Grey Ford Fiesta Mk7 standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the version

Check the VIN to confirm whether the car is a standard Fiesta, Zetec S or ST, and its build date.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Fiesta Mk7 2008-2017 range.

Compare the controls and hardware included in each range.

BC Racing

BCR-E-13 is listed for the 2008-2017 Fiesta and BCR-E-29 for the 2013-2017 ST, both at 5 kg/mm front and 3 kg/mm rear with several top-mount versions. BCR-E-52 and BCR-E-53 are rear-integrated versions at 2 kg/mm rear. All have 30-way rebound adjustment.

View BC Racing Fiesta Mk7 2008-2017 kits

SPAX

RSX115 (single adjustable) and RSX3-230 (bump and rebound) are listed for the Mk7 Fiesta from October 2008, with 35-70 mm lowering. SPAX notes some rear set-ups keep a separate spring.

View SPAX Fiesta Mk7 2008-2017 kits

AST

For the Fiesta Zetec S JA8, AST lists the 5100 ACU-F4001S, Street Performance ACT-F4001S and Clubracing ACC-F4001S, the 5200 two-way RIV-F4001S and the 5300 three-way RAC-F4001S.

View AST Fiesta Mk7 2008-2017 kits

Nitron

Nitron lists R1 and R3 kits for the Fiesta Mk7. R1 has a combined damping adjuster; R3 has separate rebound, low-speed and high-speed compression controls. They are supplied to order.

View Nitron Fiesta Mk7 2008-2017 kits

Find your Fiesta Mk7 2008-2017 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

13 listings

Selected application: All Fiesta Mk7 2008-2017 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

6 of 13 shown
All Fiesta Mk7 2008-2017 kit links and part numbers

Before you order.

  1. Identify your car

    Send the VIN, engine, version and build date.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Ford Fiesta Mk7 2008-2017 coilovers.

Check the details before choosing your kit.

What does rear integrated mean?

BC's E-52 and E-53 are versions with a different rear arrangement and a 2 kg/mm rear rate. Ask BC which suits your car.

Does the AST Zetec S kit fit the ST?

AST lists those kits for the Zetec S. Ask before ordering for an ST.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Fiesta. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Fiesta's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.