Midnight-blue BMW F01 saloon outside a stone workshop

BMW F01 / F02.
The coilover guide.

Shop the coilovers

For an F01 without air suspension, discuss BC's I-73. For an F02 Li, I-93 is an air-to-coil conversion. AST separately lists selected F01 models and omits rear springs. Have the actual suspension, complete parts and retained functions confirmed before comparing fitted quotes.

Which F01 / F02 do you have?3 listed kits · 2 brandsReviewed 18 November 2026

Identify the rear suspension on your car

If the car rides poorly or sits unevenly, have the dampers, mounts, suspension joints and any rear air system inspected before deciding how much to lower it. Give the fitter your normal passenger and luggage load, wheel and tyre details, and the roads you use. Agree a usable height and the required parts from those details.

Send GSM the full model, build date, original market and permitted axle ratings, with the suspension actually fitted. BC's F01 listing excludes air, its F02 listing is a conversion, and AST's rear contents need clarification. Each route needs its own parts list and fitting quote, including the work on electronic damping, self-levelling and any other affected chassis functions.

F01 and the long-wheelbase F02 belong to this 7 Series generation, but the body code does not identify every suspension component. BMW's early technical training describes steel springs on the standard F01 and rear air suspension on the F02. It also identifies rear air suspension as an option on F01, so even an early car needs its actual equipment checked.

BMW's 2012 update presentation describes self-levelling rear air suspension. Check the build specification, original market and parts now fitted; the model year alone is not enough to choose a steel-spring or air-suspension replacement. Previous owners may also have changed the hardware.

Keep electronic damping, active anti-roll control and rear steering separate when discussing the work. Ask which systems your car has, which functions the proposed kit will retain and which additional parts or procedures the workshop needs. A dashboard driving mode does not establish that a replacement kit preserves those functions.

Model history: BMW early F01/F02 chassis training, archive mirrorBMW F01/F02 vertical dynamics training, archive mirrorBMW 2012 7 Series update.

Start with your F01 / F02.

Match the model year, drivetrain and body style before comparing brands.

Midnight-blue BMW F01 saloon outside a stone workshop

F01 without air suspension

BC lists I-73 for the 2009-2015 rear-wheel-drive F01, explicitly excluding air suspension. Have GSM confirm the engine, build and axle ratings against the actual steel-spring setup on your car. An air-equipped F01 needs a separate check; age alone does not make this non-air reference suitable.

Check I-73 for my non-air F01
Dark green BMW F01 saloon beside a mechanic outside a workshop

Selected F01 models with AST

AST lists ACS-B2106SD for the F01 730d, 730i, 740d, 740i and 750i RWD. The table gives a 2008-2015 application range. Have GSM confirm your exact build and rear system, the omitted rear springs, retained components and usable height-setting method. Its short set description names F10/F06, so that discrepancy also needs clarification.

Check my AST F01 application and parts
Silver long-wheelbase BMW F02 saloon outside a brick hotel

F02 Li air-to-coil conversion

BC lists I-93 for the 2009-2015 rear-wheel-drive F02 as an air-to-coil conversion; the shop specifies Li only. Discuss it as a change from the air-spring system. Confirm the exact car, complete hardware, mounts, electronic damping and what happens to self-levelling and other affected functions. AST's separate workbook has no F02 row.

Discuss my F02 Li conversion
Graphite-grey BMW F01 saloon beside closed pit garages

xDrive, other engines and altered cars

The checked applications do not establish xDrive, 760, ActiveHybrid or Alpina fitment. AST names five F01 engines; BC's broader family rows still need an exact engine and equipment check. Provide details of changed springs, dampers, mounts or air-system parts. The body code and shared product photograph cannot establish the complete fitting requirements.

Check my exact version and changes

Compare the three fitting routes

Match the actual rear system and exact application, then compare the complete hardware, retained functions and workshop quote.

Once the non-air F01 application is confirmed, agree I-73's ordered springs, mounts and usable height.

Read the buying advice

The current I-73 shop kit is BR RS with rubber top mounts. BC's BR control changes compression and rebound together. Include worn parts, normal load and wheel clearance in the fitting discussion. If your F01 is one of AST's named models, ask GSM to confirm AST's complete rear package before comparing fitted quotes. I-73 excludes an air-equipped F01.

  • Confirm the actual non-air suspension
  • Agree ordered parts and retained functions
  • Include height setting and alignment
Discuss my non-air F01 setup

I-93 is a conversion enquiry. Confirm the complete hardware and affected functions before deciding to replace the air-spring system.

