Yellow Lotus Exige S1 in a Peak District lay-by

Lotus Exige S1 2000-2001.
The coilover guide.

Shop the coilovers

The S1 Exige is a hard-top track version of the S1 Elise. Nitron lists road, track and race kits.

Which Exige S1 2000-2001 do you have?3 listed kits · 1 brandReviewed 21 November 2026

Lotus Exige S1 history

Lotus built the Exige S1 from 2000 to 2001 with a Rover K-series engine, a roof scoop and a large rear wing. Nitron lists R1 FastRoad, R1 ClubSport and RacePro 3 kits.

Keep the original parts with the car.

The S1 Exige was launched in 2000, based on the Elise Sport 190 racer.

Around 600 were built. The S2 Exige followed in 2004.

Have a Lotus specialist fit the kit.

Start with your Exige S1 2000-2001.

Confirm the chassis, year and existing suspension before choosing your setup.

Silver Lotus Exige S1 on a country lane

Road use

Nitron's R1 FastRoad kit suits road driving.

Ask about FastRoad
Green Lotus Exige S1 in a circuit paddock

Track days

R1 ClubSport and RacePro 3 suit track use.

Ask about track kits
Yellow Lotus Exige S1 in a Peak District lay-by

Rare car

Keep the original parts.

Ask about my S1

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Nitron lists R1 FastRoad, R1 ClubSport and RacePro 3 kits for the Exige S1. Agree the specification with Nitron.

Read the buying advice

R1 FastRoad suits road use, and R1 ClubSport is firmer for track days. RacePro 3 and CupSport 3 are three-way kits with separate rebound and compression adjustment. Agree rates, valving and ride height, and confirm delivery timing, as the kits are built to order.

  • Confirm the model
  • Agree rates and valving
  • Confirm delivery timing
Discuss a Nitron kit for my Exige S1

Agree settings and alignment for circuit use.

Read the buying advice

Tell the supplier your tyres and events, agree starting damper settings and a sensible height, and have the alignment set for track use.

  • Describe your events
  • Agree settings
  • Set alignment
Discuss track use for my Exige

Have the mounts and bushes checked first, and keep the original parts.

Read the buying advice

Ask a specialist to inspect the suspension mounts, bushes and any rust. Fix problems first, keep the original parts, and set the alignment last.

  • Inspect the mounts
  • Keep original parts
  • Set alignment last
Discuss my Exige

Know how the rear works

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Lotus Exige, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

Ask the supplier what each kit supplies at the rear of the Exige, and whether it keeps a separate rear spring.

Check the rear alignment readings at the final ride height.

Read about ride height and spring preload
Blue Lotus Exige S1 standing on its wheels beside an empty two-post lift in a motorsport workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the model

Tell Nitron the chassis number to confirm an S1.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Exige S1 2000-2001 range.

Compare the controls and hardware included in each range.

Nitron

Nitron lists NTCLO011_CS, NTCLO011_FR, NTCLO011_RP3 for this car. R1 has a combined damping adjuster; R3 has separate rebound and compression controls. They are supplied to order.

View Nitron Exige S1 2000-2001 kits

Find your Exige S1 2000-2001 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

3 listings

Selected application: All Exige S1 2000-2001 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All Exige S1 2000-2001 kit links and part numbers

Before you order.

  1. Identify your car

    Send the chassis number and how the car is used.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Lotus Exige S1 2000-2001 coilovers.

Check the details before choosing your kit.

Is it priced on the site?

Nitron kits are specified to order, so ask for a quote.

Does it fit the S2 Exige?

No. The S2 has its own guide.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Exige. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Exige's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.