
BMW F10 / F11.
The coilover guide.
Shop the coiloversStart with the saloon or Touring application and the drivetrain. The Touring's rear air system and the M5's suspension need separate fitting plans. Identify factory electronic dampers before ordering.
Match the body and factory suspension to the kit.
Before choosing coilovers for your 5 Series, identify the F10 saloon or F11 Touring, rear-wheel drive or xDrive, and the factory dampers. The Touring's original rear air suspension needs its own fitting plan. Check an M5 separately: its suspension differs from the ordinary saloon.
Tell the fitter what you want to change about the ride or height, and provide your wheel and tyre details. For everyday use, allow for your usual passengers, luggage and the entrances you need to clear. If the car has electronic damping, agree how the replacement kit will handle it before ordering.
F10 identifies the saloon and F11 the Touring in this 5 Series generation, introduced in 2010. The F07 Gran Turismo and long-wheelbase F18 need separate applications. Match the build date, engine and original market to the exact kit; different suppliers' application dates do not establish the specification of your car.
BMW describes conventional coil springs and dampers at both ends of the ordinary F10, with electronic damping optional. Its 2010 Touring press information specifies self-levelling rear air suspension as standard. Have the actual equipment identified, including any later conversion or replacement dampers.
The M5 has its own suspension components and electronic damper control. BMW identifies an M-specific Integral IV rear axle, while the ordinary F10 uses Integral V. The M5 badge and its exact build details belong on the enquiry; an ordinary saloon listing does not establish M5 fitment.
Start with your F10 / F11.
Match the model year, drivetrain and body style before comparing brands.

F10 rear-wheel-drive saloon
BC lists I-16 for the rear-wheel-drive F10. AST ACS-B2106SD covers selected petrol models, and TEIN VSGA2-C1SA3 names the UK 520i, 2011-2016. Send the exact engine and factory damper details. AST lists its reference without rear springs, so confirm the rear components and original parts required before ordering.
Check my F10 saloon
F11 Touring and rear air suspension
BC I-63 names the rear-wheel-drive Touring without rear springs; BC says its rear height is adjusted through the original system. AST ACS-B2105SD names selected petrol Touring models. Have the fitter identify the existing air and self-levelling equipment, then confirm the exact kit's supplied parts and height-setting method. Neither listing confirms an air-to-coil conversion.
Check my F11 Touring
xDrive: separate saloon and Touring kits
BC lists I-105 for the AWD F10 and I-156 for the AWD F11. The Touring shop entry says without rear springs. Confirm your engine, build date, front assembly and existing rear system against the chosen reference. Ask how I-156 sets the rear height; the published row does not give the same instructions as I-63.
Check my xDrive application
F10 M5: confirm the electronic requirements
BC lists I-164 for the rear-wheel-drive F10 M5. The shop gives 2012-2016, while BC's application list starts in 2011, so include the build date and original market. Have GSM confirm the current application and how the replacement kit works with M5 electronic damping. The listed rubber top mounts do not confirm which EDC functions remain or whether cancellation parts are needed.
Check my M5 specificationWhat do you want
from the car?
Choose advice for everyday driving, occasional circuit days or a dedicated track project.
Choose the height with your usual roads and normal load in mind.
Read the buying advice
Explain what you want to change about the current ride and include your wheel and tyre sizes. Agree a height that clears your driveway and leaves the suspension room to work with passengers and luggage. Compare the exact saloon or Touring application, and include mounts and any required original parts in the fitting quote. A Touring needs a plan for rear air and self-levelling; settle the electronic-damper requirements on an equipped car before ordering.
- Allow for passengers and luggage
- Include mounts and original parts
- Set height before final alignment
Discuss both uses of the car before agreeing the springs and damping.
Read the buying advice
Give the fitter both wheel and tyre specifications if you use another set on circuit. Ask for the spring and damper specification to suit the car's weight, tyres and normal road use. AST's RWD engine lists and TEIN's UK 520i entry are narrower than the whole F10/F11 range. Check the intended use, working travel and loaded clearance with the supplier; a model listing or damper adjustment count does not confirm suitability for an event.
- Provide both wheel and tyre sets
- Agree springs and damping for both uses
- Keep the measurements and setup record
Specify the suspension with the builder using the completed car's details.
Read the buying advice
Supply the measured weight, tyres and brakes, together with changes to the mounting points or suspension. Agree the spring rates, damping and travel for the intended event. Include the electronics plan on an M5 or another car with adaptive dampers, and the rear-system plan on a Touring. Ask for the complete specification and check event eligibility before ordering; the listed road-model applications do not approve a converted car.
- Measure the completed car
- Agree mounts and electronic requirements
- Check the intended event rules
The saloon's rear spring unit differs from the Touring's air system.
The rear spring surrounds the damper on a standard BMW F10 saloon.
