
Fiat 500X (334).
The coilover guide.
Shop the coiloversBilstein lists separate kits for front- and four-wheel-drive 500Xs, and BC lists a front-drive kit. Confirm the drivetrain before ordering.
Fiat 500X history
The 500X, type 334, is Fiat's small crossover, built from 2014 alongside the Jeep Renegade. BC lists BCR-ZO-05 for front-drive cars at 5 kg/mm front and 2.5 kg/mm rear.
Bilstein lists B14 47-259751 for front-drive cars and 47-265417 for four-wheel drive, both with 20-40 mm lowering.
Fiat launched the 500X in 2014 on the small-wide platform it shares with the Jeep Renegade, built in Italy. Front- and four-wheel-drive versions were offered.
Engines ranged from 1.0 and 1.4 petrol turbos to 1.3, 1.6 and 2.0 diesels. A facelift followed in 2018.
The Cross versions have different bumpers and a slightly raised look, but use the same chassis code.
Start with your 500X (334).
Match the model year, drivetrain and body style before comparing brands.

Front-drive 500X
BC lists BCR-ZO-05 and Bilstein lists 47-259751 for front-drive 500Xs. Give the supplier the VIN and engine.
Check my 500X
Four-wheel drive
Bilstein lists 47-265417 for 4x4 cars, with a different fixing-hole pitch. The front-drive kits will not suit them.
Check my 4x4 500X
Jeep Renegade twin
Bilstein lists the same B14 kits for the Jeep Renegade. Confirm the drivetrain and axle load ratings.
Check my 500X CrossChoose a kit for your car and driving
Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.
BC lists BCR-ZO-05 for front-drive cars. Confirm the drivetrain first.
Read the buying advice
BCR-ZO-05 is a possible starting point once the supplier has confirmed fitment. It has 30-way rebound adjustment and height set separately from spring preload. Keep the drop modest on a crossover and include alignment.
- Confirm front-drive
- Keep the drop modest
- Include alignment
Bilstein lists 47-259751 for front-drive 500Xs, with fixed damping.
Read the buying advice
B14 sets the height on a thread with fixed, vehicle-specific damping and 20-40 mm lowering. Check the axle load ratings against the car.
- Confirm front-drive
- Check axle ratings
- Include alignment
Bilstein lists 47-265417 for 4x4 cars.
Read the buying advice
The 4x4 kit has a different fixing-hole pitch and higher axle load ratings. Confirm the drivetrain and keep the drop modest.
- Confirm 4x4
- Check axle ratings
- Include alignment
Know how the suspension is laid out
On a standard Fiat 500X, the rear spring and shock absorber are mounted separately.
Layout only. Mounts and spring seats vary by kit.The 500X has independent suspension at both ends. Bilstein sets the height on a thread at each axle; BC lists default rates of 5 kg/mm front and 2.5 kg/mm rear.
Check the alignment at the final ride height.
Read about ride height and spring preload
Plan the fitting before the car arrives
Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.
Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.
Confirm the drivetrain
Check the VIN to confirm whether the car is front- or four-wheel drive, and check the axle load ratings.
Measure the wheel and tyre clearance
Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.
Leave travel for normal use
Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.
Set the geometry after the height
Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.
The current 500X (334) range.
Compare the controls and hardware included in each range.
BCR-ZO-05 is listed for the front-drive 500X from 2014, with 30-way rebound adjustment and default rates of 5 kg/mm front and 2.5 kg/mm rear.
View BC Racing 500X (334) kitsB14 47-259751 is listed for front-drive 500Xs and Renegades (58 mm fixing-hole pitch, axle loads to 1050 kg front and 930 kg rear) and 47-265417 for 4x4 cars (72 mm pitch, to 1150 kg front and 1000 kg rear). Both have 20-40 mm lowering with fixed damping.
View Bilstein 500X (334) kitsFind your 500X (334) coilovers.
Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.
3 listings
Selected application: All 500X (334) applications
Match the drivetrain, body style and axle-load limits on the product page before ordering.

Bilstein · 47-259751
Bilstein B14 Coilover Kit - FIAT 500X (334_) / JEEP RENEGADE SUV (BU, B1) - 47-259751
Check the exact application
![BC Racing Coilovers - Fiat Fiat 500X (FWD) (14+) [334]](/images/09cf8cd191b679-480.webp)
BC Racing · BCR-ZO-05
BC Racing Coilovers - Fiat Fiat 500X (FWD) (14+) [334]
Check the exact application

Bilstein · 47-265417
Bilstein B14 Coilover Kit - FIAT 500X (334_) / JEEP RENEGADE SUV (BU, B1) - 47-265417
Check the exact application
All 500X (334) kit links and part numbers
Before you order.
Identify your car
Send the VIN, engine, drivetrain and axle load ratings.
Match the kit
Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.
Check what’s included
Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.
Check your modifications
Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.
Plan fitting
Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.
Questions about Fiat 500X (334) coilovers.
Check the details before choosing your kit.
Does it fit a 4x4 500X?
Use Bilstein 47-265417 for 4x4 cars. BC and the other Bilstein kit are for front-drive cars.
Does it fit the 500L?
No. These kits are listed for the 500X.
How low should I set the car?
Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every 500X. Check the alignment at the final height.
When should I book fitting?
Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.
Let’s talk suspension.
Send the 500X's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.



