Black Honda Elysion Prestige MPV on dark wheels on a town street

Honda Elysion 2004-2013.
The coilover guide.

Shop the coilovers

The Elysion is a large eight-seat Japanese MPV. BC and TEIN list kits; plan the height for loads.

Which Elysion 2004-2013 do you have?2 listed kits · 2 brandsReviewed 21 November 2026

Honda Elysion history

Honda built the Elysion from 2004 to 2013, with the V6 Prestige from 2007. BC lists BCR-A-39 at 14 kg/mm front and 12 kg/mm rear, and TEIN lists VSA94-C1AS3 for the RR1 to RR6.

It was not sold new in the UK.

Honda launched the Elysion in 2004 as its largest MPV, with 2.4 and 3.0 V6 engines.

The Prestige added a 3.5 V6 and a large chrome grille from 2007. The RC Odyssey replaced it in Japan in 2013.

Confirm the chassis code and engine.

Start with your Elysion 2004-2013.

Match the model year, drivetrain and body style before comparing brands.

White Honda Elysion on silver wheels on a suburban street

Elysion

BC lists BCR-A-39 and TEIN lists VSA94-C1AS3. Give the supplier the chassis code.

Check my Elysion
Grey Honda Elysion outside a modern workshop

Prestige

TEIN lists the Prestige RR1, RR5 and RR6.

Check my Prestige
Black Honda Elysion Prestige on a town street

Eight seats

Plan the ride height for passengers and luggage.

Check my loaded Elysion

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · BC Racing BCR-A-39, subject to an application check

BC Racing lists BCR-A-39 for the 2004-2013 Elysion. Confirm the chassis code first.

Read the buying advice

Have the supplier confirm fitment from the VIN. Keep the drop modest, check clearance with your wheels and include alignment.

  • Confirm the chassis code
  • Keep the drop modest
  • Include alignment
View current configurations
Selected configurationSee optionsinc. VAT · TEIN VSA94-C1AS3, subject to an application check

TEIN lists VSA94-C1AS3 for the RR1 to RR6, including the Prestige.

Read the buying advice

Confirm the chassis code and keep the drop modest.

  • Confirm the chassis code
  • Keep the drop modest
  • Include alignment
View current configurations

Set the height with the car loaded as it is usually used.

Read the buying advice

Agree a modest height, check it with passengers, luggage or a trailer, and keep enough travel. Set the alignment last.

  • Check height when loaded
  • Keep enough travel
  • Set alignment last
Discuss loads with my Elysion

Know how the rear works

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Honda Elysion, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

Ask the supplier what each kit supplies at the rear of the Elysion, and whether it keeps a separate rear spring.

Check the rear alignment readings at the final ride height.

Read about ride height and spring preload
Silver Honda Elysion standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the version

Check the VIN to confirm the chassis code and engine.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Elysion 2004-2013 range.

Compare the controls and hardware included in each range.

BC Racing

BCR-A-39 is listed for the Honda Elysion (04-13) [RR1/RR6] at 14 kg/mm front and 12 kg/mm rear. All have 30-way rebound adjustment.

View BC Racing Elysion 2004-2013 kits

TEIN

TEIN lists VSA94-C1AS3 (TEIN FLEX Z) for this car. Confirm the exact chassis and version from the listing.

View TEIN Elysion 2004-2013 kits

Find your Elysion 2004-2013 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

2 listings

Selected application: All Elysion 2004-2013 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All Elysion 2004-2013 kit links and part numbers

Before you order.

  1. Identify your car

    Send the chassis code, drive and engine.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Honda Elysion 2004-2013 coilovers.

Check the details before choosing your kit.

Does it fit the Prestige?

TEIN lists the Prestige. Ask BC about its kit.

Does it fit a 4WD car?

Tell the supplier the chassis code so they can confirm.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Elysion. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Elysion's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.