Blue BMW G22 Coupé outside a country workshop

BMW G22 / G26.
The coilover guide.

Shop the coilovers

For a G22 Coupé or G26 Gran Coupé, start with the engine, rear-wheel drive or xDrive, and whether the car has electronic dampers. Have the kit checked against those details before ordering. If you have Adaptive M, ask which damping functions the replacement will retain.

Which G22 / G26 do you have?16 listed kits · 3 brandsReviewed 18 November 2026

Identify the body and original damping system

Tell GSM what you want to change about the ride and how much lower you want the car to sit. Include the roads you use, the load you normally carry and your actual wheel and tyre specification. Have the existing dampers, mounts and suspension joints inspected, then agree a height with enough travel and clearance for that use.

For a G22, start with the exact Eibach application or the AST listing for M440i xDrive. For a combustion-engine G26, BC separates rear-wheel-drive and AWD references; Eibach's listed Gran Coupé application is rear-wheel drive. Send the full model, build date, original market, axle ratings and factory damping details. The G23 Convertible, M4 and electric i4 need separate enquiries; these listings do not establish their fitment.

G22 is the Coupé and G26 the Gran Coupé in this 4 Series family. BMW presented the G22 in June 2020 ahead of its October market launch. Supplier tables shared with other BMW models can have earlier starting dates, so use your actual build details when having a kit checked.

BMW's launch information distinguishes passive lift-related dampers, M Sport suspension and Adaptive M electronically controlled dampers. Confirm the equipment on your car against the build specification and parts actually fitted. The badge or driving-mode button alone does not identify every component, and equipment varies by market and build.

The electric i4 shares the G26 designation but needs its own suspension application. BMW's April 2024 Ireland release describes self-levelling rear air suspension on the i4. Have a separate kit confirmed for the electric car's exact build and suspension.

Model history: BMW G22 launch and factory suspensionBMW i4 and Gran Coupé update, Ireland.

Start with your G22 / G26.

Match the model year, drivetrain and body style before comparing brands.

Blue BMW G22 Coupé outside a country workshop

G22 Coupé with Eibach

Match the Pro-Street-S part to the exact engine, rear-wheel drive or xDrive, axle ratings and original damping. The G22 listings separate those conditions. Note 21 excludes cars with electronic suspension. Note 176 kits include PRO-TRONIC to suppress the damper error message, but you lose electronic damping control. Ask GSM to resolve the undefined note A and confirm the technical certificate and required parts before ordering.

Check my G22 Eibach application
Graphite BMW G22 Coupé beside pit garages

G22 M440i xDrive with AST

AST's five listed kits name M440i xDrive G22, with EDC and NON-EDC application rows. They do not establish other G22 engines or G26 fitment. Compare the OE-mount ACU, front-mount ACT and competition variants, then confirm the exact mounts, rear assemblies and electronic work. The G22 row names front droplink DLA-10-233-251; confirm what is included in your order.

Check my M440i xDrive AST setup
Dark-green BMW G26 Gran Coupé outside a workshop with a mechanic holding a clipboard

Combustion-engine G26 with BC Racing

Discuss I-116 for rear-wheel drive or I-151 for AWD. The current I-116 listing has BR RA and RM MA options; RM MA has different inverted front damper construction. I-151 is a separate BR RA listing. Have GSM check the exact engine, build, axle ratings and factory damping, with the supplied mounts and complete parts list. These G26 references do not establish G22 or i4 fitment.

Check my G26 and BC configuration
Silver BMW G26 Gran Coupé on a forecourt

G26 rear-wheel drive with Eibach

The listed Gran Coupé reference is PSS65-20-045-09-22 for 420i, 430i and listed 420d versions. Its conditions exclude 4WD, electronic suspension and levelling control, with maximum front/rear axle loads of 1070/1345 kg. Confirm the exact engine and build against the technical documents, including unresolved note A and any additional OE parts. This entry does not cover G26 xDrive or i4.

Check my G26 Eibach conditions

Choose the hardware for your car and use

Discuss the complete kit, retained functions and fitting work once the exact application is confirmed.

Start with your actual suspension and normal load, then compare the complete fitted quotes for the applicable kits.

Read the buying advice

For Eibach, choose the exact engine, drivetrain, axle-load and damping application before comparing specifications. For G26 with BC, distinguish I-116 RWD from I-151 AWD and confirm the chosen mounts. If the car has electronic dampers, agree what changes when they are replaced. Include worn parts, wheel clearance, height setting and alignment in the quote. A lower car still needs enough travel for the roads you use.

  • Match engine, drivetrain and original dampers
  • Leave enough travel and clearance
  • Include the complete fitting work
Discuss my 4 Series road setup

Give the fitter both wheel and tyre specifications if you change them for circuit days.

