
Honda Logo 1996-2001.
The coilover guide.
Shop the coiloversThe Logo is a small, rare supermini. BC lists one kit; check its availability first.
Honda Logo history
The Logo was built from 1996 to 2001 and sold in the UK from 1999. BC lists BCR-A-14 at 8 kg/mm front and 5 kg/mm rear, and marks it discontinued.
Confirm availability before planning the work.
Honda launched the Logo in Japan in 1996 as a simple, economical supermini with a 1.3 engine.
It was sold in Europe from 1999. The Jazz replaced it in 2001.
Survivors are rare, so check the car's condition.
Start with your Logo 1996-2001.
Confirm the chassis, year and existing suspension before choosing your setup.



Choose a kit for your car and driving
Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.
BC Racing lists BCR-A-14 for the 1996-2001 Logo. Confirm the chassis code first.
Read the buying advice
Have the supplier confirm fitment from the VIN. Keep the drop modest, check clearance with your wheels and include alignment. BC marks this kit discontinued, so confirm it can be supplied.
- Confirm the chassis code
- Keep the drop modest
- Include alignment
Have the mounts and bushes checked first, and keep the original parts.
Read the buying advice
Ask a specialist to inspect the suspension mounts, bushes and any rust. Fix problems first, keep the original parts, and set the alignment last.
- Inspect the mounts
- Keep original parts
- Set alignment last
If you are changing wheels too, plan both so the tyres clear the arches.
Read the buying advice
Give the fitter the new wheel and tyre sizes before setting the height. Check clearance through full steering lock and suspension travel, and set the alignment last.
- Give wheel and tyre sizes
- Check clearance on lock
- Set alignment last
Know how the rear works
On a standard Honda Logo, the rear spring and shock absorber are mounted separately.
Layout only. Mounts and spring seats vary by kit.Ask the supplier what each kit supplies at the rear of the Logo, and whether it keeps a separate rear spring.
Check the rear alignment readings at the final ride height.
Read about ride height and spring preload
Plan the fitting before the car arrives
Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.
Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.
Confirm the version
Check the VIN to confirm the model and year.
Measure the wheel and tyre clearance
Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.
Leave travel for normal use
Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.
Set the geometry after the height
Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.
The current Logo 1996-2001 range.
See the controls and hardware in the listed kit.
BCR-A-14 is listed for the Honda Logo (Discontinued) (96-01) [GA3/GA5] at 8 kg/mm front and 5 kg/mm rear. All have 30-way rebound adjustment.
View BC Racing Logo 1996-2001 kitsFind your Logo 1996-2001 coilovers.
Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.
1 listing
Selected application: All Logo 1996-2001 applications
Match the drivetrain, body style and axle-load limits on the product page before ordering.
![BC Racing Coilovers - Honda Logo (Discontinued) (96-01) [GA3/GA5]](/images/9c1ba2358f3b4e-480.webp)
BC Racing · BCR-A-14
BC Racing Coilovers - Honda Logo (Discontinued) (96-01) [GA3/GA5]
Check the exact application
All Logo 1996-2001 kit links and part numbers
Before you order.
Identify your car
Send the VIN, year and engine.
Match the kit
Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.
Check what’s included
Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.
Check your modifications
Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.
Plan fitting
Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.
Questions about Honda Logo 1996-2001 coilovers.
Check the details before choosing your kit.
Is the kit still available?
BC marks it discontinued. Ask before ordering.
Does a Jazz kit fit?
No. The Jazz is a different car.
How low should I set the car?
Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Logo. Check the alignment at the final height.
When should I book fitting?
Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.
Let’s talk suspension.
Send the Logo's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.



