Dark blue Ford Flex with a white roof on dark wheels in a Peak District lay-by

Ford Flex 2009-2012.
The coilover guide.

Shop the coilovers

The Flex is a long three-row crossover, so BC lists a stiff rear rate. Keep the drop modest and check the car loaded.

Which Flex 2009-2012 do you have?1 listed kit · 1 brandReviewed 21 November 2026

Ford Flex history

The Ford Flex was a three-row crossover built from 2009 to 2019, with its boxy shape and contrasting roof. BC lists BCR-E-17 for 2009-2012 cars at 6 kg/mm front and 14 kg/mm rear.

UK cars are imports, and BC's listing covers the early cars.

Ford launched the Flex in 2008 for the 2009 model year, on the platform shared with the Taurus, with front- and all-wheel drive.

An EcoBoost twin-turbo V6 arrived in 2010, and a 2013 facelift changed the nose. Production ended in 2019.

It seats up to seven, so plan the suspension for a full load.

Start with your Flex 2009-2012.

Confirm the chassis, year and existing suspension before choosing your setup.

Silver Ford Flex on silver wheels on a village street

2009-2012 Flex

BC lists BCR-E-17 for 2009-2012 cars. Give the supplier the VIN and drivetrain.

Check my Flex
Red Ford Flex with a white roof outside a modern workshop

Family loads

Set the height with the car loaded and keep enough travel.

Check my loaded Flex
Dark blue Ford Flex in a Peak District lay-by

2013-on Flex

BC's listing runs to 2012. Ask before ordering for a facelifted car.

Check my later Flex

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · BC Racing E-17, subject to an application check

BC lists BCR-E-17 for the 2009-2012 Ford Flex. Confirm the car first.

Read the buying advice

BCR-E-17 is a possible starting point once the supplier has confirmed fitment. It has 30-way rebound adjustment and height set separately from spring preload. Keep the drop modest and include alignment.

  • Confirm the model
  • Keep the drop modest
  • Include alignment
View current configurations

Set the height with the car loaded as it is usually used.

Read the buying advice

Agree a modest height, check it with passengers, luggage or a trailer, and keep enough travel. Set the alignment last.

  • Check height when loaded
  • Keep enough travel
  • Set alignment last
Discuss loads with my Flex

If you are changing wheels too, plan both so the tyres clear the arches.

Read the buying advice

Give the fitter the new wheel and tyre sizes before setting the height. Check clearance through full steering lock and suspension travel, and set the alignment last.

  • Give wheel and tyre sizes
  • Check clearance on lock
  • Set alignment last
Discuss wheels and suspension for my Flex

Know how the rear works

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Ford Flex, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

Ask the supplier what each kit supplies at the rear of the Flex, and whether it keeps a separate rear spring.

Check the rear alignment readings at the final ride height.

Read about ride height and spring preload
Black Ford Flex standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the year and drivetrain

Check the VIN to confirm the year and whether the car is front- or all-wheel drive.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Flex 2009-2012 range.

See the controls and hardware in the listed kit.

BC Racing

BCR-E-17 is listed for the 2009-2012 Ford Flex, with 30-way rebound adjustment and default rates of 6 kg/mm front and 14 kg/mm rear.

View BC Racing Flex 2009-2012 kits

Find your Flex 2009-2012 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

1 listing

Selected application: All Flex 2009-2012 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All Flex 2009-2012 kit links and part numbers

Before you order.

  1. Identify your car

    Send the VIN, year, drivetrain and towing use.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Ford Flex 2009-2012 coilovers.

Check the details before choosing your kit.

Does it fit the 2013-on Flex?

BC lists 2009-2012 cars. Ask before ordering for a later one.

Why is the rear rate high?

The Flex is long and heavy at the rear when loaded, which BC allows for.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Flex. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Flex's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.