Component layout only. Mounts, dimensions and adjusters vary by kit.BMW's ordinary F10 rear-axle drawing shows a coil spring around the damper. The diagram represents that saloon arrangement. Match the selected kit's actual rear components, mounting parts and adjustment instructions to your car.
BMW specifies self-levelling rear air suspension on the F11 Touring. BC I-63 is listed without rear springs and keeps rear height adjustment on the original system. Confirm the height-setting method and retained equipment for the exact Touring kit, particularly I-156 AWD or AST; the I-63 note does not settle their instructions.
AST ACS-B2106SD is also listed without rear springs for selected F10 petrol models. That does not make the saloon a rear-air application. Ask which spring seats, dampers and original parts its fitting instructions require, then have the workshop check spring retention where applicable, working travel and loaded wheel clearance.
Understand height and spring preload
Include the complete fitting work in the quote.
Have the fitter inspect bushes, joints and retained mounts before ordering. Confirm which front and rear mounts, bearings, spring seats and fixings the selected kit supplies or reuses. Agree the electronic-damper requirements where fitted. On a Touring, identify the existing rear air equipment and obtain the instructions for the chosen height-setting method.
Provide wheel width, offset, tyre size and any spacer details. Check clearance through steering and suspension movement, with normal loads allowed for. Set the finished height before final measured alignment, and keep the settings and follow-up requirements with the service record.
Touring air and self-levelling
Record the rear air equipment and any previous conversion. Ask how the exact kit sets the height and which original components remain. A listing marked 'without rear springs' does not confirm an air-to-coil conversion or the parts needed for one.
Electronic dampers and M5
Identify factory electronic damping before choosing a replacement. Ask for the required connections, retained functions and any additional parts in writing. TEIN EDFC compatibility concerns TEIN's own controller; it does not establish integration with BMW EDC.
Wheels, tyres and spacers
Supply the actual wheel width, offset, tyre size and spacers. Have the fitter check the wheel against the selected spring and damper assembly through movement. A photograph or another owner's ride height does not confirm clearance on your car.
Lowering and factory sport suspension
Check the reference height used for any published lowering range. Allow for existing factory lowering and normal loads before choosing the finished height. TEIN's recommended adjustment range is separate from its much wider mechanical maximum.
The current F10 / F11 range.
Compare the controls and hardware included in each range.
The five listed BR RS references separate F10 RWD I-16, F11 RWD I-63, F10 AWD I-105, F11 AWD I-156 and F10 M5 I-164. The shop gives nominal front/rear rates of 10/4.5 kg/mm for I-16, 10/5 for I-105 and 10/6 for I-164. The two Touring entries give 10 kg/mm front and leave the rear rate unspecified. Confirm the rubber-mount configuration and complete list of supplied and retained parts. Spring rates alone do not tell you how comfortable the car will be or whether the kits can be interchanged.
View BC Racing F10 / F11 kitsACS-B2106SD names RWD F10 520i, 528i, 530i, 535i and 550i; ACS-B2105SD names RWD F11 520i, 523i, 528i, 530i, 535i and 550i. AST lists the F10 reference without rear springs. Confirm the current series, mounting parts and rear components, including the Touring's rear-air requirements. Shared F01 and F06 entries for B2106SD do not establish fitment for another 5 Series engine or xDrive.
View AST F10 / F11 kitsThe UK FLEX Z application for VSGA2-C1SA3 names the F10 520i, 2011-2016, 2.0-litre rear-wheel drive. It gives 9/6 kgf/mm front/rear springs and rubber upper mounts. Recommended height adjustment is 20-40 mm below standard at the front and 15-35 mm at the rear, with reference settings of 30/25 mm below standard. Those figures are not a target for every car. Confirm the original suspension and electronic requirements; the shared part number on a Chinese-market F18 row does not extend the UK application.
View TEIN F10 / F11 kitsFind your F10 / F11 coilovers.
Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.
8 listings
Selected application: All F10 / F11 applications
Match the drivetrain, body style and axle-load limits on the product page before ordering.

