Red Ford Mondeo ST220 Mk3 hatchback on dark wheels in a Peak District lay-by

Ford Mondeo Mk3 2000-2007.
The coilover guide.

Shop the coilovers

SPAX lists separate kits for the hatch and saloon and for the estate. Confirm the body before ordering.

Which Mondeo Mk3 2000-2007 do you have?4 listed kits · 1 brandReviewed 21 November 2026

Ford Mondeo Mk3 history

The third Mondeo was built from 2000 to 2007 as a hatchback, saloon and estate, with the 3.0 V6 ST220 at the top. SPAX lists RSX787 and RSX3-1574 for the saloon and hatchback and RSX788 and RSX3-1576 for the estate.

All have 35-65 mm front lowering.

Ford launched the Mk3 Mondeo in 2000, larger and more refined than before, with petrol, TDCi diesel and V6 engines.

The ST220 arrived in 2002 with a 3.0-litre V6. The Mk4 replaced it in 2007.

Estates were popular with families and fleets, so check the car's condition.

Start with your Mondeo Mk3 2000-2007.

Confirm the chassis, year and existing suspension before choosing your setup.

Silver Ford Mondeo Mk3 hatchback on silver wheels on a suburban street

Saloon and hatchback

SPAX lists RSX787 and RSX3-1574 for the saloon and hatchback, with 35-65 mm lowering front and rear.

Check my Mondeo
Blue Ford Mondeo Mk3 estate outside a modern workshop

Estate

SPAX lists RSX788 and RSX3-1576 for the estate, with 35-65 mm front and 35 mm rear lowering.

Check my Mondeo estate
Red Ford Mondeo ST220 in a Peak District lay-by

ST220 and V6

SPAX lists the kits for the 2.5 V6, and RSX3-1576 also for the 3.0 V6 estate. Tell the supplier if the car is an ST220.

Check my ST220

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · SPAX RSX787, subject to an application check

SPAX lists RSX787 for the saloon and hatchback.

Read the buying advice

RSX787 has adjustable damping and 35-65 mm lowering. SPAX notes some rear set-ups keep a separate spring. Keep the drop modest and include alignment.

  • Confirm the body
  • Check the rear set-up
  • Include alignment
View current configurations
Selected configurationSee optionsinc. VAT · SPAX RSX788, subject to an application check

SPAX lists RSX788 for the estate.

Read the buying advice

RSX788 lowers the front 35-65 mm and the rear 35 mm. Keep enough travel when the car is loaded.

  • Confirm the estate
  • Check when loaded
  • Include alignment
View current configurations
Selected configurationSee optionsinc. VAT · SPAX RSX3-1574, subject to an application check

SPAX's RSX3-1574 adjusts bump and rebound separately.

Read the buying advice

The double-adjustable kit gives more control. Agree starting settings and set the alignment last.

  • Confirm the body
  • Agree settings
  • Set alignment last
View current configurations

Know how the rear works

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Ford Mondeo, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The Mondeo has independent rear suspension. Some kits use a rear coilover and others keep a separate spring, so check what each kit supplies.

Check the rear camber and toe at the final ride height.

Read about ride height and spring preload
Black Ford Mondeo Mk3 saloon standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the body and engine

Check the VIN to confirm the body, engine and build date.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Mondeo Mk3 2000-2007 range.

Compare the controls and hardware included in each range.

SPAX

RSX787 (single adjustable) and RSX3-1574 (bump and rebound) are listed for the 2000-2007 saloon and hatchback with 35-65 mm lowering, and RSX788 and RSX3-1576 for the estate with 35-65 mm front and 35 mm rear lowering. SPAX notes some rear set-ups keep a separate spring.

View SPAX Mondeo Mk3 2000-2007 kits

Find your Mondeo Mk3 2000-2007 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

4 listings

Selected application: All Mondeo Mk3 2000-2007 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All Mondeo Mk3 2000-2007 kit links and part numbers

Before you order.

  1. Identify your car

    Send the VIN, engine and body.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Ford Mondeo Mk3 2000-2007 coilovers.

Check the details before choosing your kit.

Does the hatch kit fit the estate?

No. SPAX lists separate kits for the estate.

Does it fit the ST220?

Tell the supplier the engine; SPAX lists the V6 cars.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Mondeo. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Mondeo's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.