Red 1987 Honda Integra three-door with pop-up headlamps in a Cotswolds lay-by

Honda Integra 1985-1989.
The coilover guide.

Shop the coilovers

The first Integra is now a rare classic. BC Racing lists two kits; confirm the chassis code and check the car's condition first.

Which Integra 1985-1989 do you have?2 listed kits · 1 brandReviewed 21 November 2026

Honda Integra 1985-1989 history

The first Integra was built from 1985 to 1989 as a three- and five-door hatch with pop-up headlamps, and launched the Acura brand in the US. BC lists BCR-A-175 and BCR-A-178 for the DA1 to DA4.

Ask BC which of the two kits suits your car.

Honda launched the Integra in 1985 as a sporty hatchback above the Civic, with a 1.6 twin-cam engine.

In the US it was one of the two launch models of Acura in 1986. The second generation replaced it in 1989.

Survivors are rare, so keep the original parts.

Start with your Integra 1985-1989.

Confirm the chassis, year and existing suspension before choosing your setup.

White 1980s Honda Integra five-door on alloy wheels on a country lane

Integra three- and five-door

BC lists two kits for the DA1 to DA4. Give the supplier the chassis code and ask which suits your car.

Check my Integra
Black 1980s Acura Integra outside a brick classic-car workshop

Acura Integra

US-market Acura Integras share the chassis codes. Confirm the market.

Check my Acura
Red 1987 Honda Integra in a Cotswolds lay-by

Classic condition

Have the mounts and bushes checked before fitting and keep the original parts.

Ask about my classic

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · BC Racing BCR-A-178, subject to an application check

BC Racing lists BCR-A-178 for the 1985-1989 Integra. Confirm the chassis code first.

Read the buying advice

Have the supplier confirm fitment from the VIN. Keep the drop modest, check clearance with your wheels and include alignment.

  • Confirm the chassis code
  • Keep the drop modest
  • Include alignment
View current configurations
Selected configurationSee optionsinc. VAT · BC Racing BCR-A-175, subject to an application check

BC lists BCR-A-175 for the same cars.

Read the buying advice

Ask BC how BCR-A-175 differs from BCR-A-178 before choosing.

  • Compare the two kits
  • Confirm the chassis
  • Include alignment
View current configurations

Have the mounts and bushes checked first, and keep the original parts.

Read the buying advice

Ask a specialist to inspect the suspension mounts, bushes and any rust. Fix problems first, keep the original parts, and set the alignment last.

  • Inspect the mounts
  • Keep original parts
  • Set alignment last
Discuss my Integra

Know how the rear works

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Honda Integra, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

Ask the supplier what each kit supplies at the rear of the Integra, and whether it keeps a separate rear spring.

Check the rear alignment readings at the final ride height.

Read about ride height and spring preload
Silver 1980s Honda Integra standing on its wheels beside an empty two-post lift in a classic-car workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the chassis code

Check the chassis plate to confirm the DA code and market.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Integra 1985-1989 range.

Compare the controls and hardware included in each range.

BC Racing

BCR-A-175 is listed for the Honda Acura Integra FWD (85-89) [DA1-DA4] at rates listed on the product page. BCR-A-178 is listed for the Honda Acura Integra FWD (85-89) [DA1-DA4] at 4 kg/mm front and 3 kg/mm rear. All have 30-way rebound adjustment.

View BC Racing Integra 1985-1989 kits

Find your Integra 1985-1989 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

2 listings

Selected application: All Integra 1985-1989 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All Integra 1985-1989 kit links and part numbers

Before you order.

  1. Identify your car

    Send the chassis code, market and any earlier changes.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Honda Integra 1985-1989 coilovers.

Check the details before choosing your kit.

Which of the two kits do I need?

Ask BC how BCR-A-175 and BCR-A-178 differ for your car.

Does it fit the 1990-on Integra?

No. Later Integras have their own guide.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Integra. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Integra's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.