Opalescent Silver Blue 1963 Jaguar E-Type fixed-head coupe in a Cotswolds lay-by

Jaguar E-Type 1961-1975.
The coilover guide.

Shop the coilovers

The E-Type is a valuable classic. Nitron lists an R1 kit; agree the specification with Nitron and keep the originals.

Which E-Type 1961-1975 do you have?1 listed kit · 1 brandReviewed 21 November 2026

Jaguar E-Type history

Jaguar built the E-Type from 1961 to 1975 in Series 1, 2 and 3 form, as a roadster, fixed-head coupe and 2+2. Nitron lists an R1 single-adjustable kit for it.

Keep the original parts with the car.

Jaguar launched the E-Type at Geneva in 1961 with a 3.8 straight-six, torsion-bar front suspension and independent rear suspension.

The 4.2 arrived in 1964 and the Series 3 V12 in 1971. Production ended in 1975.

Have a specialist check the car before changing the suspension.

Start with your E-Type 1961-1975.

Confirm the chassis, year and existing suspension before choosing your setup.

Red Jaguar E-Type roadster on wire wheels on a country lane

Roadster and coupe

Nitron lists an R1 kit for the E-Type. Tell Nitron the series and body.

Ask about my E-Type
British Racing Green Jaguar E-Type outside a brick classic-car workshop

Series 1, 2 or 3

Tell Nitron the series and engine.

Ask about my series
Opalescent Silver Blue Jaguar E-Type in a Cotswolds lay-by

Valuable classic

Keep the original parts and have a specialist fit the kit.

Ask about fitting

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Nitron lists an R1 kit for the E-Type. Agree the specification with Nitron.

Read the buying advice

R1 has one combined damping adjuster. Agree rates, valving and ride height with Nitron, and confirm delivery timing.

  • Confirm the model
  • Agree rates and valving
  • Confirm delivery timing
Discuss a Nitron kit for my E-Type

Have the mounts and bushes checked first, and keep the original parts.

Read the buying advice

Ask a specialist to inspect the suspension mounts, bushes and any rust. Fix problems first, keep the original parts, and set the alignment last.

  • Inspect the mounts
  • Keep original parts
  • Set alignment last
Discuss my E-Type

If you are changing wheels too, plan both so the tyres clear the arches.

Read the buying advice

Give the fitter the new wheel and tyre sizes before setting the height. Check clearance through full steering lock and suspension travel, and set the alignment last.

  • Give wheel and tyre sizes
  • Check clearance on lock
  • Set alignment last
Discuss wheels and suspension for my E-Type

Know how the rear works

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Jaguar E-Type, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

Ask the supplier what each kit supplies at the rear of the E-Type, and whether it keeps a separate rear spring.

Check the rear alignment readings at the final ride height.

Read about ride height and spring preload
White Jaguar E-Type standing on its wheels beside an empty two-post lift in a classic-car workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the series

Tell Nitron the series, engine and body before ordering.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current E-Type 1961-1975 range.

See the controls and hardware in the listed kit.

Nitron

Nitron lists NTCJG010R1 for this car. R1 has a combined damping adjuster; R3 has separate rebound and compression controls. They are supplied to order.

View Nitron E-Type 1961-1975 kits

Find your E-Type 1961-1975 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

1 listing

Selected application: All E-Type 1961-1975 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All E-Type 1961-1975 kit links and part numbers

Before you order.

  1. Identify your car

    Send the chassis number, series, body and how the car is used.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Jaguar E-Type 1961-1975 coilovers.

Check the details before choosing your kit.

Is it priced on the site?

Nitron kits are specified to order, so ask for a quote.

Should I keep the original parts?

Yes. Keep them with the car.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every E-Type. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the E-Type's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.