Midnight-blue BMW F13 Coupe outside a stone workshop

BMW F06 / F12 / F13.
The coilover guide.

Shop the coilovers

For a non-M6 rear-wheel-drive F12 Convertible or F13 Coupé, discuss BC's I-27. The F06 Gran Coupé and M6 Gran Coupé have separate references. If you are considering AST for an F06 640i or 650i, confirm the rear parts before agreeing the fitted quote.

Which F06 / F12 / F13 do you have?4 listed kits · 2 brandsReviewed 18 November 2026

Identify the body, drivetrain and factory suspension

If your 6 Series rides harshly or feels loose, have the dampers, mounts and suspension joints inspected before choosing how much to lower it. Tell the fitter what you want to improve, the roads you use and the passengers or luggage you normally carry. Agree a height that leaves enough suspension travel and clearance for that use.

The three BC references cover different rear-wheel-drive applications: I-27 for the non-M6 F12/F13, I-45 for the F06 Gran Coupé and I-60 for the F06 M6 Gran Coupé. AST's ACS-B2106SD application list names only the 2012-2018 rear-wheel-drive F06 640i and 650i within this generation. Have the exact car, original suspension and complete supplied parts checked before ordering.

F12 is the soft-top Convertible, F13 the two-door Coupé and F06 the four-door Gran Coupé. BMW presented the Convertible in November 2010 and the Coupé in March 2011; the Gran Coupé followed in December 2011. Use the full engine designation, build date and original market when asking for a kit. Include the permitted axle ratings and whether the car is rear-wheel drive or xDrive.

Check the build specification against the dampers and chassis equipment actually on the car. Electronic damping controls the dampers, Adaptive Drive includes active anti-roll control, and Integral Active Steering includes rear-wheel steering. BMW's equipment specifications varied by model, market and date, so a cabin mode button or M Sport badge is not enough to identify the hardware. Agree which functions the replacement will retain and any extra parts or procedures before the car is dismantled.

Model history: BMW Convertible presentation, November 2010BMW Coupé presentation, March 2011BMW Gran Coupé presentation, December 2011.

Start with your F06 / F12 / F13.

Match the model year, drivetrain and body style before comparing brands.

Silver BMW F12 Convertible with its roof down outside a brick garage

F12 Convertible and F13 Coupé, other than M6

BC lists I-27 for the 2011-2018 rear-wheel-drive Cabrio/Coupé application. Tell GSM which body you have, along with the engine, axle ratings and factory damping details. Confirm the ordered spring specification and mounts for your car. Use the Convertible's own load and clearance measurements when agreeing its height.

Check my F12 or F13
Dark grey BMW F06 Gran Coupe beside a mechanic with a clipboard

F06 Gran Coupé, other than M6

BC lists I-45 for the 2012-2018 rear-wheel-drive F06. AST lists ACS-B2106SD for the 640i and 650i rear-wheel-drive Gran Coupé in those years. The AST entry omits rear springs, so ask GSM to confirm the complete rear parts and height adjustment for your car. Its listed petrol applications do not approve a 640d or xDrive model.

Check my F06 Gran Coupé
Silver four-door BMW F06 M6 Gran Coupe outside pit garages

F06 M6 Gran Coupé

I-60 is BC's separate reference for the 2013-2019 rear-wheel-drive M6 Gran Coupé. Have the M6's original electronic damping, supplied mounts and any additional work checked as part of the quote. This F06 listing does not establish fitment for an M6 Coupé or Convertible, and the non-M6 I-27 and I-45 references are not substitutes.

Check my M6 Gran Coupé
Midnight-blue BMW F13 Coupe outside a stone workshop

xDrive, M6 Coupé or Convertible, and altered cars

Ask GSM to confirm a kit for your exact model if you have xDrive, an F12/F13 M6 or a car with previous suspension changes. Send the build specification and details of the parts now fitted. None of the four entries here establishes those additional applications. A shared body code or similar-looking mounting point is not approval to fit one.

Check my exact model and equipment

Choose the kit and the fitting work together

Use the exact application first, then compare the supplied hardware, controls and work your car needs.

Kit starts from£1,049.00inc. VAT · I-27 BR RS · confirm your non-M6 F12/F13 application

Once I-27 is confirmed for your car, agree its spring specification, mounts and usable ride height.

