
BMW E63 / E64.
The coilover guide.
Shop the coiloversStart with the kit your E63 Coupé, E64 Convertible or M6 needs, then decide how low to go. Check the original dampers, supplied mounts and wheel clearance before settling on a ride height.
Identify your model and the suspension fitted
If your 6 Series rides poorly, have the dampers, mounts and suspension joints checked before deciding how much to lower it. Worn parts still need attention when fitting a new kit. Leave enough clearance for the roads you use and the passengers or luggage you normally carry.
BC lists I-52 for the general E63/E64 range and I-19 separately for the M6. The I-52 listing has BR RS and inverted-front RM MA options. Send GSM the exact model, build date and factory suspension details so they can check which complete kit suits your car before you order.
E63 is the Coupé and E64 the soft-top Convertible in this 6 Series generation. BMW launched the 645Ci Coupé and Convertible in the UK in March 2004. With later engines and the 2007 update, the full model and build date help identify the right kit. The F06 Gran Coupé and F12/F13 generation need separate fitment checks.
The Convertible has extra body reinforcement and a different roof structure, so use its own axle ratings and normal load when agreeing the setup. The M6 has its own chassis tuning and factory Electronic Damper Control. Even within this generation, the mounts and any electronic work need checking for the exact version.
The Sport button on the launch-era non-M6 car operated Driving Dynamics Control, changing throttle, steering and, where applicable, gearbox responses. This differs from the M6's Electronic Damper Control. Check the dampers and other chassis equipment actually fitted, including Dynamic Drive or Active Steering where present. The button or badge alone is not enough to choose the kit.
Start with your E63 / E64.
Confirm the chassis, year and existing suspension before choosing your setup.

E63 Coupé, other than M6
BC lists I-52 for the 2003–2010 E63/E64 6 Series. Send GSM the full model and engine, build date, original market and axle ratings. Ask them to confirm the BR RS or RM MA option, its mounts and any work needed for the suspension already on your car.
Check my E63 Coupé
E64 Convertible, other than M6
Tell GSM you have a Convertible when asking about I-52, and include the exact engine, axle ratings and usual load. Have the spring and damper specification, supplied mounts and usable ride-height range checked for your car. A Coupé's ride height is not a setting to copy onto your Convertible.
Check my E64 Convertible
M6 Coupé and Convertible
I-19 is BC's separate E63/E64 M6 reference; its application list names both Coupé and Cabrio. The current shop kit is BR RN. Give GSM the body style and build date, confirm which front mounts must be retained, and agree how the factory EDC system will be handled. I-19 and I-52 are not interchangeable simply because they share a generation.
Check my M6 and EDC
Factory controls, imports and altered cars
Check the build specification against the parts actually fitted, including the factory dampers, Dynamic Drive, Active Steering and any previous suspension changes. Ask which functions will remain and what extra parts or work the replacement kit needs. A Sport button or M Sport trim does not identify all the equipment on the car.
Check my original suspensionWhat do you want
from the car?
Choose advice for everyday driving, occasional circuit days or a dedicated track project.
Once I-52 is confirmed for your car, discuss the BR RS option with rubber top mounts.
Read the buying advice
Tell the fitter what bothers you about the current ride and how much lower you want the car to sit. BR has one damping control that changes compression and rebound together. Agree the spring specification and supplied mounts, then choose a ride height that leaves enough travel and clearance for speed humps, your driveway and the load you normally carry. Include an inspection of worn joints and mounts in the quote.
- Check I-52 suits your exact car
- Leave enough travel and clearance
- Allow for worn parts and alignment
Once I-52 is confirmed for your car, compare RM MA's inverted front dampers with the BR RS option.
Read the buying advice
RM MA has inverted front dampers. Ask which front mounts and rear assemblies are supplied, and agree the spring and damper specification for your tyres and use. BR and RM both adjust compression and rebound together. If you change wheels and tyres for circuit days, provide the details of both sets. Agree inspection and servicing needs before choosing the kit.
- Compare the front damper assemblies
- Provide details of both wheel and tyre sets
- Plan inspections and servicing
Give the builder the completed car's weight, tyres and chassis details.
Read the buying advice
For an E63, E64 or M6 built for circuit use, base the suspension specification on its actual weight and equipment. Include altered mounts, aero and any brake or wheel changes. Check the permitted hardware and safety requirements for the intended event, especially with a Convertible. The M6's EDC requirements and kit reference still need checking. Neither catalogue entry provides a competition setup on its own.
- Measure the completed car
- Confirm mounts and electronic work
- Check the intended event's rules
The rear spring sits around the damper
The rear spring surrounds the damper on a standard E63 645Ci.
Component layout only. Mounts, dimensions and adjusters vary by kit.BMW's parts drawings for the E63 645Ci and M6 show the rear coil spring around the damper. The M6 drawing also identifies its EDC control unit and sensors. The illustration shows this spring-and-damper layout. It does not show the mounts or dimensions supplied in a BC kit.
Before fitting, confirm what the complete rear assemblies include, which mounts are retained and what work the original damping system needs. BMW's M6 technical material describes spring-strut tuning and length specific to that model. A connection to the E60 M5, or a similar-looking assembly, is not enough to choose a replacement.
Set the ride height within the exact kit's usable range. Have clearance checked as the suspension moves, with the load you normally carry. Once the height is set, have the alignment measured and adjusted, along with any required steering or sensor checks.
Understand height and spring preload
Include fitting and setup in the quote
Ask the workshop to inspect the original dampers, top mounts, suspension arms, bushes and joints before finalising the kit. Identify the factory controls and any previous modifications. Confirm which parts are supplied and which must be retained, including the front mounts for the BR RN M6 kit. Price any required electronic work before the car is dismantled.