TEIN · VSGA2-C1SA3
TEIN FLEX Z Coilovers for BMW 520i F10 - VSGA2-C1SA3
Check the exact application
![BC Racing Coilovers - BMW 5 Series Touring (W/O Rear Spring) (10-17) [F11]](/images/09cf8cd191b679-480.webp)
BC Racing · BCR-I-63
BC Racing Coilovers - BMW 5 Series Touring (W/O Rear Spring) (10-17) [F11]
Check the exact application

AST · ACS-B2105SD
AST 5100 Street Coilovers for BMW F11 Applications - ACS-B2105SD
Check the exact application
![BC Racing Coilovers - BMW M5 RWD (12-16) [F10]](/images/09cf8cd191b679-480.webp)
BC Racing · BCR-I-164
BC Racing Coilovers - BMW M5 RWD (12-16) [F10]
Check the exact application

AST · ACS-B2106SD
AST 5100 Street Coilovers for BMW F01 / F06 / F10 - ACS-B2106SD
Check the exact application
![BC Racing Coilovers - BMW 5 Series (AWD) (10-17) [F10]](/images/09cf8cd191b679-480.webp)
BC Racing · BCR-I-105
BC Racing Coilovers - BMW 5 Series (AWD) (10-17) [F10]
Check the exact application
All F10 / F11 kit links and part numbers
- BC Racing · BCR-I-16: BC Racing Coilovers - BMW 5 Series Sedan (10-17) [F10]
- BC Racing · BCR-I-63: BC Racing Coilovers - BMW 5 Series Touring (W/O Rear Spring) (10-17) [F11]
- BC Racing · BCR-I-105: BC Racing Coilovers - BMW 5 Series (AWD) (10-17) [F10]
- BC Racing · BCR-I-156: BC Racing Coilovers - BMW 5 Series Touring AWD (W/O Rear Spring) (10-17) [F11]
- BC Racing · BCR-I-164: BC Racing Coilovers - BMW M5 RWD (12-16) [F10]
- AST · ACS-B2105SD: AST 5100 Street Coilovers for BMW F11 Applications - ACS-B2105SD
- AST · ACS-B2106SD: AST 5100 Street Coilovers for BMW F01 / F06 / F10 - ACS-B2106SD
- TEIN · VSGA2-C1SA3: TEIN FLEX Z Coilovers for BMW 520i F10 - VSGA2-C1SA3
Before you order.
Identify your car
Send the body code, engine, build date and original market, plus both permitted axle ratings from the identification plate.
Match the kit
State rear-wheel drive or xDrive, and include the full M5 specification where relevant.
Check what’s included
Identify electronic dampers, rear air and self-levelling equipment, including any conversion or previous suspension changes.
Check your modifications
Provide wheel width, offset, tyre size and spacers. Match the full kit reference to the current fitting instructions and all supplied or retained parts.
Plan fitting
Confirm current supply before booking fitting, and include height setting, alignment and the workshop's follow-up requirements.
Questions about BMW F10 / F11 coilovers.
Check the details before choosing your kit.
Can I use an F10 saloon kit on an F11 Touring?
Use a Touring-specific application. BMW describes rear coil spring-struts on the ordinary F10 and self-levelling rear air on the F11. BC and AST list separate body references. Confirm the exact rear components and height-setting method; the saloon listing does not confirm Touring fitment or an air-to-coil conversion.
Which BC reference names my car?
I-16 names the rear-wheel-drive F10 saloon; I-63 the rear-wheel-drive F11 Touring. I-105 names the AWD F10 and I-156 the AWD F11. I-164 names the rear-wheel-drive F10 M5. Match the build date, engine, factory equipment and complete mounting requirements before ordering.
How does the Touring kit lower the rear?
BC says I-63 comes without rear springs and adjusts rear ride height on the original system. Have the fitter confirm the actual equipment and instructions. Ask separately for the I-156 AWD or AST method; the I-63 note does not establish their parts or procedure. Do not assume any of these supplies an air-to-coil conversion.
Why does the AST saloon reference say no rear springs?
AST's ACS-B2106SD application rows carry that note. BMW's ordinary F10 rear drawing shows coil springs around the dampers, so the note does not establish a rear-air application. Ask GSM to confirm the current kit's rear dampers, spring seats and retained original parts against its fitting instructions before ordering.
Does the TEIN FLEX Z listing cover every F10?
The checked UK VSGA2-C1SA3 row names the rear-wheel-drive 2.0-litre 520i, 2011-2016. Confirm the exact car and factory suspension. It does not approve other engines, xDrive, Touring, M5 or the Chinese-market F18 simply because the chassis family or part number is similar.
Will the kit retain BMW electronic damping?
Have GSM check the exact kit's electrical requirements against your original dampers. The M5 uses its own electronic damping arrangement, and an application label alone does not confirm retained functions or cancellation parts. TEIN EDFC is a separate TEIN controller and does not establish BMW EDC integration.
Which engines appear in AST's application rows?
ACS-B2106SD lists RWD F10 520i, 528i, 530i, 535i and 550i. ACS-B2105SD lists RWD F11 520i, 523i, 528i, 530i, 535i and 550i. These rows do not extend approval to diesel engines, xDrive or M5. Confirm the current series and exact supplied and retained hardware for your car.
How much should I lower my F10 or F11?
Have the supplier confirm the working height range for your exact kit and car, then choose a height that allows for the original suspension, normal loads and wheel clearance. TEIN's UK 520i row recommends 20-40 mm below standard front and 15-35 mm rear, separate from its mechanical maximum. Have the fitter check working travel and spring retention where applicable before final alignment; those figures do not apply to another kit or every 5 Series.
Let’s talk suspension.
Send your F10 or F11's engine, build details and axle ratings. Include the drivetrain, factory suspension and wheels so GSM can check the exact application and fitting requirements.