Read the buying advice

Ask GSM and the workshop to list the supplied front and rear assemblies, mounts and any additional parts for your exact F02 Li. Agree what happens to electronic damping, self-levelling and other chassis functions, including any required steering or sensor procedures. Provide the usual passenger and luggage load and wheel specification. The conversion label alone does not establish a complete parts list or retained functions.

  • Confirm the F02 Li RWD application
  • List the complete conversion hardware
  • Agree the affected functions and fitting work
Discuss my F02 Li conversion quote

For a named F01 RWD application, confirm the rear contents and height-setting method before ordering ACS-B2106SD.

Read the buying advice

AST's non-inverted 5100 has rebound and height adjustment and uses OE top mounts. Its exact F01 rows omit rear springs. Have GSM identify the springs or air-system parts retained or replaced, the rear assemblies and the work on the original controls. Include those parts and sound mounts in the fitted quote. For a modified car, also provide its finished weight, wheel and tyre specification and existing chassis changes.

  • Match the named engine and exact build
  • Confirm rear parts and height adjustment
  • Include mounts and electronic work
Check the AST rear package for my F01

Check whether the rear uses steel springs or air

A spring surrounding a damperA fixed component diagram. The coil spring surrounds the shock absorber and rests on its spring seats. It does not show vehicle dimensions, mounting hardware or suspension movement.Coil springDamperSpring seat

The rear spring surrounds the damper on a standard early F01 with steel rear springs.

Component layout only. Mounts, dimensions and adjusters vary by kit.

BMW's early F01 steel-spring arrangement has a coil spring around each rear damper. The illustration shows that factory configuration only. BMW also describes optional rear air suspension on F01 and rear air-spring struts on F02. Those air struts are a different arrangement from the steel-spring unit pictured.

Later BMW factory information also describes self-levelling rear air suspension. Confirm the build, market and actual hardware on your car before discussing a replacement. This factory illustration does not show AST's supplied contents or approve a change from air to steel springs.

Match the replacement route to that hardware: BC I-73 excludes air suspension, BC I-93 is a separate F02 air-to-coil conversion, and AST's F01 rows omit rear springs. Confirm each kit's complete assemblies, mounts, retained parts and usable height-setting method. Follow the exact instructions, and set the height before final alignment and any required steering or sensor checks.

Understand height and spring preload
Dark green BMW F01 saloon beside a mechanic outside a workshop

Get the retained parts and fitting work in writing

Ask the workshop to identify the actual rear spring system and inspect the dampers, top mounts, bushes and suspension joints. Confirm the chosen kit's complete front and rear contents. With I-93, obtain the full conversion parts and work list; with AST, resolve the omitted rear springs and retained components. Agree the rear height-setting method before the car is dismantled.

Provide wheel widths, offsets, tyre sizes and spacer details. Include checks through steering and suspension movement, with your normal passenger and luggage load. Ask which electronic damping and chassis functions remain, and include alignment, any required steering or sensor procedures and follow-up checks in the quote.

Rear springs and air-system hardware

Identify the actual rear suspension, including any previous conversion or lowering. I-73 excludes air suspension; I-93 is a separate F02 Li conversion; AST's rear parts remain a supplier check. Have the exact supplied and retained hardware listed for the chosen route, with its height-setting method.

Electronic damping and chassis controls

Identify electronic damping, active anti-roll control and rear steering separately. Ask which functions the kit will retain and what additional work is needed. Resolving a warning light does not by itself establish retained electronic damping or self-levelling.

Wheels, tyres and suspension travel

Provide the actual widths, offsets, tyre sizes and spacers, including both wheel sets if you use more than one. Have clearance to the suspension, arches and liners checked through steering and suspension movement at the intended height and normal load.

Mounts, joints and final setup

The BC shop entries are BR RS with rubber mounts; confirm the front and rear mounting parts in the order. AST uses OE top mounts, so inspect them and include replacements where needed. Address worn joints and bushes, then set the height before final alignment and any required steering or sensor checks.

The current F01 / F02 range.

Compare the controls and hardware included in each range.

BC Racing

The current shop lists I-73 BR RS for F01 RWD without air suspension and I-93 BR RS separately for F02 RWD, Li only, as an air-to-coil conversion. Both BC application rows cover 2009-2015. The shop lists nominal front/rear spring rates of 10/4.5 kg/mm and rubber top mounts for both; confirm the ordered specification and complete assemblies. The shared rates do not make the applications interchangeable. BR's control changes compression and rebound together and the dampers are rebuildable. Have I-93's conversion hardware and affected electronic and self-levelling functions confirmed in the fitted quote.

