Orange Holden Commodore SS VE saloon on dark wheels in a Peak District lay-by

Holden Commodore VE 2006-2013.
The coilover guide.

Shop the coilovers

The VE was sold in the UK as the Vauxhall VXR8. BC lists one kit in three versions; confirm the body and model first.

Which Commodore VE 2006-2013 do you have?1 listed kit · 1 brandReviewed 21 November 2026

Holden Commodore VE history

The VE Commodore was built from 2006 to 2013 on GM's Zeta platform, with V6 and V8 engines. BC lists BCR-ZW-01 for it at 7 kg/mm front and 10 kg/mm rear, in BR RN, ER and ZX versions.

Vauxhall sold the HSV version in the UK as the VXR8.

Holden launched the VE in 2006 as an all-new car on the Zeta platform, which was also used for the Chevrolet Camaro.

Saloon, Sportwagon and ute versions were built, and the SS and HSV models used 6.0- and 6.2-litre V8s. The VF replaced it in 2013.

UK VXR8s are HSV-built cars.

Start with your Commodore VE 2006-2013.

Confirm the chassis, year and existing suspension before choosing your setup.

White Holden Commodore VE on silver wheels on a country lane

Commodore VE saloon

BC lists BCR-ZW-01 for 2006-2013 cars. Give the supplier the VIN, body and engine.

Check my VE
Black Holden VE ute outside a modern workshop

Ute and Sportwagon

Tell the supplier if the car is a ute or Sportwagon, so the rates can be confirmed.

Check my VE ute
Orange Holden Commodore SS VE in a Peak District lay-by

SS, HSV and VXR8

Tell the supplier if the car is an SS, HSV or Vauxhall VXR8.

Check my VXR8

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · BC Racing ZW-01, subject to an application check

BC lists BCR-ZW-01 for the 2006-2013 Holden Commodore VE. Confirm the car first.

Read the buying advice

BCR-ZW-01 is a possible starting point once the supplier has confirmed fitment. It has 30-way rebound adjustment and height set separately from spring preload. Keep the drop modest and include alignment.

  • Confirm the model
  • Keep the drop modest
  • Include alignment
View current configurations

Agree settings and alignment for circuit use.

Read the buying advice

Tell the supplier your tyres and events, agree starting damper settings and a sensible height, and have the alignment set for track use.

  • Describe your events
  • Agree settings
  • Set alignment
Discuss track use for my Commodore

If you are changing wheels too, plan both so the tyres clear the arches.

Read the buying advice

Give the fitter the new wheel and tyre sizes before setting the height. Check clearance through full steering lock and suspension travel, and set the alignment last.

  • Give wheel and tyre sizes
  • Check clearance on lock
  • Set alignment last
Discuss wheels and suspension for my Commodore

Know how the rear works

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Holden Commodore, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

Ask the supplier what each kit supplies at the rear of the Commodore, and whether it keeps a separate rear spring.

Check the rear alignment readings at the final ride height.

Read about ride height and spring preload
Red Holden Commodore VE standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the body and model

Check the VIN to confirm the body, engine and whether the car is an HSV or VXR8.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Commodore VE 2006-2013 range.

See the controls and hardware in the listed kit.

BC Racing

BCR-ZW-01 is listed for the 2006-2013 Holden Commodore VE at 7 kg/mm front and 10 kg/mm rear. All have 30-way rebound adjustment.

View BC Racing Commodore VE 2006-2013 kits

Find your Commodore VE 2006-2013 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

1 listing

Selected application: All Commodore VE 2006-2013 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All Commodore VE 2006-2013 kit links and part numbers

Before you order.

  1. Identify your car

    Send the VIN, body, engine and market.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Holden Commodore VE 2006-2013 coilovers.

Check the details before choosing your kit.

Does it fit the Vauxhall VXR8?

The VE-based VXR8 is related. Confirm with the supplier from the VIN.

Which version should I choose?

BC lists BR RN, ER and ZX versions. Ask BC which suits your car.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Commodore. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Commodore's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.