Read the buying advice

Once I-116 is confirmed for a rear-wheel-drive G26, compare BR RA with RM MA's inverted front dampers. They differ in construction as well as mount description. For a G22 M440i xDrive, compare AST's OE-mount ACU with front-mount ACT and the other applicable variants. Agree the spring and damper specification for your tyres and use, and confirm the rear assemblies and retained electronics. Plan inspections and servicing with the fitter.

  • Compare the actual assemblies and mounts
  • Provide both wheel and tyre sets
  • Agree inspections and servicing
Discuss my road and circuit use

Use the finished car's weight, tyres, mounts and intended events when agreeing the suspension specification.

Read the buying advice

For a G22 M440i xDrive project, AST's 5200 separates rebound and compression adjustment; the 5300 separates high- and low-speed compression as well. More controls require an agreed setup and servicing plan. Confirm the supplied mounts, rear arrangement and reservoir installation requirements for the exact build. For another G22 or G26 project, have the builder confirm an application first. Check the intended event's requirements; a catalogue row alone does not establish a competition setup.

  • Measure the finished car and confirm its application
  • Agree the spring, damper and mounting specification
  • Plan setup, servicing and event requirements
Discuss my 4 Series circuit project

The steel-sprung G22 has a separate rear spring

Separate rear spring and damperThe coil spring rests between its own seats, beside a separate shock absorber. This fixed component diagram does not show vehicle dimensions, mounting hardware or suspension movement.SpringDamper

On a steel-sprung G22, the rear coil spring is seated on a suspension arm separately from the damper.

Component layout only. Mounts, dimensions and adjusters vary by kit.

Manufacturer fitting material for both rear-wheel-drive and AWD G22 shows the rear coil spring seated on a suspension arm separately from the damper. The illustration identifies that steel-spring component layout. It is not a parts drawing for a listed kit or a diagram of every G26 or i4 suspension.

Confirm the rear arrangement supplied with the chosen kit. AST's variants have different construction and mounting descriptions, so ask whether the exact package retains a separate rear spring or uses a rear coilover. Have any change of arrangement and its mounting requirements checked by the supplier and builder before ordering. A family photograph does not identify the complete assemblies.

Agree the height-setting method, usable adjustment range and retained parts for your car. Have clearance and travel checked with the actual wheels, tyres and normal load. Set the height before final alignment and any required steering or sensor procedures.

Understand height and spring preload
Dark-green BMW G26 Gran Coupé outside a workshop with a mechanic holding a clipboard

Confirm the complete parts and fitting quote

Have the workshop inspect the original dampers, mounts, arms, bushes and joints. Identify passive or electronic damping and any previous changes. Confirm the exact front and rear assemblies, supplied or retained mounts, springs and droplinks. For Eibach, resolve note A and check the certificate, component markings and any extra OE parts. For AST, confirm the G22 application against the mixed-model set descriptions.

Provide wheel widths, offsets, tyre sizes and spacers, including both sets if you use different circuit wheels. Include checks through steering and suspension movement at the intended height and normal load. Agree the electronic work, retained functions, alignment, any required steering or sensor procedures and follow-up checks before booking the car in.

Original electronic dampers

Check the actual equipment before choosing a mechanical replacement. Eibach Note 21 excludes cars with electronic suspension. Note 176 kits include PRO-TRONIC to suppress the damper error message, but you lose electronic damping control. Confirm the exact condition and retained functions. AST's EDC row and a BC body label do not establish retained electronic damping.

Wheels, tyres and clearance

Give the fitter the actual widths, offsets, tyre sizes and spacer details. Check clearance to the dampers, springs, arches and liners through steering and suspension movement. Include your normal load and every wheel set you intend to use.

Mounts, rear assemblies and droplinks

Confirm the mounting parts supplied with the exact kit and inspect any retained originals. BC's I-116 BR RA and RM MA front assemblies differ. AST's OE-mount, front-mount and competition variants need their own parts checks. The AST G22 row names DLA-10-233-251; confirm inclusion and the complete front and rear contents.

Axle ratings, height and technical documents

Match Eibach's exact engine and axle-load limits to the car, resolve note A and check the required component markings and additional parts. Factory lowering changes the starting height for any quoted drop. Agree the usable range from the exact kit and actual car, then set the height before final alignment.

The current G22 / G26 range.

Compare the controls and hardware included in each range.

BC Racing

The current G26 routes are I-116 RWD with BR RA or RM MA options, and I-151 AWD with BR RA. BR RA lists pillowball front and rubber rear mounts; RM MA has inverted front damper construction. Confirm the ordered mounts and rear assemblies. The shop lists nominal front/rear rates of 5/10 kg/mm for I-116 and 6/10 kg/mm for I-151; choose the complete specification for the exact car and use. The joint G21/G26 application and shared starting date do not establish every engine, build or electronic configuration. These listings do not provide a G22 BC offer.