View BC Racing F01 / F02 kits

AST

ACS-B2106SD appears in AST's non-inverted 5100 application column without top mounts for five F01 rear-wheel-drive models: 730d, 730i, 740d, 740i and 750i. The table gives a 2008-2015 application range. The 5100 family has rebound and height adjustment, uses OE top mounts and is rebuildable. Each F01 row omits rear springs and names front droplinks. The workbook's short set description names F10/F06 instead of F01, so have GSM resolve that discrepancy and confirm the complete rear package for your car. AST has no F02 application row; BC's separately listed I-93 remains a distinct conversion enquiry. Check current build and delivery arrangements before booking fitting.

View AST F01 / F02 kits

Find your F01 / F02 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

3 listings

Selected application: All F01 / F02 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All F01 / F02 kit links and part numbers

Before you order.

  1. Identify your car

    Send the full model and engine, F01 or F02 body code, build date and original market. State rear-wheel drive or xDrive, and provide the permitted axle ratings.

  2. Match the kit

    Have the actual rear spring system identified. Include the factory damping and chassis options, plus any changed springs, dampers, mounts or air-system parts.

  3. Check what’s included

    Have I-73's non-air application, I-93's F02 Li conversion or AST's named F01 application checked for your car. Confirm the complete assemblies, mounts, springs or air-system parts supplied or retained, and the usable height-setting method at each end.

  4. Check your modifications

    Provide wheel widths, offsets, tyre sizes and spacer details, with the load you normally carry. Have clearance and suspension travel checked at the proposed height.

  5. Plan fitting

    Agree the electronic work and retained functions. Include worn parts, height setting, alignment, any required steering or sensor procedures and follow-up checks in the quote, and confirm availability before booking.

Questions about BMW F01 / F02 coilovers.

Check the details before choosing your kit.

Which kit should I discuss for an F01?

BC lists I-73 for the 2009-2015 RWD F01 excluding air suspension. AST separately lists ACS-B2106SD for the 730d, 730i, 740d, 740i and 750i RWD in a 2008-2015 application range. Have the exact engine, build and actual suspension checked. I-73's non-air restriction and AST's unresolved rear contents need different fitting discussions.

Is I-93 a replacement that keeps the F02's air springs?

BC describes I-93 as an F02 RWD air-to-coil conversion, and the shop specifies Li only. Have GSM confirm the complete hardware and work for your exact car, including what happens to electronic damping, self-levelling and other affected functions. AST's workbook has no F02 row; it does not establish this conversion's contents.

Are xDrive, 760, ActiveHybrid or Alpina models covered?

The checked applications do not establish those versions. BC's rows specify RWD and need an exact engine and equipment check; AST names five F01 RWD engines. Give GSM the full model, build details, axle ratings and existing suspension so they can confirm an application and complete parts list.

Does an early F01 always have steel rear springs?

BMW's early training describes a standard F01 steel-spring arrangement and optional rear air suspension. It describes rear air on F02, and later factory information also discusses rear air suspension. Check the build specification against the actual parts instead of identifying the system from age alone.

Does AST include rear springs or an air-to-coil conversion?

Each checked AST F01 row omits rear springs. That does not establish an air-to-coil conversion or a complete rear height-adjustment solution. BC I-93 is a separate F02 Li conversion listing. Have the exact chosen kit's assemblies, retained spring or air-system parts and height-setting method confirmed before ordering.

Will the kit retain electronic damping and self-levelling?

Have the retained functions and required work confirmed for your actual suspension and the exact ordered kit. Electronic damping, rear self-levelling, active anti-roll control and rear steering are distinct functions. The application row and general series description do not establish that they will all remain.

How much can I lower my F01 or F02?

Ask for the exact kit's usable adjustment range and the rear height-setting method for your spring system. Agree a height that leaves sufficient travel and clearance for your wheels, tyres, roads and normal load. Set it before final alignment and any required steering or sensor checks.

Which top mounts do these kits use?

The current BC shop entries are BR RS with rubber top mounts; confirm the front and rear mounts supplied in your order. AST's 5100 uses OE top mounts and sits in the workbook's group without top mounts. Inspect retained mounts and include replacements and other worn parts in the fitting quote.

Let’s talk suspension.

Send GSM your exact 7 Series model, build details and drivetrain, with the rear spring system and previous changes identified. Include your wheels, tyres and normal use so they can check the application, retained parts and complete fitting work.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.