Grey Ford Mondeo Titanium X Mk4 on dark wheels in a Cotswolds lay-by

Ford Mondeo Mk4 2007-2014.
The coilover guide.

Shop the coilovers

BC lists one kit for the front-drive Mk4 Mondeo. Confirm the body and how the car is loaded, then keep the drop sensible.

Which Mondeo Mk4 2007-2014 do you have?1 listed kit · 1 brandReviewed 21 November 2026

Ford Mondeo Mk4 history

The fourth Mondeo was built from 2007 to 2014 as a hatchback, saloon and estate. BC lists BCR-E-12 for front-drive cars at 7 kg/mm front and 6.5 kg/mm rear.

BC's listing runs to 2012; ask about later cars.

Ford launched the Mk4 Mondeo in 2007, larger again, with kinetic-design styling and EcoBoost engines from 2010.

A 2010 facelift updated the lights and interior. The Mk5 replaced it in 2014.

Many estates are used for towing and long distances, so plan the height for the load.

Start with your Mondeo Mk4 2007-2014.

Confirm the chassis, year and existing suspension before choosing your setup.

Silver Ford Mondeo Mk4 estate on silver wheels on a suburban street

Hatchback and saloon

BC lists BCR-E-12 for front-drive Mk4s. Give the supplier the VIN and engine.

Check my Mondeo
Black Ford Mondeo Mk4 outside a modern workshop

Estate and towing

Tell the supplier if the car is an estate or tows, so it can confirm the rates and height.

Check my Mondeo estate
Grey Ford Mondeo Titanium X in a Cotswolds lay-by

2013-2014 cars

BC's listing runs to 2012. Ask before ordering for a 2013-2014 car.

Check my late Mk4

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · BC Racing E-12, subject to an application check

BC lists BCR-E-12 for front-drive Mk4s.

Read the buying advice

BCR-E-12 is a possible starting point once the supplier has confirmed fitment. It has 30-way rebound adjustment and height set separately from spring preload. Keep the drop modest and include alignment.

  • Confirm the body
  • Keep the drop modest
  • Include alignment
View current configurations

Set the height with the car loaded as it is usually used.

Read the buying advice

Agree a modest height, check it with the car loaded or towing, and set the alignment last.

  • Check height when loaded
  • Keep enough travel
  • Set alignment last
Discuss towing with my Mondeo

If you are changing wheels too, plan both so the tyres clear the arches.

Read the buying advice

Give the fitter the new wheel and tyre sizes before setting the height. Check clearance through full steering lock and suspension travel, and set the alignment last.

  • Give wheel and tyre sizes
  • Check clearance on lock
  • Set alignment last
Discuss wheels and suspension for my Mondeo

Know how the rear works

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Ford Mondeo, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The Mondeo has independent rear suspension. Some kits use a rear coilover and others keep a separate spring, so check what each kit supplies.

Check the rear camber and toe at the final ride height.

Read about ride height and spring preload
Blue Ford Mondeo Mk4 standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the body and year

Check the VIN to confirm the body, engine and build date.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Mondeo Mk4 2007-2014 range.

See the controls and hardware in the listed kit.

BC Racing

BCR-E-12 is listed for the 2007-2012 front-drive Mondeo, with 30-way rebound adjustment and default rates of 7 kg/mm front and 6.5 kg/mm rear.

View BC Racing Mondeo Mk4 2007-2014 kits

Find your Mondeo Mk4 2007-2014 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

1 listing

Selected application: All Mondeo Mk4 2007-2014 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All Mondeo Mk4 2007-2014 kit links and part numbers

Before you order.

  1. Identify your car

    Send the VIN, engine, body and towing use.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Ford Mondeo Mk4 2007-2014 coilovers.

Check the details before choosing your kit.

Does it fit the estate?

Tell the supplier the body so BC can confirm the rates.

Does it fit the Mk5?

No. The 2014-on Mondeo has its own kits.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Mondeo. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Mondeo's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.