Yellow Ford Fiesta ST Mk8 on dark wheels in a Yorkshire Dales lay-by

Ford Fiesta Mk8 2017-2023.
The coilover guide.

Shop the coilovers

BC lists a kit for the Mk8 ST and Bilstein lists one for standard and ST-Line cars. Confirm the version before ordering.

Which Fiesta Mk8 2017-2023 do you have?2 listed kits · 2 brandsReviewed 21 November 2026

Ford Fiesta Mk8 history

The eighth and final Fiesta was built from 2017 to 2023, with the 1.5 EcoBoost three-cylinder ST from 2018. BC lists BCR-E-54 for the ST at 5 kg/mm front and 3 kg/mm rear.

Bilstein lists B14 47-275713 for the 1.0 EcoBoost, 1.1 and 1.5 TDCi, with lowering that depends on whether the car has the standard or ST-Line chassis.

Ford launched the Mk8 Fiesta in 2017, with ST-Line, Active and Vignale versions alongside the standard car.

The Fiesta ST arrived in 2018 with a 1.5-litre three-cylinder turbo, and a facelift followed in 2022. Production ended in 2023.

Bilstein uses Ford's European numbering, calling this car the Fiesta VII.

Start with your Fiesta Mk8 2017-2023.

Match the model year, drivetrain and body style before comparing brands.

White Ford Fiesta ST-Line on black wheels on a suburban street

Standard and ST-Line

Bilstein lists 47-275713 for the 1.0 EcoBoost, 1.1 and 1.5 TDCi: 20-55 mm front and 30-45 mm rear on the standard chassis, or 10-45 mm and 20-35 mm with ST-Line sports suspension.

Check my Fiesta
Blue Ford Fiesta Mk8 outside a modern workshop

Fiesta Van

Bilstein lists the same kit for the Fiesta Van from 2018. Check the axle load ratings.

Check my Fiesta Van
Yellow Ford Fiesta ST Mk8 in a Yorkshire Dales lay-by

Fiesta ST

BC lists BCR-E-54 for the 2017-2023 ST in BR RS and ER versions. Give the supplier the VIN.

Check my Fiesta ST

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · BC Racing E-54 BR RS, subject to an application check

BC lists BCR-E-54 for the Mk8 ST. Confirm the car first.

Read the buying advice

BCR-E-54 is a possible starting point once the supplier has confirmed fitment. It has 30-way rebound adjustment and height set separately from spring preload. Keep the drop sensible and include alignment.

  • Confirm the ST
  • Keep the drop modest
  • Include alignment
View current configurations
Selected configurationSee optionsinc. VAT · Bilstein B14 47-275713, subject to an application check

Bilstein lists 47-275713 for standard and ST-Line cars, with fixed damping.

Read the buying advice

B14 sets the height on a thread with fixed, vehicle-specific damping. The lowering range depends on whether the car has the standard or ST-Line chassis.

  • Confirm the chassis
  • Check axle ratings
  • Include alignment
View current configurations

If you are changing wheels too, plan both so the tyres clear the arches.

Read the buying advice

Give the fitter the new wheel and tyre sizes before setting the height. Check clearance through full steering lock and suspension travel, and set the alignment last.

  • Give wheel and tyre sizes
  • Check clearance on lock
  • Set alignment last
Discuss wheels and suspension for my Fiesta

Know how the rear works

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Ford Fiesta, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The Fiesta has a torsion-beam rear axle with the spring separate from the damper. Some kits keep a separate rear spring and others use a rear coilover, so check what each kit supplies.

A beam axle has little alignment adjustment, so check the rear readings at the final ride height.

Read about ride height and spring preload
Red Ford Fiesta Mk8 standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the version and chassis

Check the VIN to confirm the engine and whether the car is an ST, ST-Line or standard Fiesta.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Fiesta Mk8 2017-2023 range.

Compare the controls and hardware included in each range.

BC Racing

BCR-E-54 is listed for the 2017-2023 Fiesta ST, in BR RS and ER versions, with 30-way rebound adjustment and default rates of 5 kg/mm front and 3 kg/mm rear.

View BC Racing Fiesta Mk8 2017-2023 kits

Bilstein

B14 47-275713 is listed for the Fiesta 1.0 EcoBoost, 1.1 Ti-VCT and 1.5 TDCi from May 2017 and the Fiesta Van from 2018, with axle loads to 890 kg front and 840 kg rear. Lowering is 20-55 mm front and 30-45 mm rear on the standard chassis, or 10-45 mm and 20-35 mm with ST-Line sports suspension.

View Bilstein Fiesta Mk8 2017-2023 kits

Find your Fiesta Mk8 2017-2023 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

2 listings

Selected application: All Fiesta Mk8 2017-2023 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All Fiesta Mk8 2017-2023 kit links and part numbers

Before you order.

  1. Identify your car

    Send the VIN, engine, version and axle load ratings.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Ford Fiesta Mk8 2017-2023 coilovers.

Check the details before choosing your kit.

Does the Bilstein kit fit the ST?

Bilstein lists it for the 1.0, 1.1 and 1.5 TDCi. For the ST, BC lists BCR-E-54.

Why does the lowering differ on ST-Line cars?

ST-Line cars already have sports suspension, so Bilstein lists a smaller range.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Fiesta. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Fiesta's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.