Steel-blue Deepal SL03 on silver multispoke wheels beside a stone-and-glass courtyard with green hills behind

Deepal SL03 / L07 (C385).
The coilover guide.

Shop the coilovers

BC lists separate SL03/L07 references for battery-electric and range-extender cars. Match the powertrain, build date and market before choosing the kit.

Which SL03 / L07 (C385) do you have?4 listed kits · 1 brandReviewed 17 November 2026

The SL03 and the export L07 name

Set the height around your wheels, tyres and normal load. Leave enough clearance for the roads you use, including speed humps and sloping entrances.

Check the full part number even when two kits have the same price. For an older Changan listing, confirm the replacement reference and the parts that will be supplied.

The SL03 launched in China in July 2022. Changan included it among its new products for that year and presented it as Deepal’s first strategic model. Its low fastback roof, long side glazing and slim upper lamps give it a recognisable outline. Those details help identify the body; they do not identify its suspension specification.

Battery-electric and range-extender versions share the SL03 name. Changan’s Thailand introduction used L07 for the car called SL03 in China. Export specifications still need checking by market and build date rather than by the badge alone.

The Nepal L07 battery-electric specification describes rear-wheel drive, MacPherson front suspension and an H-arm multi-link rear. That is useful context for that regional BEV. It does not establish identical mounting parts, springs or electronic equipment across every SL03 and L07.

BC’s current list separates SL03/L07 BEV YT-01 from EREV YT-02, and gives the newer L07 EREV 24+ its own YT-03 reference. Keep that later listing separate. A kit list’s 21+ label is an application label, not the SL03’s launch date.

Start with your SL03 / L07 (C385).

Confirm the chassis, year and existing suspension before choosing your setup.

Steel-blue modified Deepal SL03 on silver wheels in a stone courtyard

Battery-electric, rear-wheel drive

YT-01 is BC’s current SL03/L07 BEV RWD reference. Match the car’s market, build details and original suspension, then confirm the exact kit contents. A shared body shape is not enough to substitute the range-extender reference.

See the BEV listing
Pearl-white Deepal SL03 on silver wheels beside modern brick buildings

Range-extender, rear-wheel drive

YT-02 names the SL03/L07 EREV RWD. Keep its powertrain designation with the order. Confirm rear hardware, mounting parts and equipment for the actual car; the 515 BEV example below does not establish the arrangement on an EREV.

See the EREV listing
Graphite Deepal SL03 viewed from the rear beside an industrial warehouse

Older Changan references

The YM-03 listing says discontinued, use YT-01; YM-04 says discontinued, use YT-02. Both older listings remain in the current catalogue. Confirm what will actually be supplied, its full reference and the car it covers before ordering or booking fitting.

Check the older references
Silver-blue Deepal SL03 on silver wheels in a coastal layby

Export cars and the L07 badge

Provide the car’s original market, build date and powertrain. BC gives L07 EREV 24+ a separate YT-03 reference, so check that application independently.

Check my market and build
Burgundy Deepal SL03 standing normally outside an independent workshop

Original equipment and previous changes

Identify the springs, dampers and mounts fitted now. Include any electronic damper connections, warning messages or earlier suspension work. Confirm the required hardware and electrical plan; a BR-RS label does not settle those details.

Check my suspension equipment
Graphite modified Deepal SL03 outside closed circuit garages

Other versions and developed projects

A different powertrain, later L07 or altered mounting arrangement needs its own check. For a circuit project, include measured weight, tyres, brakes and the events planned. These four listings do not establish a kit for every C385 derivative.

Discuss my SL03 project

What do you want
from the car?

Choose advice for everyday driving, occasional circuit days or a dedicated track project.

Selected configurationSee optionsinc. VAT · Matching SL03/L07 BEV RWD / BC Racing BR-RS YT-01

Choose a usable height for your roads and normal load.

Read the buying advice

BC Racing BR-RS YT-01 names the SL03/L07 BEV RWD. The current listing records rubber top mounts and nominal 5 kg/mm front and 11 kg/mm rear springs. Confirm supplied mounts, rear seats and adjusters for the exact kit. Match the car’s market and build details, then set the height with room for steering and suspension movement.

  • Match the BEV RWD reference
  • Confirm mounts and rear hardware
  • Leave clearance for daily use
View current configurations

Explain the tyre and event plans before choosing the setup.

Read the buying advice

Include the powertrain, tyre sizes, wheel offsets, brake changes and intended events. Discuss the spring and damper specification with the people preparing the car, including heat, load and inspection requirements for that use. The product listing alone does not establish track-day suitability.

  • Describe tyres and intended events
  • Check load and travel requirements
  • Agree setup and follow-up
Discuss road and track-day use

Specify the suspension around the completed car.

Read the buying advice

Provide measured weight, tyres, brakes, mounting changes and any aero. Keep the BEV or range-extender identification with those details. Agree the spring, damper and mounting requirements, clearance checks and inspection work before choosing parts. A body code or an adjustable damper is not competition approval.

  • Measure the completed car
  • Match springs, dampers and mounts
  • Plan clearance and inspection work
Discuss an SL03 circuit build

A separate rear spring in the 515 BEV example.

Separate rear spring and damperThe coil spring rests between its own seats, beside a separate shock absorber. This fixed component diagram does not show vehicle dimensions, mounting hardware or suspension movement.SpringDamper

Representative 515 BEV rear layout: a spring supported by the H-arm and a separate damper.

