Ventura Orange McLaren 570S in a Yorkshire Dales lay-by

McLaren 540C, 570S and 600LT.
The coilover guide.

Shop the coilovers

The Sports Series McLarens share a carbon tub and twin-turbo V8. Nitron lists RoadSport kits, with or without a front lift.

Which 540C, 570S and 600LT do you have?6 listed kits · 1 brandReviewed 21 November 2026

McLaren Sports Series history

McLaren built the Sports Series from 2015 to 2021 as the 540C, 570S, 570GT, 570S Spider and 600LT. Nitron lists RoadSport and three-way RoadSport 3 kits, with a front axle lift or lift cylinders as options.

All are built to order.

McLaren launched the 570S and 540C in 2015 as its entry range, with a carbon MonoCell II tub and 3.8 twin-turbo V8.

The 570GT, Spider and track-focused 600LT followed. The Artura replaced them in 2021.

Agree settings for road or track use.

Start with your 540C, 570S and 600LT.

Confirm the chassis, year and existing suspension before choosing your setup.

White McLaren 570GT on a country lane

570S and 570GT

Nitron's RoadSport kit suits road driving.

Ask about my 570S
Green McLaren 600LT in a circuit paddock

600LT and track

RoadSport 3 adds three-way adjustment for track use.

Ask about RoadSport 3
Ventura Orange McLaren 570S in a Yorkshire Dales lay-by

Front lift

Nitron offers kits with a front axle lift or lift cylinders.

Ask about a lift

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Nitron lists RoadSport and RoadSport 3 kits for the 540C, 570 and 600LT.

Read the buying advice

RoadSport suits road use, and RoadSport 3 adds separate rebound and compression adjustment for track days. Kits can include a front axle lift or lift cylinders. Agree the specification and delivery timing with Nitron.

  • Confirm the model
  • Agree rates and valving
  • Confirm delivery timing
Discuss a Nitron kit for my McLaren

Agree settings and alignment for circuit use.

Read the buying advice

Tell the supplier your tyres and events, agree starting damper settings and a sensible height, and have the alignment set for track use.

  • Describe your events
  • Agree settings
  • Set alignment
Discuss track use for my 570S

Have the mounts and bushes checked first, and keep the original parts.

Read the buying advice

Ask a specialist to inspect the suspension mounts, bushes and any rust. Fix problems first, keep the original parts, and set the alignment last.

  • Inspect the mounts
  • Keep original parts
  • Set alignment last
Discuss my 570S

Know how the rear works

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard McLaren 570S, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

Ask the supplier what each kit supplies at the rear of the 570S, and whether it keeps a separate rear spring.

Check the rear alignment readings at the final ride height.

Read about ride height and spring preload
Black McLaren 570S standing on its wheels beside an empty two-post lift in a motorsport workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the model

Tell Nitron the model, year and whether the car has a front lift.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current 540C, 570S and 600LT range.

Compare the controls and hardware included in each range.

Nitron

Nitron lists NTCMC010RS, NTCMC010RS+CYL, NTCMC010RS+FAL, NTCMC010RS3, NTCMC010RS3+CYL, NTCMC010RS3+FAL for this car. R1 has a combined damping adjuster; R3 has separate rebound and compression controls. They are supplied to order.

View Nitron 540C, 570S and 600LT kits

Find your 540C, 570S and 600LT coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

6 listings

Selected application: All 540C, 570S and 600LT applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All 540C, 570S and 600LT kit links and part numbers

Before you order.

  1. Identify your car

    Send the VIN, model and how the car is used.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about McLaren 540C, 570S and 600LT coilovers.

Check the details before choosing your kit.

Is it priced on the site?

Nitron kits are specified to order, so ask for a quote.

Can I keep a front lift?

Nitron offers kits with a front axle lift or lift cylinders.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every 570S. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the 570S's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.