
Holden Commodore VB-VL 1978-1988.
The coilover guide.
Shop the coiloversThe early Commodores are now classics. BC lists one kit for the VB to VL; check the car's condition and keep the original parts.
Holden Commodore VB-VL history
The first Commodore, the VB, arrived in 1978 and was developed through the VC, VH, VK and VL until 1988. BC lists BCR-ZW-06 for these cars at 6 kg/mm front and 6 kg/mm rear.
UK cars are imports, so check the specification.
Holden based the first Commodore on the Opel Rekord and Senator, widened for Australian conditions, with four-, six- and V8 engines.
The VL of 1986 used a Nissan-sourced six-cylinder, including a turbo, and the Group A SS versions are highly valued.
Many survivors have been modified, so check the car before ordering.
Start with your Commodore VB-VL 1978-1988.
Confirm the chassis, year and existing suspension before choosing your setup.

VB to VL saloon
BC lists BCR-ZW-06 for 1978-1988 cars. Give the supplier the VIN, model and engine.
Check my Commodore
Classic condition
Have the mounts, bushes and rear axle checked, and keep the original parts.
Check my older Commodore
VL turbo and Group A
Tell the supplier if the car is a VL turbo or SS Group A, so the kit can be confirmed.
Check my VLChoose a kit for your car and driving
Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.
BC lists BCR-ZW-06 for the 1978-1988 Holden Commodore. Confirm the car first.
Read the buying advice
BCR-ZW-06 is a possible starting point once the supplier has confirmed fitment. It has 30-way rebound adjustment and height set separately from spring preload. Keep the drop modest and include alignment.
- Confirm the model
- Keep the drop modest
- Include alignment
Have the mounts and bushes checked first, and keep the original parts.
Read the buying advice
Ask a specialist to inspect the suspension mounts, bushes and any rust. Fix problems first, keep the original parts, and set the alignment last.
- Inspect the mounts
- Keep original parts
- Set alignment last
If you are changing wheels too, plan both so the tyres clear the arches.
Read the buying advice
Give the fitter the new wheel and tyre sizes before setting the height. Check clearance through full steering lock and suspension travel, and set the alignment last.
- Give wheel and tyre sizes
- Check clearance on lock
- Set alignment last
Know how the rear works
On a standard Holden Commodore, the rear spring and shock absorber are mounted separately.
Layout only. Mounts and spring seats vary by kit.Ask the supplier what each kit supplies at the rear of the Commodore, and whether it keeps a separate rear spring.
Check the rear alignment readings at the final ride height.
Read about ride height and spring preload
Plan the fitting before the car arrives
Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.
Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.
Confirm the model
Check the VIN to confirm the model, year and engine.
Measure the wheel and tyre clearance
Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.
Leave travel for normal use
Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.
Set the geometry after the height
Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.
The current Commodore VB-VL 1978-1988 range.
See the controls and hardware in the listed kit.
BCR-ZW-06 is listed for the 1978-1988 Holden Commodore at 6 kg/mm front and 6 kg/mm rear. All have 30-way rebound adjustment.
View BC Racing Commodore VB-VL 1978-1988 kitsFind your Commodore VB-VL 1978-1988 coilovers.
Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.
1 listing
Selected application: All Commodore VB-VL 1978-1988 applications
Match the drivetrain, body style and axle-load limits on the product page before ordering.
![BC Racing Coilovers - Holden Commodore (78-88) [VB-VL]](/images/09cf8cd191b679-480.webp)
BC Racing · BCR-ZW-06
BC Racing Coilovers - Holden Commodore (78-88) [VB-VL]
Check the exact application
All Commodore VB-VL 1978-1988 kit links and part numbers
Before you order.
Identify your car
Send the VIN, model, engine and any earlier changes.
Match the kit
Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.
Check what’s included
Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.
Check your modifications
Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.
Plan fitting
Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.
Questions about Holden Commodore VB-VL 1978-1988 coilovers.
Check the details before choosing your kit.
Does it fit the VN Commodore?
BC lists 1978-1988 cars. Ask before ordering for a VN or later.
Does it fit the wagon?
Tell the supplier the body so BC can confirm.
How low should I set the car?
Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Commodore. Check the alignment at the final height.
When should I book fitting?
Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.
Let’s talk suspension.
Send the Commodore's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.