Provide wheel widths, offsets, tyre sizes and spacer details. Have clearance to the suspension, arches and liners checked as the steering and suspension move. Include height setting, alignment, any required steering or sensor procedures and follow-up checks in the fitting quote.
Original damping and chassis controls
Identify EDC, Dynamic Drive and Active Steering where fitted, then agree what the replacement kit needs. Ask separately how any warning lights will be handled and whether electronic damping will remain. Confirm which functions will work after fitting.
Wheels, tyres and spacers
Provide the actual wheel widths, offsets and tyre sizes. Have clearance to the damper, arch and liner checked as the suspension moves. Include details of both road and circuit wheels and the load you normally carry.
Mounts, bushes and joints
Have worn components inspected as part of the coilover work. Check what the chosen kit includes and which original mounts or bearings must be retained or replaced. Ask for the complete parts list; the configuration name alone does not give you that.
Height, axle ratings and alignment
Supply the car's permitted axle ratings and details of any previous lowering. Ask for the exact kit's usable ride-height range and the starting height used for any quoted drop. Set the height before final alignment and any required steering or sensor checks.
The current E63 / E64 range.
Compare the controls and hardware included in each range.
The I-52 listing has BR RS and inverted-front RM MA options. The M6 has a separate I-19 BR RN kit. The current shop descriptions list nominal front/rear spring rates of 6/4.5 kg/mm; confirm the rates and supplied mounts for the kit you order. BR and RM damping controls change compression and rebound together. Choose the specification for your car and how you use it. Shared spring rates do not make I-52 and I-19 interchangeable or tell you how comfortable the ride will be.
View BC Racing E63 / E64 kitsFind your E63 / E64 coilovers.
Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.
2 listings
Selected application: All E63 / E64 applications
Match the drivetrain, body style and axle-load limits on the product page before ordering.
![BC Racing Coilovers - BMW 6 Series Coupe (05-10) [E63/E64 (M6)]](/images/09cf8cd191b679-480.webp)
BC Racing · BCR-I-19
BC Racing Coilovers - BMW 6 Series Coupe (05-10) [E63/E64 (M6)]
Check the exact application
![BC Racing Coilovers - BMW 6 Series (03-10) [E63/E64]](/images/09cf8cd191b679-480.webp)
BC Racing · BCR-I-52
BC Racing Coilovers - BMW 6 Series (03-10) [E63/E64]
Check the exact application
All E63 / E64 kit links and part numbers
Before you order.
Identify your car
Send the full model, engine, build date and original market. State whether it is an E63 Coupé or E64 Convertible, and whether it is an M6.
Match the kit
Provide the permitted axle ratings and details of the original dampers and other chassis options. Include any previous suspension or mount changes.
Check what’s included
Have the complete kit and chosen configuration checked for your car, including the spring specification, supplied assemblies, retained mounts and any electrical work.
Check your modifications
Provide wheel widths, offsets, tyre sizes and spacer details. Have clearance checked as the steering and suspension move at the intended ride height.
Plan fitting
Check availability before booking the job. Include height setting, alignment, any required steering or sensor checks and follow-up work in the quote.
Questions about BMW E63 / E64 coilovers.
Check the details before choosing your kit.
Do the M6 and other E63/E64 models use the same BC reference?
BC lists I-52 for the E63/E64 6 Series and I-19 separately for the M6 Coupé and Cabrio. Have the full kit reference checked against your exact model, body style and original suspension. The shared chassis generation does not make I-52 and I-19 interchangeable.
Can I use a Coupé's setup on my E64 Convertible?
Use the Convertible's own axle ratings and normal load when agreeing its kit, spring specification and ride height. Its reinforced body and roof structure differ from the Coupé. BC names E63/E64 in its application list, but the listing does not give one height or spring setting for every body and engine.
Does the Sport button mean my car has electronic dampers?
The Sport button on the launch-era non-M6 car operated Driving Dynamics Control, changing throttle, steering and gearbox responses where applicable. It did not identify the M6's Electronic Damper Control system. Check the build specification against the dampers actually fitted before choosing a replacement.
Will the M6 kit retain factory Electronic Damper Control?
Ask how the exact replacement will handle the factory EDC system and which functions will remain. The current BR RN listing does not confirm that it will retain electronic damping or identify every extra part or procedure needed. Have the kit and retained mounts checked for your exact car before ordering.
Are BR RS and RM MA just different top mounts?
The I-52 RM MA option has inverted front dampers, so the front construction differs too. Check the front mounts and rear assemblies supplied with each option. BR and RM damping controls change compression and rebound together. Compare the full specification for your car and how you use it.
Are the listed spring rates enough to choose the kit?
The shop descriptions list nominal front/rear spring rates of 6/4.5 kg/mm. Confirm the rates for the kit you order alongside your car's axle ratings, body style and intended use. The numbers alone do not tell you how comfortable the ride will be, whether the damping suits the car or whether I-52 and the M6 kit are interchangeable.
Do these listings cover an F06, F12 or F13 6 Series?
The two entries here are for E63/E64. Have a separate kit confirmed for the F06 Gran Coupé, F12 Convertible or F13 Coupé. The 6 Series or M6 badge alone is not enough to choose one.
How low should I set my E63 or E64?
Choose a height within the exact kit's confirmed usable range, leaving clearance for your roads and the load you normally carry. Have the fitter check wheel clearance and suspension travel before final alignment and any required steering or sensor checks. Agree the setting from measurements of your car.
Let’s talk suspension.
Send GSM your 6 Series model, body style and build details, plus a description of the suspension currently fitted. Include the wheel and tyre specification so they can check the kit, chosen configuration and fitting work for your car.



