Red Holden Commodore SS VY saloon on dark wheels in a Peak District lay-by

Holden Commodore VT-VZ 1997-2006.
The coilover guide.

Shop the coilovers

BC lists separate kits for the VT-VZ saloon and for the wagon and ute. Confirm the body first.

Which Commodore VT-VZ 1997-2006 do you have?2 listed kits · 1 brandReviewed 21 November 2026

Holden Commodore VT-VZ history

The VT, VX, VY and VZ Commodores were built from 1997 to 2006, with V6 and V8 engines and the SS as the performance model. BC lists BCR-ZW-02 for the saloon at 7 kg/mm front and rear, and BCR-ZW-03 for the wagon and ute at 7 kg/mm front and 9 kg/mm rear.

UK cars are imports, and the related Monaro has its own guide.

Holden launched the VT in 1997, based on the Opel Omega and enlarged, with independent rear suspension on the saloon.

The VX, VY and VZ updates followed, with the Gen III V8 from 1999. The VE replaced it in 2006.

HSV versions were developed by Holden Special Vehicles.

Start with your Commodore VT-VZ 1997-2006.

Confirm the chassis, year and existing suspension before choosing your setup.

Silver Holden Commodore VT on silver wheels on a country lane

Saloon

BC lists BCR-ZW-02 for the 1997-2006 saloon. Give the supplier the VIN and engine.

Check my Commodore
Yellow Holden VZ ute outside a modern workshop

Wagon and ute

BC lists BCR-ZW-03 for the wagon and ute. Plan the height for the load.

Check my ute
Red Holden Commodore SS VY in a Peak District lay-by

SS and HSV

Tell the supplier if the car is an SS or HSV, so the kit and rates can be confirmed.

Check my SS

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · BC Racing ZW-02, subject to an application check

BC lists BCR-ZW-02 for the 1997-2006 Holden Commodore saloon. Confirm the car first.

Read the buying advice

BCR-ZW-02 is a possible starting point once the supplier has confirmed fitment. It has 30-way rebound adjustment and height set separately from spring preload. Keep the drop modest and include alignment.

  • Confirm the model
  • Keep the drop modest
  • Include alignment
View current configurations
Selected configurationSee optionsinc. VAT · BC Racing ZW-03, subject to an application check

BC lists BCR-ZW-03 for the wagon and ute.

Read the buying advice

The wagon and ute have their own BC reference and a stiffer rear rate. Plan the height for the load and include alignment.

  • Confirm the body
  • Check when loaded
  • Include alignment
View current configurations

If you are changing wheels too, plan both so the tyres clear the arches.

Read the buying advice

Give the fitter the new wheel and tyre sizes before setting the height. Check clearance through full steering lock and suspension travel, and set the alignment last.

  • Give wheel and tyre sizes
  • Check clearance on lock
  • Set alignment last
Discuss wheels and suspension for my Commodore

Know how the rear works

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Holden Commodore, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

Ask the supplier what each kit supplies at the rear of the Commodore, and whether it keeps a separate rear spring.

Check the rear alignment readings at the final ride height.

Read about ride height and spring preload
Blue Holden Commodore VX standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the body

Check the VIN to confirm the model, body and engine.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Commodore VT-VZ 1997-2006 range.

Compare the controls and hardware included in each range.

BC Racing

BCR-ZW-02 is listed for the 1997-2006 Holden Commodore saloon at 7 kg/mm front and 7 kg/mm rear. BCR-ZW-03 is listed for the 1997-2006 Holden Commodore wagon and ute at 7 kg/mm front and 9 kg/mm rear. All have 30-way rebound adjustment.

View BC Racing Commodore VT-VZ 1997-2006 kits

Find your Commodore VT-VZ 1997-2006 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

2 listings

Selected application: All Commodore VT-VZ 1997-2006 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All Commodore VT-VZ 1997-2006 kit links and part numbers

Before you order.

  1. Identify your car

    Send the VIN, model, body and engine.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Holden Commodore VT-VZ 1997-2006 coilovers.

Check the details before choosing your kit.

Which kit fits my car?

BCR-ZW-02 for the saloon and BCR-ZW-03 for the wagon and ute.

Does it fit the Monaro?

The Monaro has its own kit and guide.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Commodore. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Commodore's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.