Championship White Honda Integra Type R DC2 on white wheels in a Peak District lay-by

Honda Integra DA and DC2 1990-2001.
The coilover guide.

Shop the coilovers

The DC2 Integra Type R is one of the best front-drive cars ever made. Confirm the chassis and rear mount type before choosing a kit.

Which Integra DA and DC2 1990-2001 do you have?9 listed kits · 5 brandsReviewed 21 November 2026

Honda Integra DA and DC2 history

The second Integra (DA) ran from 1989 to 1993 and the third (DB and DC2) from 1993 to 2001, with the DC2 Type R from 1995. BC lists BCR-A-104 for the 1990-1993 DA and BCR-A-34 and BCR-A-35 for the 1992-2000 DC2 by rear mount, all at 9 kg/mm front and 4 kg/mm rear.

MOTON, SPAX, TEIN and Nitron list kits too.

Honda's second Integra brought the B16A VTEC engine in Japan. The third generation of 1993 included the DC2 coupe and DB saloon.

The DC2 Type R arrived in Japan in 1995 and in the UK in 1998, with a hand-finished B18C engine and a seam-welded body. The DC5 replaced it in 2001.

Many have been modified or tracked, so check the car's history.

Start with your Integra DA and DC2 1990-2001.

Match the model year, drivetrain and body style before comparing brands.

Red Honda Integra DC2 coupe on silver wheels on a country lane

DA and DC2

BC lists BCR-A-104 for the DA and BCR-A-34 and BCR-A-35 for the DC2 by rear eye or fork. SPAX lists RSX117 for the UK DC2.

Check my Integra
Yellow Honda Integra Type R DC2 in a circuit paddock

Type R DC2

MOTON lists two- and three-way kits and Nitron lists R1 and R3 for the DC2 Type R. TEIN lists a Mono Sport kit.

Check my Type R
Championship White Honda Integra Type R DC2 in a Peak District lay-by

Imported Type R

Many DC2 Type Rs are Japanese imports. Confirm the chassis code and condition.

Check my import

Choose a kit for your car and driving

Tell the supplier about your tyres, usual roads and any circuit plans. Budget for fitting, alignment and setup as well as the kit. Each example below still needs an application check for your exact car.

Selected configurationSee optionsinc. VAT · BC Racing BCR-A-34, subject to an application check

BC Racing lists BCR-A-34 for the 1992-2000 Integra DC2 with a rear eye mount. Confirm the chassis code first.

Read the buying advice

Have the supplier confirm fitment from the VIN. Keep the drop modest, check clearance with your wheels and include alignment. BCR-A-35 suits a rear fork.

  • Confirm the chassis code
  • Keep the drop modest
  • Include alignment
View current configurations
Selected configurationSee optionsinc. VAT · MOTON M 504 041S, subject to an application check

MOTON lists M 504 041S for the DC2 Type R.

Read the buying advice

MOTON also lists M 504 043S. Both use remote reservoirs and are made to order. Agree settings and confirm the lead time.

  • Confirm the Type R
  • Agree settings
  • Confirm lead time
View current configurations

Nitron lists R1 and R3 kits for the Integra DC2. Agree the specification with Nitron.

Read the buying advice

R1 has one combined damping adjuster; R3 sets rebound and both compression speeds separately. Agree rates, valving and settings, and confirm delivery timing.

  • Confirm the chassis
  • Agree rates and valving
  • Confirm delivery timing
Discuss a Nitron kit for my Integra DC2

Know how the suspension is laid out

Separate rear spring and damperA spring between its own upper and lower seats sits beside a separate shock absorber.SpringDamper

On a standard Honda Integra, the rear spring and shock absorber are mounted separately.

Layout only. Mounts and spring seats vary by kit.

The Integra uses double wishbones front and rear, with the spring and damper together, so a coilover kit replaces like with like. Confirm the rear mount type where kits differ.

Check camber and toe at the final ride height.

Read about ride height and spring preload
Black Honda Integra DA standing on its wheels beside an empty two-post lift in a suspension workshop

Plan the fitting before the car arrives

Give the workshop the kit reference and the car's options list before it orders fitting parts. Have it check the top mounts, bearings, bushes and drop links, and ask for a written list of the parts it will reuse or replace.

