Ultimate Green Ford Focus RS Mk2 on dark wheels in a Scottish Highland lay-by

Ford Focus RS Mk2 2009-2011.
The coilover guide.

Shop the coilovers

The Mk2 RS has its own kits. Choose between BC for fast road use and AST's reservoir kits for circuit work.

Which Focus RS Mk2 2009-2011 do you have?5 listed kits · 2 brandsReviewed 21 November 2026

Ford Focus RS Mk2 history

The Mk2 Focus RS was built from 2009 to 2011 with a 2.5-litre five-cylinder turbo and Ford's RevoKnuckle front suspension, followed by the limited RS500. BC lists BCR-E-14 for it at 6 kg/mm front and 4 kg/mm rear.

AST lists the 5100 ACU-F1105S and Clubracing ACC-F1105S, the 5200 RIV-F1102S and the 5300 RAC-F1102S.

Ford launched the Mk2 RS in 2009 with 300 bhp sent through the front wheels, using the RevoKnuckle front strut to reduce torque steer.

The RS500, limited to 500 cars and mostly matt black, followed in 2010 with 350 bhp. Production ended in 2011.

These cars are now valued, so keep the original parts.

Start with your Focus RS Mk2 2009-2011.

Match the model year, drivetrain and body style before comparing brands.

White Ford Focus RS Mk2 on black wheels on a country lane

Focus RS

BC lists BCR-E-14 for the 2009-2011 RS in BR RA, RM MA, ER and ZX versions. Give the supplier the VIN.

Check my Focus RS
Blue Ford Focus RS Mk2 in a circuit paddock

Track days

AST's 5200 and 5300 kits have remote reservoirs and separate compression. AST notes body modification is needed for the reservoirs.

Check my track RS
Ultimate Green Ford Focus RS Mk2 in a Highland lay-by

RS500

Tell the supplier if the car is an RS500, and keep the original parts.

Check my RS500

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · BC Racing E-14 BR RA, subject to an application check

BC lists BCR-E-14 for the Mk2 RS.

Read the buying advice

BCR-E-14 is a possible starting point once the supplier has confirmed fitment. It has 30-way rebound adjustment and height set separately from spring preload. Keep the drop modest and include alignment.

  • Confirm the RS
  • Keep the drop modest
  • Include alignment
View current configurations
Selected configurationSee optionsinc. VAT · AST ACU-F1105S, subject to an application check

AST's ACU-F1105S has coilovers front and rear and reuses the original top mounts.

Read the buying advice

The 5100 kit has rebound and height adjustment. Agree settings with the supplier and confirm lead time.

  • Confirm the RS
  • Agree settings
  • Confirm lead time
View current configurations
Selected configurationSee optionsinc. VAT · AST RAC-F1102S, subject to an application check

AST's RAC-F1102S adds remote reservoirs and separate high- and low-speed compression.

Read the buying advice

AST notes body modification is needed for the external reservoirs. Agree settings for your tyres and events and confirm the lead time.

  • Plan the reservoir mounting
  • Agree settings
  • Confirm lead time
View current configurations

Know how the rear works

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Ford Focus RS, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The Focus RS has a multi-link rear with the spring separate from the damper. Some kits keep a separate rear spring and others use a rear coilover, so check what each kit supplies.

Check the rear camber and toe at the final ride height.

Read about ride height and spring preload
Black Ford Focus RS Mk2 standing on its wheels beside an empty two-post lift in a motorsport workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the RS

Check the VIN to confirm the car is a Mk2 RS or RS500, and note any earlier suspension changes.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Focus RS Mk2 2009-2011 range.

Compare the controls and hardware included in each range.

BC Racing

BCR-E-14 is listed for the 2009-2011 Focus RS in BR RA, RM MA, ER and ZX versions, with 30-way rebound adjustment and default rates of 6 kg/mm front and 4 kg/mm rear.

View BC Racing Focus RS Mk2 2009-2011 kits

AST

For the Focus RS DA, AST lists the 5100 ACU-F1105S and Clubracing ACC-F1105S with coilovers front and rear, the 5200 two-way RIV-F1102S and the 5300 three-way RAC-F1102S. AST notes body modification is needed for the external reservoirs.

View AST Focus RS Mk2 2009-2011 kits

Find your Focus RS Mk2 2009-2011 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

5 listings

Selected application: All Focus RS Mk2 2009-2011 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All Focus RS Mk2 2009-2011 kit links and part numbers

Before you order.

  1. Identify your car

    Send the VIN, version and how the car is used.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Ford Focus RS Mk2 2009-2011 coilovers.

Check the details before choosing your kit.

Does the Focus ST kit fit the RS?

No. The RS has its own kits because of its different front suspension.

Do the AST reservoir kits need modification?

AST notes body modification for the external reservoirs on its motorsport kits.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Focus RS. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Focus RS's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.