View BC Racing G22 / G26 kits

AST

The five listed AST kits name G22 M440i xDrive, with EDC and NON-EDC rows. The 5100 variants have rebound adjustment; the 5200 adds separate compression adjustment, and the 5300 separates high- and low-speed compression. Keep OE-mount ACU, front-mount ACT and competition variants distinct, with exact mounts and rear construction confirmed. Some short set descriptions omit G22 despite its application rows, so have GSM reconcile the ordered reference. Front droplink DLA-10-233-251 is assigned to the G22 row; confirm inclusion. These entries do not establish G26 or other G22 engine fitment.

View AST G22 / G26 kits

Eibach

Pro-Street-S entries separate G22 engines, drivetrain, axle limits and original damping. The listed G26 route is PSS65-20-045-09-22 for rear-wheel drive with its own engine and equipment conditions. Note 21 excludes cars with electronic suspension. Note 176 kits include PRO-TRONIC to suppress the damper error message, but you lose electronic damping control. The listings refer to footnote A without defining it. Ask GSM to clarify that condition and confirm the exact certificate, markings and extra parts before ordering. The joint G22/G82 model heading does not approve M4 fitment.

View Eibach G22 / G26 kits

Find your G22 / G26 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

16 listings

Selected application: All G22 / G26 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

6 of 16 shown
All G22 / G26 kit links and part numbers

Before you order.

  1. Identify your car

    Send the full model and engine, G22 or combustion-engine G26 body, build date and original market. State rear-wheel drive or xDrive and provide the permitted axle ratings.

  2. Match the kit

    Identify the original dampers and other relevant equipment against the build specification and actual parts. Include any previous suspension, mount, brake or wheel changes.

  3. Check what’s included

    Have the exact kit and configuration confirmed, including the complete rear arrangement, mounts, droplinks and retained components. Resolve Eibach note A and the exact technical-document conditions.

  4. Check your modifications

    Provide wheel widths, offsets, tyre sizes and spacers, plus your normal load. Agree a usable height with clearance and travel checked through steering and suspension movement.

  5. Plan fitting

    Agree which electronic functions remain and the work required. Include worn parts, height setting, alignment, any required steering or sensor procedures and follow-up checks in the quote. Confirm availability before booking.

Questions about BMW G22 / G26 coilovers.

Check the details before choosing your kit.

Does this guide establish G23, M4 or i4 fitment?

The qualified enquiries here concern the non-M4 G22 Coupé and combustion-engine G26 Gran Coupé. The G23 Convertible, M4 and electric i4 need separate applications. A joint G22/G82 product heading or shared G26 designation does not approve those cars.

Which G26 references should I discuss?

For BC, discuss I-116 for rear-wheel drive and I-151 for AWD, with the exact engine, build and equipment checked. The listed Eibach Gran Coupé reference is PSS65-20-045-09-22 for its named RWD engines and conditions. The AST entries here do not establish G26 fitment.

Which G22 model do the AST entries name?

The current application rows name M440i xDrive G22 with EDC and NON-EDC versions. They do not establish other G22 engines or RWD fitment. Confirm the exact build, ordered reference, mounts, rear assemblies and electronic work. An EDC application row does not promise retained electronic damping.

Does PRO-TRONIC retain electronic damping?

PRO-TRONIC suppresses the damper error message on the listed Eibach note 176 kits, but it does not retain electronic damping control. Note 21 excludes cars with electronic suspension. Have GSM clarify footnote A and confirm the exact part's conditions before ordering.

Why are there different Eibach parts for the same body?

The application entries separate engine, RWD or xDrive, axle-load limits and original electronic damping. The G26 entry has its own limits and excludes 4WD, electronic suspension and levelling control. Match the exact part, component markings and certificate to your car, including note A and any extra OE parts. A body-code match alone is insufficient.

Are I-116 BR RA and RM MA just different mounts?

RM MA has different inverted front damper construction. Compare the complete front assemblies, mounts and supplied rear components for the confirmed RWD G26 application. I-151 is a separate AWD BR RA listing. Confirm the ordered specification; the shared parent listing does not make the two I-116 configurations physically identical.

Is the rear spring separate from the damper?

The steel-sprung G22 layout shown here has a separate rear coil spring and damper. Confirm the exact replacement kit's rear construction and mounting requirements, especially when comparing AST variants. The conceptual factory-layout illustration does not show every supplied kit or the suspension on every G26 or i4.

How low should I set the car?

Agree a height within the exact kit's usable range that leaves travel and clearance for your wheels, tyres, roads and usual load. Check the factory starting height before using a quoted lowering figure. Have the height set and suspension settled before final alignment and any required steering or sensor checks.

Let’s talk suspension.

Send GSM your car's body style, engine, drive layout and build details, with the original dampers and any changes identified. Include your wheels, tyres, normal load and intended use so they can check the exact kit, supplied parts and complete fitting work.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.