Read the buying advice

The current I-27 shop kit is BR RS with rubber top mounts. BC's BR damping control changes compression and rebound together. Include worn joints and mounts in the fitting quote, and leave enough travel and clearance for the roads and load you use. An F06 needs its own reference: discuss I-45 for the Gran Coupé or I-60 for the M6 Gran Coupé.

  • Confirm the body and rear-wheel-drive application
  • Agree the supplied mounts and spring specification
  • Include height setting and alignment
View our recommended kit

Discuss ACS-B2106SD for the listed rear-wheel-drive models after GSM confirms the rear contents and height adjustment.

Read the buying advice

AST lists a non-inverted 5100 kit with rebound and height adjustment, using original top mounts. Its application rows omit rear springs. Ask which rear parts you retain or replace, how the intended rear height is achieved and what work the original damping system needs. Include those parts and sound OE mounts in the fitted quote before comparing it with BC. Follow AST's own setup instructions for the ordered kit.

  • Match the listed engine, years and drivetrain
  • Confirm rear springs and height adjustment
  • Check retained mounts and electronic work
Check the AST F06 parts and fitting

Give the builder the car's actual weight, wheel and tyre specification, chassis changes and intended events.

Read the buying advice

Agree the spring and damper specification from the completed car and how you will use it. Provide details of both wheel sets if you also drive it on the road. Include factory damping and active chassis equipment, altered mounts and any brake or aero changes. Check the event's safety requirements, especially for a Convertible, and plan inspections and damper servicing with the builder.

  • Use the completed car's weight and equipment
  • Check wheel clearance and suspension travel
  • Agree event requirements and servicing
Discuss my 6 Series circuit project

The F12/F13 rear spring surrounds the damper

A spring surrounding a damperA fixed component diagram. The coil spring surrounds the shock absorber and rests on its spring seats. It does not show vehicle dimensions, mounting hardware or suspension movement.Coil springDamperSpring seat

The rear spring surrounds the damper on a standard non-M6 F12/F13.

Component layout only. Mounts, dimensions and adjusters vary by kit.

BMW's F12 chassis drawing shows a rear spring strut with the coil spring around the damper. Its technical training also describes conventional rear spring struts on the F12/F13. The illustration identifies that factory layout on non-M6 F12/F13 models; confirm the exact car and every replacement kit's supplied assemblies separately.

AST's F06 640i and 650i application rows omit rear springs. Have GSM confirm which springs, mounts and other rear parts are retained or supplied, and how the proposed rear ride height is set. The omission does not establish that your car has air suspension or needs a conversion. A shared F01/F10/F06 reference or family photograph does not settle the contents.

Have the fitter set the height within the exact kit's usable range and check clearance through suspension travel with your normal load. Book final alignment after the height is settled, along with any required steering or sensor procedures.

Understand height and spring preload
Dark grey BMW F06 Gran Coupe beside a mechanic with a clipboard

Get a complete fitting quote before ordering

Ask the workshop to inspect the existing dampers, mounts, suspension arms, bushes and joints. Confirm the supplied parts and anything that must be retained or renewed. With AST, settle the rear spring and height-adjustment details. For either brand, identify the original damping and active chassis equipment and price the necessary work before dismantling the car.

Provide wheel widths, offsets, tyre sizes and spacer details. Have the fitter check clearance to the suspension, arches and liners through steering and suspension movement. Include height setting, alignment, any required steering or sensor procedures and follow-up checks in the quote.

Electronic damping and active chassis equipment

Confirm which systems the car has and which functions the replacement will retain. Electronic damping, active anti-roll control and rear steering are different functions. Ask how any warning lights and required steering or sensor procedures will be handled for your exact build.

Wheels, tyres and spacers

Send the actual sizes and offsets, including both road and circuit wheels if you use them. A wheel that clears the standard suspension may need a fresh clearance check with the replacement damper and spring. Have the fitter check throughout steering and suspension travel at the intended height.

Mounts and worn joints

The shop's BC entries are BR RS with rubber mounts; confirm the mounts supplied with the exact order. AST uses OE top mounts, so include their condition and any replacements in the quote. New dampers will not repair worn suspension joints or bushes.

Height and alignment

Ask for the exact kit's usable adjustment range and the reference height used for any quoted drop. Allow for the car's normal load and the roads you drive. Set the height before final alignment and any required steering or sensor checks; agree the settings from measurements of your car.

The current F06 / F12 / F13 range.

Compare the controls and hardware included in each range.

