Orange Ford Focus ST Mk4 on dark wheels in a Cotswolds lay-by

Ford Focus Mk4 2018-on.
The coilover guide.

Shop the coilovers

The Mk4 Focus comes with either a torsion-beam or multi-link rear, and BC lists a kit for each. Check which your car has before ordering.

Which Focus Mk4 2018-on do you have?4 listed kits · 1 brandReviewed 21 November 2026

Ford Focus Mk4 history

The fourth-generation Focus arrived in 2018, with a torsion-beam rear on lower-powered cars and a multi-link rear on others. BC lists BCR-E-36 for beam-rear cars at 5 kg/mm front and 3 kg/mm rear, and BCR-E-37 for multi-link cars at 5.5 kg/mm front and 5 kg/mm rear.

BC lists BCR-E-47 for the ST hatch with continuously controlled damping and BCR-E-41 for the ST estate.

Ford launched the Mk4 Focus in 2018 on its C2 platform, with hatchback and estate bodies and ST-Line, Active and Vignale versions.

The ST arrived in 2019 with a 2.3 EcoBoost or 2.0 diesel, and a 2022 facelift brought a new nose. Production is due to end in 2025.

Which rear suspension a car has depends on the engine and version, so check before ordering.

Start with your Focus Mk4 2018-on.

Confirm the chassis, year and existing suspension before choosing your setup.

Grey Ford Focus ST-Line Mk4 on black wheels on a suburban street

Beam or multi-link rear

BC lists BCR-E-36 for torsion-beam cars and BCR-E-37 for multi-link cars. Have the rear suspension checked or confirmed from the VIN.

Check my Focus
Blue Ford Focus ST Mk4 estate outside a modern workshop

ST estate

BC lists BCR-E-41 for the 2019-on ST estate, at 6 kg/mm front and 7 kg/mm rear.

Check my ST estate
Orange Ford Focus ST Mk4 in a Cotswolds lay-by

Focus ST hatch

BC lists BCR-E-47 for the 2019-on front-drive ST with continuously controlled damping and a multi-link rear. Ask how the kit deals with the factory damper control.

Check my Focus ST

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · BC Racing E-37 BR RA, subject to an application check

BC lists BCR-E-36 for beam-rear cars and BCR-E-37 for multi-link cars.

Read the buying advice

Confirm which rear your car has before ordering. Both have 30-way rebound adjustment and height set separately from spring preload. Keep the drop modest and include alignment.

  • Confirm the rear type
  • Keep the drop modest
  • Include alignment
View current configurations
Selected configurationSee optionsinc. VAT · BC Racing E-47, subject to an application check

BC lists BCR-E-47 for the 2019-on ST hatch.

Read the buying advice

The ST hatch has continuously controlled damping. Ask how the kit deals with the factory system and warning lights, and include alignment.

  • Confirm the ST
  • Ask about the dampers
  • Include alignment
View current configurations
Selected configurationSee optionsinc. VAT · BC Racing E-41 BR RA, subject to an application check

BC lists BCR-E-41 for the ST estate.

Read the buying advice

The estate has a stiffer listed rear rate. Keep enough travel for loads and include alignment.

  • Confirm the ST estate
  • Check when loaded
  • Include alignment
View current configurations

Know how the rear works

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Ford Focus, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

Lower-powered Mk4 cars have a torsion-beam rear and others a multi-link rear, both with the spring separate from the damper. BC lists a different kit for each.

Check the rear alignment readings at the final ride height.

Read about ride height and spring preload
White Ford Focus Mk4 standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the rear suspension

Check the VIN, engine and version to confirm whether the car has a torsion-beam or multi-link rear, and whether it is an ST.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Focus Mk4 2018-on range.

Compare the controls and hardware included in each range.

BC Racing

For the 2018-on Focus, BC lists BCR-E-36 for torsion-beam cars at 5 kg/mm front and 3 kg/mm rear, BCR-E-37 for multi-link cars at 5.5 kg/mm front and 5 kg/mm rear, BCR-E-47 for the 2019-on ST hatch with CCD at 5.5 kg/mm and 5 kg/mm, and BCR-E-41 for the ST estate at 6 kg/mm and 7 kg/mm. All have 30-way rebound adjustment.

View BC Racing Focus Mk4 2018-on kits

Find your Focus Mk4 2018-on coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

4 listings

Selected application: All Focus Mk4 2018-on applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All Focus Mk4 2018-on kit links and part numbers

Before you order.

  1. Identify your car

    Send the VIN, engine, version, body and rear suspension type.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Ford Focus Mk4 2018-on coilovers.

Check the details before choosing your kit.

How do I know which rear my Focus has?

It depends on the engine and version. Ask the supplier to confirm from the VIN, or have the rear checked.

What about the ST's adaptive dampers?

Ask the supplier how the kit deals with the continuously controlled damping and warning lights.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Focus. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Focus's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.