Once fitted, check clearance with the actual wheels and tyres through steering lock and suspension travel. Let the car settle at the agreed height before alignment, and record the starting damper settings.

Confirm the chassis and rear mount

Check the chassis code and whether the rear damper has an eye or fork mount.

Measure the wheel and tyre clearance

Give the fitter the wheel width, offset and tyre size, including any spacers. At the intended height, check tyre clearance to the arches and wheel clearance to the springs, dampers and adjusters.

Leave travel for normal use

Tell the workshop about your usual roads and what the car usually carries. At the proposed height, check how much room remains for the suspension to compress with the kit's bump stops fitted.

Set the geometry after the height

Have the car aligned once the ride height is final and the suspension has settled. Get the readings and starting damper settings recorded.

The current Integra DA and DC2 1990-2001 range.

Compare the controls and hardware included in each range.

BC Racing

BCR-A-104 is listed for the Honda Integra (Rear Fork) (90-93) [DA5-DA9] at 9 kg/mm front and 4 kg/mm rear. BCR-A-34 is listed for the Honda Integra (Rear Eye) (92-00) [DC2] at 9 kg/mm front and 4 kg/mm rear. BCR-A-35 is listed for the Honda Integra (Rear Fork) (92-00) [DC2] at 9 kg/mm front and 4 kg/mm rear. All have 30-way rebound adjustment.

View BC Racing Integra DA and DC2 1990-2001 kits

MOTON

MOTON lists M 504 041S (MOTON 3-Way Motorsport) and M 504 043S (MOTON 2-Way Motorsport) for this car. Confirm the exact chassis and version from the listing.

View MOTON Integra DA and DC2 1990-2001 kits

SPAX

SPAX lists RSX117 (SPAX RSX) for this car. Confirm the exact chassis and version from the listing.

View SPAX Integra DA and DC2 1990-2001 kits

Nitron

Nitron lists NTCHO019R1, NTCHO019R3 for this car. R1 has a combined damping adjuster; R3 has separate rebound and compression controls. They are supplied to order.

View Nitron Integra DA and DC2 1990-2001 kits

TEIN

TEIN lists GSH48-71SS1 (TEIN MONO SPORT) for this car. Confirm the exact chassis and version from the listing.

View TEIN Integra DA and DC2 1990-2001 kits

Find your Integra DA and DC2 1990-2001 coilovers.

Prices include UK VAT. Choose an application and brand, then open a kit for its current options and availability.

9 listings

Selected application: All Integra DA and DC2 1990-2001 applications

Match the drivetrain, body style and axle-load limits on the product page before ordering.

6 of 9 shown
All Integra DA and DC2 1990-2001 kit links and part numbers

Before you order.

  1. Identify your car

    Send the chassis code, version and rear mount type.

  2. Match the kit

    Confirm the full kit reference for your car and check that it covers your engine, drivetrain and build date.

  3. Check what’s included

    Ask for a written list of the mounts, springs and fitting parts supplied with the kit. Confirm which existing parts will be reused and which need replacing.

  4. Check your modifications

    Supply wheel width, offset and tyre size, together with the intended use. Agree a height with adequate clearance and suspension travel.

  5. Plan fitting

    Get fitting, alignment and setup quoted together. Confirm delivery timing before reserving workshop time.

Questions about Honda Integra DA and DC2 1990-2001 coilovers.

Check the details before choosing your kit.

Which BC kit fits my DC2?

BCR-A-34 for a rear eye mount and BCR-A-35 for a rear fork.

Does it fit the DC5?

No. The DC5 has its own guide.

How low should I set the car?

Choose the height with the fitter using the kit instructions, wheel clearance and room for suspension movement. A lowering range shows what is available, not a target for every Integra. Check the alignment at the final height.

When should I book fitting?

Agree the specification and delivery timing with the supplier first, then book fitting and alignment once the parts are confirmed.

Let’s talk suspension.

Send the Integra's engine, build date, options list and current suspension details. Include the kit reference you are considering so the application and fitting parts can be checked together.

Call Coilovers Direct0115 647 9207
or

Your registration isn’t saved to your garage.

Ask about my carFind the listed kits above, or ask us about your setup.