BC Racing

The current shop entries are BR RS: I-27 for the non-M6 F12/F13, I-45 for the F06 Gran Coupé and I-60 for the F06 M6 Gran Coupé. BC's application list identifies these as rear-wheel-drive applications. The shop lists nominal front/rear spring rates of 11/5.5, 10/4.5 and 10/6 kg/mm respectively. Confirm the ordered rates and mounts alongside your axle ratings and intended use. The figures alone do not establish comfort or interchangeability. BR's damping control changes compression and rebound together.

View BC Racing F06 / F12 / F13 kits

AST

ACS-B2106SD is a non-inverted 5100 entry for the 2012-2018 rear-wheel-drive F06 640i and 650i Gran Coupé. The 5100 family has rebound and height adjustment, uses OE top mounts and is rebuildable. The exact application rows omit rear springs and name front droplinks. Confirm the complete rear parts, retained components and height adjustment before ordering. Check current build and delivery arrangements before booking installation.

View AST F06 / F12 / F13 kits

Find your F06 / F12 / F13 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

4 listings

Selected application: All F06 / F12 / F13 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All F06 / F12 / F13 kit links and part numbers

Before you order.

  1. Identify your car

    Send the full model and engine, body code, build date and original market. State rear-wheel drive or xDrive, and whether it is an M6.

  2. Match the kit

    Provide the permitted axle ratings, factory damping and chassis options, plus details of any previous suspension changes.

  3. Check what’s included

    Have the complete kit checked for your car, including the ordered spring specification, supplied mounts and required electronic work. For AST, confirm the rear springs, retained parts and usable height adjustment.

  4. Check your modifications

    Provide wheel widths, offsets, tyre sizes and spacer details. Have clearance checked through steering and suspension movement at the intended height.

  5. Plan fitting

    Confirm availability before booking the job. Include worn parts, height setting, alignment, any required steering or sensor procedures and follow-up checks in the fitting quote.

Questions about BMW F06 / F12 / F13 coilovers.

Check the details before choosing your kit.

Which BC reference should I ask about?

Discuss I-27 for a non-M6 rear-wheel-drive F12 Convertible or F13 Coupé, I-45 for the rear-wheel-drive F06 Gran Coupé and I-60 for the rear-wheel-drive F06 M6 Gran Coupé. Have the exact engine, build date, axle ratings and original suspension checked. These references cover different applications.

Do these listings cover my xDrive 6 Series?

The three BC applications and the two F06 AST applications checked here specify rear-wheel drive. Ask GSM to confirm a kit for your exact xDrive model. A matching F06, F12 or F13 body code does not establish all-wheel-drive compatibility.

Does the AST F06 listing include the 640d or M6?

AST's ACS-B2106SD rows name the 2012-2018 rear-wheel-drive F06 640i and 650i Gran Coupé. They do not establish 640d, M6, xDrive, F12 or F13 fitment. Have a separate application confirmed for those cars.

Does the AST kit include rear springs?

The exact F06 application rows state that rear springs are omitted. Ask GSM which rear parts are retained or supplied and how the intended height is achieved before ordering. That note does not identify your factory suspension type or approve an air-suspension conversion.

Will coilovers retain the factory damping and chassis controls?

Confirm this for the exact kit and equipment on your car. Electronic damping, active anti-roll control and rear steering need separate consideration. Agree which functions will remain and any additional parts or procedures; a kit listing or a warning-light solution does not by itself establish retained electronic damping.

Which top mounts do these kits use?

The current BC shop entries are BR RS with rubber top mounts. Confirm the front and rear parts supplied with your order. AST's 5100 entry uses OE top mounts, so have their condition checked and include replacements where needed in the fitting quote.

How low should I set my F06, F12 or F13?

Agree a height within the exact kit's confirmed usable range that leaves enough travel and clearance for your roads and usual load. Have the fitter check the car through steering and suspension movement, including the actual wheels, tyres and spacers. A quoted drop from another body or factory suspension is not a setting to copy.

When should I book the alignment?

Have the height set and the suspension settled before final alignment. Include any required steering or sensor procedures and follow-up checks in the fitting quote. Use the measurements and requirements for your exact car and intended use.

Let’s talk suspension.

Send GSM the exact 6 Series model, build details and drivetrain, with the factory suspension and any changes already fitted. Include your wheel and tyre specification and how you use the car so they can check the kit and complete fitting work.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.