
Ford Ka Mk2 RU8 2008-2016.
The coilover guide.
Shop the coiloversSPAX lists two RSX kits for the Ka Mk2. Keep the drop modest for town roads.
Ford Ka Mk2 history
The second-generation Ka, type RU8, was built from 2008 to 2016 alongside the Fiat 500, sharing its platform. SPAX lists RSX998 with single damping adjustment and RSX3-1996 with separate bump and rebound.
Both have 35-65 mm front and 15-40 mm rear lowering.
Ford launched the second Ka in 2008, built by Fiat in Poland on the platform shared with the Fiat 500 and Panda.
It had 1.2 petrol and 1.3 diesel engines, and was replaced by the larger Ka+ in 2016.
It is a light city car, so keep enough travel for speed humps.
Start with your Ka Mk2 RU8 2008-2016.
Confirm the chassis, year and existing suspension before choosing your setup.

Ka Mk2
SPAX lists RSX998 and RSX3-1996 for the Ka RU8 from 2009. Give the supplier the VIN and engine.
Check my Ka

Ka+ and first Ka
The Ka+ and the first-generation Ka are different cars. Ask before ordering for one.
Check another KaChoose a kit for your car and driving
Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.
SPAX lists RSX998 for the Ka Mk2.
Read the buying advice
RSX998 has adjustable damping and 35-65 mm front and 15-40 mm rear lowering. SPAX notes some rear set-ups keep a separate spring.
- Confirm the Ka Mk2
- Keep clearance for humps
- Include alignment
SPAX's RSX3-1996 adjusts bump and rebound separately.
Read the buying advice
The double-adjustable kit gives more control. Agree starting settings and set the alignment last.
- Confirm the Ka Mk2
- Agree settings
- Set alignment last
If you are changing wheels too, plan both so the tyres clear the arches.
Read the buying advice
Give the fitter the new wheel and tyre sizes before setting the height. Check clearance through full steering lock and suspension travel, and set the alignment last.
- Give wheel and tyre sizes
- Check clearance on lock
- Set alignment last
Know how the rear works
On a standard Ford Ka, the rear spring and shock absorber are mounted separately.
Layout only. Mounts and spring seats vary by kit.The Ka has a torsion-beam rear axle. SPAX notes some rear set-ups keep a separate spring, so check what the kit supplies.
A beam axle has little alignment adjustment, so check the rear readings at the final ride height.
Read about ride height and spring preload
Plan the fitting before the car arrives
Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.
Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.
Confirm the model
Check the VIN to confirm the car is a 2008-2016 Ka RU8.
Measure the wheel and tyre clearance
Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.
Leave travel for normal use
Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.
Set the geometry after the height
Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.
The current Ka Mk2 RU8 2008-2016 range.
Compare the controls and hardware included in each range.
RSX998 (single adjustable) and RSX3-1996 (bump and rebound) are listed for the Ford Ka RU8 from 2009, with 35-65 mm front and 15-40 mm rear lowering.
View SPAX Ka Mk2 RU8 2008-2016 kitsFind your Ka Mk2 RU8 2008-2016 coilovers.
Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.
2 listings
Selected application: All Ka Mk2 RU8 2008-2016 applications
Match the drivetrain, body style and axle-load limits on the product page before ordering.

SPAX · RSX3-1996
SPAX RSX Double Adjustable Coilover Kit for Ford Ka (Type RU8) - RSX3-1996
Check the exact application

SPAX · RSX998
SPAX RSX Coilover Kit for Ford Ka (Type RU8) - RSX998
Check the exact application
All Ka Mk2 RU8 2008-2016 kit links and part numbers
Before you order.
Identify your car
Send the VIN and engine.
Match the kit
Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.
Check what’s included
Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.
Check your modifications
Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.
Plan fitting
Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.
Questions about Ford Ka Mk2 RU8 2008-2016 coilovers.
Check the details before choosing your kit.
Does it fit the Ka+?
No. These kits are listed for the Ka RU8.
Does a Fiat 500 kit fit?
The cars share a platform, but order the kit listed for the Ka.
How low should I set the car?
Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Ka. Check the alignment at the final height.
When should I book fitting?
Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.
Let’s talk suspension.
Send the Ka's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.



