Electric Orange Ford Focus ST Mk2 on dark wheels in a Peak District lay-by

Ford Focus Mk2 2004-2011.
The coilover guide.

Shop the coilovers

SPAX lists separate kits for the hatch, estate, cabriolet and ST, and AST lists five-cylinder ST kits. Confirm the version and body first.

Which Focus Mk2 2004-2011 do you have?18 listed kits · 4 brandsReviewed 21 November 2026

Ford Focus Mk2 history

The second-generation Focus was built from 2004 to 2011, with the five-cylinder ST225 from 2005. BC lists BCR-E-06 for 2004-2011 cars at 6 kg/mm front and 5.5 kg/mm rear.

SPAX lists RSX kits for the hatch, estate, cabriolet and ST, AST lists seven kits for the ST, and Nitron lists R1 and R3.

Ford launched the Mk2 Focus in 2004 on a platform shared with Volvo and Mazda. Estate, saloon and a Pininfarina-styled coupe-cabriolet followed.

The Focus ST arrived in 2005 with a 2.5-litre five-cylinder turbo, and a facelift in 2008 brought a new nose. The Mk3 replaced it in 2011.

The RS has its own guide.

Start with your Focus Mk2 2004-2011.

Match the model year, drivetrain and body style before comparing brands.

Silver Ford Focus Mk2 five-door on silver wheels on a suburban street

Hatchback, saloon and estate

BC lists BCR-E-06 for 2004-2011 cars. SPAX lists RSX940 and RSX3-1880 for most engines and RSX114 and RSX3-228 for the estate, all with 35-65 mm lowering.

Check my Focus
Blue Ford Focus Mk2 estate outside a modern workshop

Estate and cabriolet

SPAX lists RSX114 and RSX3-228 for the estate and RSX113 and RSX3-226 for the 2006-on cabriolet.

Check my estate or CC
Electric Orange Ford Focus ST Mk2 in a Peak District lay-by

Focus ST225

SPAX lists RSX941 and RSX3-1882 for the ST with 25-55 mm lowering. AST lists 5100, 5200 and 5300 kits, some keeping a separate rear spring.

Check my Focus ST

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · BC Racing E-06 BR RA, subject to an application check

BC lists BCR-E-06 for 2004-2011 cars. Confirm the version first.

Read the buying advice

BCR-E-06 is a possible starting point once the supplier has confirmed fitment. It has 30-way rebound adjustment and height set separately from spring preload. Keep enough travel and include alignment.

  • Confirm the version
  • Keep the drop modest
  • Include alignment
View current configurations
Selected configurationSee optionsinc. VAT · SPAX RSX941, subject to an application check

SPAX lists RSX941 for the ST, with 25-55 mm lowering.

Read the buying advice

The ST already sits lower, so its kit has a smaller range. RSX3-1882 adds separate bump and rebound. SPAX notes some rear set-ups keep a separate spring.

  • Confirm the ST
  • Check the rear set-up
  • Include alignment
View current configurations
Selected configurationSee optionsinc. VAT · AST ACU-F1103S, subject to an application check

AST's 5100 ACU-F1103S has coilovers front and rear and reuses the original top mounts.

Read the buying advice

The 5100 kit has rebound and height adjustment. AST's 5200 and 5300 kits add remote reservoirs and separate compression; AST notes body modification for the reservoirs on the 5300.

  • Confirm the ST
  • Choose the rear type
  • Confirm lead time
View current configurations

Know how the rear works

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Ford Focus, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The Focus has a multi-link rear with the spring separate from the damper. Some kits keep a separate rear spring and others use a rear coilover, so check what each kit supplies.

Check the rear camber and toe at the final ride height.

Read about ride height and spring preload
Black Ford Focus Mk2 standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the version and body

Check the VIN to confirm the engine, body and whether the car is an ST.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Focus Mk2 2004-2011 range.

Compare the controls and hardware included in each range.

BC Racing

BCR-E-06 is listed for the 2004-2011 Focus in BR RA, RM MA, ER and ZX versions, with 30-way rebound adjustment and default rates of 6 kg/mm front and 5.5 kg/mm rear.

View BC Racing Focus Mk2 2004-2011 kits

SPAX

RSX940 and RSX3-1880 are listed for the 1.4-2.0 petrol and TDCi Focus 2, RSX114 and RSX3-228 for the estate and RSX113 and RSX3-226 for the cabriolet, all with 35-65 mm lowering. RSX941 and RSX3-1882 are listed for the ST with 25-55 mm.

View SPAX Focus Mk2 2004-2011 kits

AST

For the Focus ST DA, AST lists the 5100 ACU-F1103S and Street Performance ACT-F1103S with rear coilovers, ACU-F1101S and ACT-F1101S with separate rear springs, the Clubracing ACC-F1103S, the 5200 RIV-F1101S and the 5300 RAC-F1101S.

View AST Focus Mk2 2004-2011 kits

Nitron

Nitron lists R1 and R3 kits for the Focus Mk2. R1 has a combined damping adjuster; R3 has separate rebound, low-speed and high-speed compression controls. They are supplied to order.

View Nitron Focus Mk2 2004-2011 kits

Find your Focus Mk2 2004-2011 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

18 listings

Selected application: All Focus Mk2 2004-2011 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

6 of 18 shown
All Focus Mk2 2004-2011 kit links and part numbers

Before you order.

  1. Identify your car

    Send the VIN, engine, version and body.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Ford Focus Mk2 2004-2011 coilovers.

Check the details before choosing your kit.

Does it fit the Focus RS?

No. The Mk2 RS has its own guide and kits.

What is the difference between AST's ST kits?

F1103S kits have coilovers front and rear; F1101S kits keep a separate rear spring. The 5200 and 5300 add remote reservoirs.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Focus. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Focus's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.