Yellow Lamborghini Gallardo on dark wheels in a Yorkshire Dales lay-by

Lamborghini Gallardo 2003-2013.
The coilover guide.

Shop the coilovers

The Gallardo is a mid-engined V10 supercar. Nitron lists R1, R3 and elec-TRON kits, with or without a lift system for the front.

Which Gallardo 2003-2013 do you have?13 listed kits · 2 brandsReviewed 21 November 2026

Lamborghini Gallardo history

Lamborghini built the Gallardo from 2003 to 2013 as a coupe and Spyder with a V10 and four-wheel drive. Nitron lists R1 and R3 kits and elec-TRON versions with electronically controlled damping, each with or without a front axle lift or lift cylinders.

All are built to order, so agree the specification with Nitron.

Lamborghini launched the Gallardo in 2003 under Audi ownership, with a 5.0 V10.

The LP560-4 of 2008 brought a 5.2 V10 and direct injection. The Superleggera, Spyder and rear-drive LP550-2 followed. The Huracan replaced it in 2014.

Keep the original parts with the car.

Start with your Gallardo 2003-2013.

Match the model year, drivetrain and body style before comparing brands.

White Lamborghini Gallardo Spyder on silver wheels on a country lane

Gallardo

Nitron lists R1 and R3 kits. Tell Nitron the version and how the car is used.

Ask about my Gallardo
Orange Lamborghini Gallardo Superleggera in a circuit paddock

Superleggera and track

Nitron's R3 and elec-TRON R3 kits suit track use. Agree settings with Nitron.

Ask about track use
Yellow Lamborghini Gallardo in a Yorkshire Dales lay-by

Front axle lift

Nitron offers a front axle lift or lift cylinders for ramps and kerbs.

Ask about a lift system

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Nitron lists R1 and R3 kits for the Gallardo. Agree the specification with Nitron.

Read the buying advice

R1 has one combined damping adjuster; R3 sets rebound and both compression speeds separately. Some kits add a front axle lift for ramps and kerbs. Agree rates and valving, and confirm delivery timing, as the kits are built to order.

  • Confirm the application
  • Agree rates and valving
  • Confirm delivery timing
Discuss a Nitron kit for my Gallardo

Nitron lists elec-TRON R1 and R3 kits for the Gallardo, with electronically controlled damping.

Read the buying advice

elec-TRON lets the damping be changed electronically. Agree the specification, control and delivery timing with Nitron.

  • Confirm the version
  • Agree the control set-up
  • Confirm delivery timing
Discuss a Nitron elec-TRON kit for my Gallardo
Selected configurationSee optionsinc. VAT · AST ACU-A4001S, subject to an application check

AST lists ACU-A4001S, a 5100 Street kit, for the Gallardo and Gallardo Spyder.

Read the buying advice

AST also lists it for the related Audi R8 V10. Confirm the version and agree settings with the supplier.

  • Confirm the version
  • Agree settings
  • Confirm lead time
View current configurations

Know how the rear works

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Lamborghini Gallardo, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

Ask the supplier what each kit supplies at the rear of the Gallardo, and whether it keeps a separate rear spring.

Check the rear alignment readings at the final ride height.

Read about ride height and spring preload
Black Lamborghini Gallardo standing on its wheels beside an empty two-post lift in a motorsport workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the version

Tell Nitron the year, version and whether the car has a factory lift system.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Gallardo 2003-2013 range.

Compare the controls and hardware included in each range.

AST

AST lists ACU-A4001S (AST 5100) for this car. Confirm the exact chassis and version from the listing.

View AST Gallardo 2003-2013 kits

Nitron

Nitron lists NTCLA010ER1, NTCLA010ER1+CYL, NTCLA010ER1+FAL, NTCLA010ER3, NTCLA010ER3+CYL, NTCLA010ER3+FAL, NTCLA010R1, NTCLA010R1+CYL, NTCLA010R1+FAL, NTCLA010R3, NTCLA010R3+CYL, NTCLA010R3+FAL for this car. R1 has a combined damping adjuster; R3 has separate rebound and compression controls. They are supplied to order.

View Nitron Gallardo 2003-2013 kits

Find your Gallardo 2003-2013 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

13 listings

Selected application: All Gallardo 2003-2013 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

6 of 13 shown
All Gallardo 2003-2013 kit links and part numbers

Before you order.

  1. Identify your car

    Send the VIN, version and how the car is used.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Lamborghini Gallardo 2003-2013 coilovers.

Check the details before choosing your kit.

Is it priced on the site?

Nitron kits are specified to order, so ask for a quote.

Can I keep a front lift?

Nitron offers kits with a front axle lift or lift cylinders.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Gallardo. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Gallardo's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.