Trophy Blue MG ZS saloon with rear wing in a Cotswolds lay-by

MG MG ZS 2001-2005.
The coilover guide.

Shop the coilovers

The MG ZS is the sporty version of the Rover 45. SPAX lists an RSX kit for four-cylinder cars.

Which MG ZS 2001-2005 do you have?1 listed kit · 1 brandReviewed 21 November 2026

MG ZS history

MG Rover built the ZS from 2001 to 2005 as a saloon and hatchback based on the Rover 45, with 1.6, 1.8, 2.0 diesel and 2.5 V6 engines. SPAX lists RSX573 for the 1.6 and 1.8, not the V6.

It was sold new in the UK.

MG Rover launched the ZS in 2001 as part of its Z range of sporty models, alongside the ZR and ZT.

The ZS 180 V6 won praise for its handling and raced in the BTCC. Production ended when MG Rover closed in 2005.

Check the car's condition before fitting.

Start with your MG ZS 2001-2005.

Confirm the chassis, year and existing suspension before choosing your setup.

Silver MG ZS hatchback on a country lane

ZS 1.6 and 1.8

SPAX lists RSX573 for four-cylinder cars.

Check my ZS
Red MG ZS outside a brick workshop

Older car

Have the mounts and bushes checked first.

Ask about my ZS
Trophy Blue MG ZS in a Cotswolds lay-by

ZS 180 V6

SPAX lists the four-cylinder cars. Ask before ordering for the V6.

Check my ZS 180

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · SPAX RSX573, subject to an application check

SPAX lists RSX573 for the MG ZS 1.6 and 1.8 and the Rover 45 and 400.

Read the buying advice

Confirm the engine before ordering. Keep the drop modest and include alignment.

  • Confirm the engine
  • Keep the drop modest
  • Include alignment
View current configurations

Have the mounts and bushes checked first, and keep the original parts.

Read the buying advice

Ask a specialist to inspect the suspension mounts, bushes and any rust. Fix problems first, keep the original parts, and set the alignment last.

  • Inspect the mounts
  • Keep original parts
  • Set alignment last
Discuss my ZS

If you are changing wheels too, plan both so the tyres clear the arches.

Read the buying advice

Give the fitter the new wheel and tyre sizes before setting the height. Check clearance through full steering lock and suspension travel, and set the alignment last.

  • Give wheel and tyre sizes
  • Check clearance on lock
  • Set alignment last
Discuss wheels and suspension for my ZS

Know how the rear works

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard MG ZS, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

Ask the supplier what each kit supplies at the rear of the ZS, and whether it keeps a separate rear spring.

Check the rear alignment readings at the final ride height.

Read about ride height and spring preload
Black MG ZS standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the version

Check the VIN to confirm the engine and body.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current MG ZS 2001-2005 range.

See the controls and hardware in the listed kit.

SPAX

SPAX lists RSX573 (SPAX RSX) for this car. Confirm the exact chassis and version from the listing.

View SPAX MG ZS 2001-2005 kits

Find your MG ZS 2001-2005 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

1 listing

Selected application: All MG ZS 2001-2005 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All MG ZS 2001-2005 kit links and part numbers

Before you order.

  1. Identify your car

    Send the VIN, engine and body.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about MG MG ZS 2001-2005 coilovers.

Check the details before choosing your kit.

Does it fit the ZS 180 V6?

No. SPAX lists the four-cylinder cars.

Does it fit the Rover 45?

Yes. SPAX lists the Rover 45 and 400 too.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every ZS. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the ZS's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.