Almond Green classic Mini Cooper with a white roof in a Cotswolds lay-by

MINI Classic Mini 1959-2000.
The coilover guide.

Shop the coilovers

The classic Mini uses rubber cone springs. SPAX lists adjustable damper kits for cars without Hydrolastic suspension.

Which Classic Mini 1959-2000 do you have?5 listed kits · 1 brandReviewed 21 November 2026

Classic Mini history

The original Mini was built from 1959 to 2000. Most cars use rubber cone springs; some 1964-1971 cars have Hydrolastic. SPAX lists RSX516 to RSX520 for cars without Hydrolastic, standard or lowered.

These are adjustable damper kits rather than full coilovers.

Alec Issigonis designed the Mini, launched by BMC in 1959.

Hydrolastic suspension was used on many cars from 1964 to 1971, then rubber cones returned.

Check which suspension your car has.

Start with your Classic Mini 1959-2000.

Confirm the chassis, year and existing suspension before choosing your setup.

Red classic Mini on a country lane

Standard height

SPAX lists RSX519 complete kits for standard height. Check the suspension type.

Check my Mini
British Racing Green classic Mini Cooper outside a brick workshop

Lowered cars

SPAX lists RSX520 for lowered cars.

Check my lowered Mini
Almond Green classic Mini Cooper in a Cotswolds lay-by

Hydrolastic cars

SPAX lists cars without Hydrolastic. Ask before ordering for a Hydrolastic car.

Ask about Hydrolastic

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · SPAX RSX519, subject to an application check

SPAX lists RSX519 for the classic Mini without Hydrolastic. SPAX kits have externally adjustable damping.

Read the buying advice

Confirm the build date and version, keep the drop modest and include alignment.

  • Confirm the build date
  • Keep the drop modest
  • Include alignment
View current configurations
Selected configurationSee optionsinc. VAT · SPAX RSX520, subject to an application check

SPAX lists RSX520 for the lowered classic Mini without Hydrolastic. SPAX kits have externally adjustable damping.

Read the buying advice

Confirm the build date and version, keep the drop modest and include alignment.

  • Confirm the build date
  • Keep the drop modest
  • Include alignment
View current configurations

Have the mounts and bushes checked first, and keep the original parts.

Read the buying advice

Ask a specialist to inspect the suspension mounts, bushes and any rust. Fix problems first, keep the original parts, and set the alignment last.

  • Inspect the mounts
  • Keep original parts
  • Set alignment last
Discuss my classic Mini

Know how the rear works

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard MINI Classic Mini, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

Ask the supplier what each kit supplies at the rear of the Classic Mini, and whether it keeps a separate rear spring.

Check the rear alignment readings at the final ride height.

Read about ride height and spring preload
White classic Mini standing on its wheels beside an empty two-post lift in a classic-car workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the version

Check the VIN to confirm whether the car has rubber cone or Hydrolastic suspension.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Classic Mini 1959-2000 range.

Compare the controls and hardware included in each range.

SPAX

SPAX lists RSX519 (SPAX RSX), RSX520 (SPAX RSX), RSX516 (SPAX RSX), RSX517 (SPAX RSX) and RSX518 (SPAX RSX) for this car. Confirm the exact chassis and version from the listing.

View SPAX Classic Mini 1959-2000 kits

Find your Classic Mini 1959-2000 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

5 listings

Selected application: All Classic Mini 1959-2000 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All Classic Mini 1959-2000 kit links and part numbers

Before you order.

  1. Identify your car

    Send the year, model and suspension type.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about MINI Classic Mini 1959-2000 coilovers.

Check the details before choosing your kit.

Does it fit a Hydrolastic car?

No. SPAX lists cars without Hydrolastic.

Are these full coilovers?

No. They are adjustable damper kits for the rubber cone suspension.

Can I buy front or rear only?

Yes. SPAX lists front, rear and complete kits.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Classic Mini. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Classic Mini's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.