Component layout only. Mounts, dimensions and adjusters vary by kit.

In the 515 BEV showroom example, the rear coil spring sits on the H-arm, separate from the damper. Check the spring seats, height adjusters and mounts supplied with the exact replacement kit.

Confirm the rear arrangement on an EREV or export car before ordering. The diagram identifies component positions only; it does not show mounting dimensions, H-arm geometry or how a replacement kit changes height.

Understand height and spring preload
Steel-blue Deepal SL03 on silver multispoke wheels standing normally on a level workshop floor

Check the hardware before setting the height.

Ask the workshop to identify the existing spring and damper arrangement and compare it with the chosen kit’s parts list. Confirm which mounts, seats and fixings are supplied, retained or renewed.

Agree the finished height using the actual wheels, tyres and normal load. Allow time for measured alignment, equipment checks and the required follow-up, as well as the fitting itself.

Identify the parts fitted now

Record the car’s build, market and powertrain, then inspect springs, dampers, mounts and electrical connections. Include previous replacements or conversions so the order is checked against the car as it stands.

Check the whole wheel and tyre package

Give the fitter wheel width, offset, tyre size and any spacers. Check clearance to suspension parts and bodywork through steering and suspension movement, with the usual passenger and luggage load.

Keep usable ground clearance

Check underbody clearance as well as the wheel-arch gap. Include speed humps, sloping drives and workshop access when agreeing the height. A small arch gap does not tell you how much suspension movement remains.

Finish with measured checks

Inspect bushes, joints, spring seats and mounts before fitting. Follow the exact kit instructions, then check alignment and clearance. Ask the fitter which lighting, assistance or suspension-system checks and follow-up inspection the car needs.

The current SL03 / L07 (C385) range.

Compare the controls and hardware included in each range.

BC Racing

Current YT-01 and YT-02 BR-RS references separate SL03/L07 BEV RWD from EREV RWD. The merchant attributes record rubber top mounts, with nominal 5/11 kg/mm springs for the BEV and 5.5/11 kg/mm for the EREV. Confirm the exact supplied components and current application. The older YM-03/YM-04 records retain their discontinued and replacement-reference notes.

View BC Racing SL03 / L07 (C385) kits

Find your SL03 / L07 (C385) coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

4 listings

Selected application: All SL03 / L07 (C385) applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

All SL03 / L07 (C385) kit links and part numbers

Before you order.

  1. Identify your car

    Identify the original market, build date and BEV or range-extender powertrain. Include the exact SL03 or L07 model details.

  2. Match the kit

    Match the full reference: YT-01 BEV or YT-02 EREV. Resolve YM-03/YM-04 replacement notes and later L07 applications separately.

  3. Check what’s included

    Confirm supplied mounts, rear spring seats, adjusters and fixings. Resolve electronic equipment and previous suspension changes.

  4. Check your modifications

    Record wheel width, offset, tyres and spacers. Check steering, suspension and underbody clearance with the normal load.

  5. Plan fitting

    Confirm what will be supplied and when before booking fitting. Agree the height, alignment, equipment checks and follow-up.

Questions about Deepal SL03 / L07 (C385) coilovers.

Check the details before choosing your kit.

Does the SL03 guide also cover the L07 name?

It covers the SL03/export L07 family represented by these current listings. Changan used L07 for the car named SL03 in China when introducing it in Thailand. Check the market, build date and powertrain. BC’s L07 EREV 24+ listing has a separate YT-03 reference and needs its own application check.

Are YT-01 and YT-02 interchangeable?

BC lists YT-01 for SL03/L07 BEV RWD and YT-02 for SL03/L07 EREV RWD. Keep the correct powertrain reference with the order. A matching body code or price does not establish interchangeability.

What do the YM-03 and YM-04 replacement notes mean?

Both older references are marked discontinued: YM-03 points to YT-01 and YM-04 to YT-02. Confirm the reference and parts that will actually be supplied for your car, even if the older listing shows stock.

Are the rear spring and damper separate?

The documented 515 BEV showroom example has a coil supported by the H-arm and a separate damper. Confirm the arrangement on an EREV or export car, and check the exact replacement kit’s seats, adjusters and mounts. The compact diagram is a representative component layout, not a fitting drawing.

Which spring rates and mounts are listed?

The current merchant attributes record BR-RS rubber top mounts, nominal 5 kg/mm front and 11 kg/mm rear for the BEV references, and 5.5/11 kg/mm for the EREV references. Confirm the specification and supplied components for the exact order; these values are not a universal setup recommendation.

Does the newer L07 EREV use the same reference?

BC’s current list gives L07 EREV 24+ a separate YT-03 reference. It is outside the four listings grouped here. Provide the full model, market, build date and equipment for its own application check.

Will a coilover kit retain electronic damper functions?

Identify what is fitted to the actual car first. These listings do not establish retention of every original electronic function or inclusion of cancellation hardware. Agree the mechanical and electrical plan with the fitter before ordering.

How low should I set the car?

Use the exact kit’s instructions and permitted adjustment range, then check the real wheels, tyres, normal load and roads. Leave clearance for steering, suspension movement and the underbody. Agree alignment and any affected equipment checks after setting the height.

Let’s talk suspension.

Find your SL03 or export L07, then include its market, build date, powertrain and original suspension. Add wheel and tyre details and any previous changes so the exact application can be checked.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.